我在Ubuntu18.04.4LTS上运行Arduion IDE 1.8.12。
我正在尝试编译ESP32相机模块的示例代码(在Arduino IDE上使用默认示例的标准相机模块),我得到了这个错误(我认为这不是Arduino问题,而是Python):
"exec: "python": executable file not found in $PATH
Error compiling for board ESP32 Wrover Module"
所有ESP32都有相同的消息。
我也做过sudo apt安装python。拿回这个:
Reading packag
我不能从我的桌面上传到各种Wemos D1迷你或ESP32CAM板。尝试不同的USB端口,电缆和上传速度。我可以上传没有问题的Arduino Uno,和洛林D32专业。
用我的笔记本电脑所有的板都上传的很好。这两台机器都是linux。
在失败的桌面上,通过Sparkfun连接的ESP32CAM,我在dmesg中看到:
[179321.007480] usb 6-1: New USB device found, idVendor=0403, idProduct=6001
[179321.007484] usb 6-1: New USB device strings: Mfr=1, Product
我收到下面的错误。我按了esp32摄像头的复位按钮,但没有工作。帮帮忙吧。Arduino: 1.8.12 (Windows 10),板:"AI Thinker ESP32-CAM,160 QIO (WiFi/BT),QIO,80 QIO“
Sketch uses 699158 bytes (22%) of program storage space. Maximum is 3145728 bytes.
Global variables use 38104 bytes (11%) of dynamic memory, leaving 289576 bytes for local vari
我想通过BLE (https://github.com/xabre/xamarin-bluetooth-le)从我的Xamarin Forms (C#) iOS应用程序发送一个文件(bin)到我的ESP32 (Arduino)。该文件将是用于更新的bin文件。我已经找到了一个关于如何更新ESP32 out of spiffs (arduino-esp32 do OTA via BLE)的解决方案,但是有人知道我如何用ESP32接收文件并将其保存到spiffs中吗? ( esp32的BLE连接应用已经完全正常工作了,我可以发送文本,但我不知道如何发送文件) 最好的问候nflug
使用github项目的事宜协议遵守ESP32项目: Connectedhomeip ()
我使用ubuntu20.02,尝试使用python3.8和3.9没有差别的错误。
我遵循上述链接中的以下说明,如下所示:
Building the Example Application
Building the example application requires the use of the Espressif ESP32 IoT Development Framework and the xtensa-esp32-elf toolchain for ESP32 modules or the r
Alternatives for bits/c++config.h: [] ResolveLibrary(bits/c++config.h) -> candidates: [] In file included from c:\users\dell\onedrive - national university of sciences & technology\documents\arduinodata\packages\esp32\tools\xtensa-esp32-elf-gcc\1.22.0-97-gc752ad5-5.2.0\xtensa-esp32-elf\includ