嗨,伙计们,我正在使用教程来构建鬼脚本-9.19,以便能够在我的安卓应用程序中将eps文档转换为pdf。它在配置时失败。这是原木
checking whether to enable maintainer-specific portions of Makefiles...
no
checking for gcc... arm-linux-androideabi-gcc --
sysroot=/<path>/android-ndk-
r11c/platforms/android-17/arch-arm/
checking whether the C compiler work
我用sshfs将目标设备(Beaglebone,手臂弓)根安装到主机上的一个文件夹中,并试图使用GCC的--sysroot选项进行交叉编译。
但是存在一个问题--一些包含头文件位于目标设备上,不仅位于/usr/include文件夹,而且位于其子文件夹arm-linux-gnueabihf中。同样,也有/usr/lib/arm gnueabihf文件夹。
"Hello“示例无法编译
[gmixaz:/work] $ $CC --sysroot=/work/sysroot h.c
In file included from /work/sysroot/usr/include/stdio.h
我正在尝试使用uClibc和openwrt工具链为ARM设备构建Snort2.9.9.0。
我经常有汇编问题,包括:
·libtool attempting to link library **/usr/lib/libdnet** rather than $TOOLCHAIN_DIR/usr/lib/libdnet
我怀疑我的问题来自于自动工具,因为所有必需的库都已经就绪,我的配置脚本在修改后运行,以防止交叉编译错误(“不能在交叉编译时进行配置”)。
我的问题是:
在此snort交叉编译上下文中使用自动工具进行交叉编译的正确方法是什么?
配置脚本试图执行已编译的程序并引发交叉编译错误,
我从英特尔网站下载了MPSS软件栈版本3.5.2源代码。我正在尝试从源代码编译xeon端口GCC (移植自GCC 4.7.0),并将其安装在本地子目录中。但是,我得到了以下错误-
k1om-mpss-linux-gcc -dumpspecs > tmp-specs
/bin/sh: k1om-mpss-linux-gcc: command not found
我的配置如下-
# The below directory contains the cross compiled libs
# like assembler and linker
export PATH=$HOME/xeon-ph
我正试图在我的ARM64 Ubuntu上为AMD64平台构建一个debian包。我执行命令
debuild -us -uc --host-arch arm64
但要得到警告
dpkg-architecture: warning: specified GNU system type aarch64-linux-gnu does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
因此想知道如何设置CC环境变量,正如警告所建议的那样。对于我的目标操作系统,我通常会使用
/o
我正在使用我的工具链来编译gst-plugins--这对ARM不好。我编译了构建它所需的一切,包括gstreamer、libmms等。并将与pkg-config相关的头文件、库和文件放在我的sysroot中。
当我配置时,一切似乎都没问题,但尝试编译结果如下:
luca@luca-work-laptop:~/gstreamer/gst-plugins-bad-0.10.21$ make
make all-recursive
make[1]: Entering directory `/home/luca/gstreamer/gst-plugins-bad-0.10.21'
Making
root@OpenWrt:~/poco-1.8.1-all# ./configure --no-tests --no-samples --omit=CppUnit,Data,MongoDB,PageCompiler,Redis,Zip
root@OpenWrt:~/poco-1.8.1-all# make
In file included from include/Poco/Crypto/CipherKeyImpl.h:22:0,
from include/Poco/Crypto/CipherKey.h:22,
from sr
我知道这个问题很模糊,但我不太知道如何表达我在这里面临的问题:我正在尝试交叉编译来自的Prolog实现(特别是SWI)。他们使用GNU工具(我是一个完全的初学者)来构建源代码,所以我想我可以设置--host和--build三胞胎来允许ARM交叉编译,但是它没有工作。这是我发布的命令:
$ ./configure --build=i686-pc-linux-gnu --host=arm-linux-gnueabi
(... lots of checks ...)
checking for clock_gettime in -lrt... yes
checking for clock_gett
使用一个Ubuntu12.04主机,我在这里仔细地遵循了这个“所以答案”(),在一棵树中构建GCC和binutils及其所有的依赖项。
下面是我在构建目录中所做的配置行:
../gcc-4.9.0/configure --target=arm-linux-gnueabi --prefix=/home/mint/cross-arm --disable-werror
Makefile正确地配置,然后我运行:
sudo make -j8
我在编译过程中进行了一段时间,然后最终在这里出错:
In file included from ../../../gcc-4.9.0/lib
我一直试图在ARM Cortex A8 (Linux)上交叉编译Squid3.5.7。
我从http://www.squid-cache.org/Versions/v3/3.5/下载的
我有arm-linux-gnueabi-gcc和arm-linux-gnueabi-g++。
tar -zxvf squid-3.5.7.tar.gz
cd squid-3.5.7
./configure --prefix=/usr/local/squid
在./配置-前缀=/usr/local/squid之后,我有一个Makefile:http://wklej.se/makefile
make all
m
我正在使用来自的交叉编译环境,并且已经成功地使用它编译了其他几个库(libsndfile、alsa、fftw),但是当我试图编译port音频时,它拒绝链接到正确的目录。下面是我遇到的错误:
if test -n " bindings/cpp" ; then for dir in " bindings/cpp"; do make -C $dir all; done ; fi
make[1]: Entering directory '/home/theslat/Downloads/portaudio/bindings/cpp'
Making all
我尝试交叉编译zlib for arm-poky-linux-gnueabi,但在启动make时出现错误: ...:~/zlib-1.2.11$ AR=$HOST-ar CC=$HOST-gcc RANLIB=$HOST-ranlib ./configure --prefix=$HOME/zlibARM
Checking for shared library support...
Building shared library libz.so.1.2.11 with arm-poky-linux-gnueabi-gcc.
Checking for size_t... Yes.
Che
你好,我试图交叉编译系统的arm,但我被困在‘坐骑’交叉依赖。
我成功地从util交叉编译了libmount,但是不知道把它放在哪里,或者如何指定介子应该在哪里查找它。
有一个“挂载路径”选项,但即使提供它,它仍然说:
Meson encountered an error in file meson.build, line 797, column 0:
Cross dependency 'mount' not found
我的交叉编译文件如下所示:
[binaries]
当交叉编译时,我得到:
checking whether the /home/ekhnshr/epb2/jenkbuild/toolchain/bin/powerpc-linux-gnu-g++ linker (/home/ekhnshr/epb2/jenkbuild/toolchain/bin/powerpc-linux-gnu-ld) supports shared libraries... no
checking dynamic linker characteristics... no
checking how to hardcode library paths into program