我使用的是Ubuntu14.04,我的以太网(eth0)连接工作正常。(与DHCP)
然而,当我阅读/etc/network/interfaces时,它中没有任何关于eth0的内容。
Ubuntu14.04是否正在从其他地方读取eth0设置?
$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
我想用静态地址设置我的eth0,但我不明白为什么eth0没有任何地方?
我有一个Debian 7服务器,可用的IP地址范围从xx.90到93。在通过/etc/网络/接口设置可用地址时,我有以下内容:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
根据web3:的文档,我可以使用:
web3.eth.accounts.privateToAccount("0x78...");
我有一个错误:
TypeError: 'privateToAccount' is not a function
at <anonymous>:1:1
定义了web3.eth.accounts:
> web3.eth.accounts
["0x78...", "0xf3..."]
我的问题是:为什么没有定义函数'privateToAccount‘?
另外,web3.eth
我有一个问题,了解tc行为,特别是如何工作的qdisc删除。我的主要问题是为什么tc qdisc没有删除附加的过滤器?我做了:
tc qdisc add dev eth ingress
tc qdisc add dev eth parent ffff....
tc filter add dev eth protocol ip....
tc qdisc del dev eth root
最后一条命令应该删除qdisc及其附带的过滤器,但当我删除时
tc filter show dev eth
过滤器仍然存在。我是否做错了什么,还是只能通过命令tc filter del...删除筛选器?
ifconfig命令显示: enp0s3接口和lo循环回网络接口,但当我这样做时
cat /etc/network/interfaces
它是空的
#interfaces(5) file used by ifup(8) and ifdown(8)
#Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
但界面显示
#interfaces(5) file used by ifup(8) and ifdown(8)
#Include files from /etc/
下面是我问题的简化版本:为什么在网络接口文件中设置gateway参数对我的网络接口没有影响?
或者,为什么post-up命令在gateway失败的情况下工作,以及设置gateway参数的确切目的是什么?
这是我的问题的较长的描述。
考虑运行Debian的/etc/network/interfaces VM上的以下网络接口配置文件( VirtualBox ):
# /etc/network/interfaces
# Original file
# The loopback network interface
auto lo
iface lo inet loopback
# The prim
我正在使用最新的Arch Linux。但是,每当我启动我的电脑,它有时会得到一个IP地址,但大多数时候,它会给我压力。我很困惑,怎么才能确定它真的是在设置DHCP IP呢?
这就是我所拥有的:
在rc.conf中:
DAEMONS=( ... network dhcpcd )
我在~/.xinitrc中的系统引导
ip link set dev eth0 up
ip link set dev eht1 up
dhcpcd -t 100
但是现在,我已经重新启动了10次,而且我没有任何IP地址。
昨天,我有接口eth0,eth1,lo。在这个奇怪的IP问题之后,现在我用相同的配置成功地引导回我的