我刚在惠普250 G3上从14.40升级到16.04。一切正常工作,直到我按下f12按钮,这是用于切换无线上网在这台机器上。它不再打开了。有什么问题吗?
我对rfkill unblock all进行了尝试,就像在这个线程https://ubuntuforums.org/showthread.php?t=1768398中一样,但是现在它还没有在wifi图标下准备好编写的设备。
rfkill list all:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lsmod | grep -e wmi -e
有人能帮我理解linux中的ip规则/路由策略吗?
例如,考虑下面的示例,
101:from all to 192.168.0.51 lookup table_custom
190:from all to 10.2.3.4 lookup eth1
我理解优先级"101“的规则--从任何ip地址到192.168.0.51,查找路由的表"table_custom”。
--但我不明白"190“规则--查找接口意味着什么?
提前谢谢。
我有一个内核3.2.023-泛型的Linux机器,它在RPDB中有一个优先级为220的规则,它指向名为“220”的路由表:
T42:~# ip rule show
0: from all lookup local
220: from all lookup 220
220: from all lookup 220
32766: from all lookup main
32767: from all lookup default
T42:~# ip route show table 220
T42:~#
有可能看出这条规则是从哪里来的吗?空路由表的意义是什么
我以为我终于找到了解决我的问题的办法,因为我不够聪明,不足以删除“清理旧内核”所不需要的内核/标题,这多亏了byobu。它对内核非常有用(谢天谢地,因为这是它的名字),但是对于头包来说,它工作得不太好。它似乎只删除了通用包,根本不触及基本包。
示例:
# dpkg -l | grep linux-header
ii linux-headers-4.4.0-101 4.4.0-101.124 all Header files related to Linux kernel version 4.4.0
我试着创造两条路线--
Send all packets with IP protocol version 100 to 1.1.1.1 (via device eth1)
Send all other IP packets to 2.2.2.2 (via device eth2)
回顾ip路由和ip规则的手册页,我似乎应该能够做到这一点,但是我还没有找到正确的语法。
本文有一个如何设置基于策略的路由的示例,但它基于源IP地址,而不是协议号:http://blog.scottlowe.org/2013/05/29/a-quick-introduction-to-linux-policy-rou
我在航站楼的第一步:
aivinor@mcph:~$ sudo apt-get install ttf-mscorefonts-installer
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
imagemagick-common liblqr-1-0 libmagickcore5 lib
我需要在我的系统(路由器)中禁用IPv6重定向,我得到了以下错误:
sysctl -w net.ipv6.conf.all.send_redirects=0
sysctl: cannot stat /proc/sys/net/ipv6/conf/all/send_redirects: No such file or directory
root@hostname:~$ uname -a
Linux hostname 4.4.0-131-generic #157-Ubuntu SMP Thu Jul 12 15:51:36 UTC 2018 x86_64 x86_64 x86_64 GNU/L
在工作中,我们有两个网络;一个WiFi网络,用于正常的互联网接入;一个内部局域网网络,用于回购等。我最近开始使用Linux,这是痛苦的,必须不断地在电缆和WiFi之间切换。在Windows上,我们通过运行以下命令来解决这个问题(这样我们就可以同时连接到两个网络):
# Add a route for all traffic to any destination starting with 10 (internal traffic):
route add 10.0.0.0 mask 255.0.0.0 10.18.21.129 metric 40 -p
# Move the default ro
我已经打电话给apt-get purge来卸载旧内核。但是在清除过程中发生了一些错误,导致文件夹被留下。它说文件夹不是空的,所以不能删除。要释放磁盘空间,可以手动删除已清除的文件夹吗?
1.1M ./4.15.0-20-generic
60M ./4.15.0-32-generic <-- I've purged this
60M ./4.15.0-30-generic <-- and this
236M ./4.15.0-33-generic <-- this is my current one
我也可以移除其中一些包吗?
un lin
我使用以下命令将Linux盒配置为开关模式:
ip link add name switch type bridge
ifconfig switch 192.168.1.2
ip link set switch up
ip link set swp0 master switch && ip link set swp0 up
ip link set swp1 master switch && ip link set swp1 up
ip link set swp2 master switch && ip link set swp2 up
ip li
我有一个有趣的问题,我想了解更多。
以下是我的规则列表:
# ip rule show
0: from all lookup local
32761: from all to 188.40.122.95 lookup vpn
32762: from all to 178.63.26.145 lookup vpn
32763: from all to 176.9.71.146 lookup vpn
32764: from all to 159.69.66.229 lookup vpn
32765: from 192.168.100.0/28 lookup vpn
32766: fr
什么是正确的http方法用来说离开和加入一个聊天组,目前我正在做,他们当然调用数据库。
chatRoom.route('/')
.get(chat.getChats) // get all group chats
.post(chat.createChat) // create new group chat
.put(chat.joinChat) // add user to chat room members array from db
.patch(chat.leaveChat); // remove user to chat room me
好了,伙计们,这就是我得到的
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
linux-firmware
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 23.1 MB of archives.
Aft
我正在尝试使用apt-get。我运行以下命令
apt-get update
但我知道这个错误
Err http://all.repository.backtrack-linux.org revolution Release.gpg
Could not connect to all.repository.backtrack-linux.org:80
在sudo apt upgrade期间,我得到以下错误。也在sudo apt autoremove --purge上。
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk sp