我正在尝试一个Slackware 14.2。我可以通过/etc/rc.d/rc.inet1 sshd start启动sshd,但我的问题是如何添加服务,以便在松弛的linux上启动?基本上,如何在Slackware Linux上将服务永久添加到系统中,并检查服务状态。到目前为止,我能够使用这个链接实现上述目标,
$ sudo nano /etc/rc.d/rc.M
加上这些行
# Start the sshd server
if [ -x /etc/rc.d/rc.sshd ]; then
. /etc/rc.d/rc.sshd
fi
它确实正常工作,并且ssh服务器在启动后自动启动,因为
下面是在我的系统上安装的许多映像的列表。我不知道为什么会有这么多。为什么自动催促论不能解决这个烂摊子?请告诉我为什么会发生这种事。我是否在不知情的情况下安装或启用了某些设置?谢谢。
ii linux-image-5.11.0-25-generic 5.11.0-25.27~20.04.1 amd64 Signed kernel image generic
ii linux-image-5.11.0-27-generic 5.11.0-27.29~20.04.1
我在安装由netflix nebula创建的rpm时遇到以下错误:
yum localinstall demo-daemon-0:0.0.1-1.noarch
事务检查错误:
file /etc/rc.d from install of demo-daemon-0:0.0.1-1.noarch conflicts with file from package chkconfig-1.7.2-1.el7.x86_64
file /etc/rc.d/init.d from install of demo-daemon-0:0.0.1-1.noarch conflicts with file fro
在Slackware 10.1中,在引导期间rc.S和rc.M之间会发生什么?尝试在此框上引导内核3.x (尝试3.4和3.10),它在rc.S完成执行后立即挂起。2.6内核启动良好。
rc.M无法运行,因为控制台上从未显示“将要多用户”。
#!/bin/sh
#
# rc.M This file is executed by init(8) when the system is being
# initialized for one of the "multi user" run levels (i.e.
#
每次我尝试用sudo apt升级来升级软件包时,我都会遇到以下错误:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: The package linux-modules-5.19.0-32-generic needs to be reinstalled, but I can't find an archive for it.
Gnome软件不能运行。如果我尝试,我在系统托盘中得到一个带白线的红色圆圈,并带有错误消息:
📷
我一直在试图通
我正在安装一个LTSP服务器,一切都正常,可以找到pxe.linux.0,但是客户端被困在这个错误上:
Modprobe: module overlayfs not found in modules.dep
Error: socket failed: connection refused
Exiting.
update-rc.d error cannot find a LSB script for lightdm
update-rc.d error no runlevel symlinks to modify, aborting!
Syncronising state for gdm3.se
我在Debian 8上的sudo遇到了一个很奇怪的问题,用户不能在/etc/sudoers.d中执行一些命令。我使用厨师分发配置,所以所有的文件都是自动生成的。
示例:
这个配置工作得很好
root@server:~# cat /etc/sudoers.d/nginx
# This file is managed by Chef.
# Do NOT modify this file directly.
user ALL=(root) NOPASSWD:/usr/sbin/nginx
但这是失败的:
root@server:~# cat /etc/sudoers.d/update-rc.d
我可以手动运行我的/etc/rc.local文件,它在启动时运行(将字符串回显到文件中),但由于某些原因,永久(npm包)失败。如果有帮助的话,我正在EC2实例上运行Amazon Linux AMI。
我可以在哪里了解它失败的原因,或者你能告诉我我做错了什么吗?
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the ful
我有一个用Qt,C++创建的嵌入式控制台应用程序。我使用纳米粒子火焰(FriendlyARM)作为我的设备与Linux。我连接它的gpio作为继电器,以打开和关闭我的房间的灯。我还编写了移动应用程序,将设备与套接字连接起来。当我在putty ./SmartKeyC上运行我的程序时,它会运行,我可以用我的移动应用程序按钮切换灯,它们都很好。
但是当我启动我的程序以便自动运行时,所有的函数都会在2-3秒的时间内完成它们的任务。
我使用这个创建自动运行应用程序。这是我的剧本:
#! /bin/sh
### BEGIN INIT INFO
# Provides: <your s
我试图清除roundup,aptitude输出了以下错误行:
update-rc.d: /etc/init.d/roundup exists during rc.d purge (use -f to force)
dpkg: error processing roundup (--purge):
subprocess installed post-removal script returned error exit status 1
Processing triggers for ureadahead ...
No apport report written because MaxRepor
以下代码来自我正在编写的python脚本,该脚本用于修改Arch Linux rc.conf文件中的守护进程数组。然而,在运行时,我得到了一个ValueError,说明该操作:
for line in rc:
不能在已关闭的文件上执行。我可能遗漏了一些东西,但据我所知,这个文件并没有关闭。谢谢。
rc = open('/etc/rc.conf', 'r')
tmp = open('/etc/rctmp', 'w')
for line in rc:
if 'DAEMONS' in line and '
我为这个问题找了很多答案。我发现的大多数答案都包括使用rc.local文件禁用相应设备的命令。我尝试过这种方法,但不幸的是,它不起作用。在每一家初创公司,我都有蓝牙和背光。
这是我的/etc/rc.local文件的当前状态:
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#