esphome如何使用集成4继电器为模块esp01写入配置

esphome:
  name: esp01_relay_board
  platform: ESP8266  # 或者 ESP32，取决于你的模块
  board: esp01  # 适用于 ESP01 的板子

wifi:
  ssid: "your_wifi_ssid"
  password: "your_wifi_password"

# 定义 I2C 总线（如果继电器模块通过 I2C 连接）
i2c:
  sda: 21
  scl: 22
  scan: true

# 定义继电器
relay:
  - platform: gpio
    id: relay_1
    pin: D1  # 根据你的模块修改 GPIO 引脚
  - platform: gpio
    id: relay_2
    pin: D2
  - platform: gpio
    id: relay_3
    pin: D3
  - platform: gpio
    id: relay_4
    pin: D4

# 可选：如果你想为继电器添加开关实体
binary_sensor:
  - platform: gpio
    name: "Relay 1 Switch"
    pin: D1
    device_class: switch
    state_on: HIGH
    state_off: LOW
  - platform: gpio
    name: "Relay 2 Switch"
    pin: D2
    device_class: switch
    state_on: HIGH
    state_off: LOW
  - platform: gpio
    name: "Relay 3 Switch"
    pin: D3
    device_class: switch
    state_on: HIGH
    state_off: LOW
  - platform: gpio
    name: "Relay 4 Switch"
    pin: D4
    device_class: switch
    state_on: HIGH
    state_off: LOW