与适配器一起提供的驱动程序没有编译。我下载了一个ASIX驱动程序ver4.6.0。它编译了,我加载了模块。lsusb命令重新定位以下内容:Bus 002 Device 001: ID1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root h
似乎太聪明了,在设备中插入了一个记忆棒控制器来存储窗口驱动程序。我从这里编译并修改了驱动程序https://github.com/diederikdehaas/rtl8812AU,看起来一切都很好,但我仍然只在dmesg中显示记忆棒。On Debian, this is not needed, since the driver is included as a
Linux kernel module, such as "usbserialBus 001 Device 001: ID 1d6
我已经购买了一个D-链接DWA 131(硬件版本-E1) wifi -适配器,我已经为same.But安装了必要的驱动程序-适配器给我一个低信号强度时,wifi路由器在隔壁的房间,当我使用这个适配器在窗口Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 2001:3319 D-Link<