在linux桌面应用程序的flutter run上获取此错误
Running "flutter pub get" in proj... 5.3s
Launching lib/main.dart on Linux in debug mode...
CMake Error at /usr/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62 (message):
The C++ compiler
"/usr/bin/clang++"
is not able to com
我安装了VMware-Player-16.1.2-17966106.x86_64包。当我在GUI中运行它时,它显示
📷
我使用Arch,并按照Arch安装了所有必需的包。对于这类问题,很多答案都是面向分发的(我尝试过了,但没有成功)。所以请任何有同样问题解决的人,发一个答案。输出,输出
pacman -Q linux
linux 5.12.8.arch1-1
输出,输出
pacman -S linux-headers
warning: linux-headers-5.12.9.arch1-1 is up to date -- reinstalling
resolving depende
我正在使用CMake的来找到glib-2.0并正确地设置标志:
cmake_minimum_required(VERSION 2.10 FATAL_ERROR)
project(foo)
find_package(PkgConfig REQUIRED)
pkg_check_modules(GLIB REQUIRED glib-2.0)
# print everything which could be defined, as per FindPkgConfig documentation
message(WARNING "GLIB_LIBRARIES:" ${GLIB_LIBR
我想使用Graphics.UI.Gtk.OpenGL
我有:
OS X 10.11
阴谋版本1.22.0.0
已安装gtk
我所犯的错误:
Could not find module ‘Graphics.UI.Gtk.OpenGL’
Perhaps you meant
Graphics.UI.Gtk.Gdk.GC (from gtk-0.14.2)
Graphics.UI.Gtk.Cairo (from gtk-0.14.2)
Graphics.UI.Gtk.Gdk.Gdk (from gtk-0.14.2)
Use -v to see a
我使用GTK来显示图像,这个项目在amd64上运行得很好,但是当我试图交叉编译它为arm (RaspberryPi)时,它给了我以下错误。请建议如何交叉编译go-gtk从amd64到arm (Raspberrypi3).
编译器输出如下
github.com/mattn/go-gtk/glib
# github.com/mattn/go-gtk/glib
In file included from /usr/lib/x86_64-linux-gnu/glib-2.0/include/glibconfig.h:9:0,
from /usr/include
我对Cmake的工作原理有一个相当新手的理解。我有一个项目,其中包括一个静态库,而静态库又依赖于glib。我遗漏了一些导致大量undefined references to glib features的东西,如下所示。我在Linux Ubuntu上工作,让Cmake 3.5 ../Gobbledegook/src/libggk.a(libggk_a-Gobbledegook.o): In function `ggkWait':
/home/ubuntu/visionpro-device-xray/src/user_device_interface/Gobbledegook/src/G
我正在尝试在64位的wxWidgets机器上为32位的Linux3.1编译static Linux3.1库。
我的配置如下:
../configure "CFLAGS=-m32" "CXXFLAGS=-m32" "LDFLAGS=-m32" --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-shared --enable-unicode
make
这个库开始构建,但在构建到一半时,我得到了这个错误:
In file included from /usr/lib64/gli
我试图在Ubuntu18.04.3上构建应用程序,当我使用meson build时,出现了以下错误
Dependency glib-2.0 found: NO found 2.56.4 but need: '>= 2.58.0'
然后我通过sudo apt-get install glib-2.0升级了glib-2.0控制台
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libspice
我正在尝试为arm交叉编译和构建gst-rtsp-server
我已经运行过meson build,但它总是返回
Found CMake: NO
Run-time dependency glib-2.0 found: NO (tried pkgconfig and cmake)
Looking for a fallback subproject for the dependency glib-2.0
meson.build:136:0: ERROR: Neither a subproject directory nor a glib.wrap file was found
.But我已经在介
我试图构建达舍尔,但我知道它需要glib。于是,这件事就出现了:
Checking for GLIB... configure: error: Package requirements (glib-2.0>= 2.6) were not met:
No package 'glib-2.0' found
所以我试着安装libglib2.0-dev
它给出了另一个错误:
libglib2.0-dev:
Depends: libglib2.0-0 (=2.26.0-0ubuntu1) but 2.26.1-0ubuntu1 is to be installed
Depe
我目前正在收到一个导入错误,它似乎发生在python中的请求模块上。这是我在RPi上遇到的错误
Traceback (most recent call last):
File "pathfinderAllocator.py", line 4, in <module>
import requests
File "/usr/local/lib/python2.7/dist-packages/requests-2.7.0-py2.7.egg/requests/__init__.py", line 58, in <module>
所以我试着通过pip为python安装一个蓝牙包。我发现在下载和安装时,gattlib包安装错误。正在发布下面的日志。任何形式的帮助都是非常感谢的。 Pip版本:/usr/local/lib/python3.5/dist-package/ pip (python 3.5)中的pip 20.0.2 Defaulting to user installation because normal site-packages is not writeable
Requirement already satisfied: pybluez[ble] in ./.local/lib/python3.5/si
操作系统: Red Hat Enterprise Linux Server release 5.5 (Tikanga)
正在尝试运行此命令以安装meteor:
curl install.meteor.com | /bin/sh
============= Output Error ===============
Installing /tmp/meteor-install-Nv47529/meteor-0.3.6-1.x86_64.rpm
error: Failed dependencies:
libc.so.6(GLIBC_2.6)(64bit) is needed by m
在Linux Mint下,尝试make gnome-vfs-2.0.4,但我得到了错误消息:
/glib-2.0/glib/gtypes.h:31:2: error: #error "Only glib.h can be included directly."
glib-2.0/glib/gmacros.h:35:2: error: #error "Only glib.h can be included directly."
glib-2.0/glib/gversionmacros.h:31:2: error: #error "Only glib.h
我试图把我的联想T500笔记本电脑从Kubuntu12.04LTS升级到Kubuntu14.04LTS。
启动了升级过程,最后在下载了大量的软件包之后,升级开始了,结果却陷入了困境。
它被困了好几个小时了:
Installing the upgrades->Unpacking subversion
最后一行错误消息:
GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.32.4/./gobject/gtype.c:2722: You forgot to call g_type_init() at /usr/lib/perl/5.18/Dy
我不知道这个问题是否得到了答复,因为我对这个问题并不十分确定。在白天,我至少有一次(有时更多)收到Ubuntu崩溃的通知。信息显示它与chrome-gnome-shell有关(我已经重新安装了chrome-gnome-shell)。我也无法在:上列出我的本地Gnome扩展。使用火狐中的browser console,当我打开该页面时,会得到以下内容:
Unchecked lastError value: Error: Could not establish connection. Receiving end does not exist. ExtensionCommon.jsm:265
st
我想安装perl Gtk2,为此我需要先安装Glib。我尝试过sudo cpanm Glib,但在编译时遇到错误(我还尝试下载.tar.gz源代码等,也有同样的效果)。我还尝试了一个旧版本的Glib。我使用的是OSX10.11 (El Capitan)。下面是错误:
error: '_GStaticAssertCompileTimeAssertion_0' declared as an array with a negative size
我不知道如何修复它…如果有人能为我做点什么,非常感谢!(顺便说一句,brew install glib运行得很好,但似乎我正在尝试构建和运行
尝试在Arch linux上安装flatpak失败: $ sudo pacman -S flatpak
resolving dependencies...
:: There are 3 providers available for xdg-desktop-portal-impl:
:: Repository extra
1) xdg-desktop-portal-gtk 2) xdg-desktop-portal-kde
:: Repository community
3) xdg-desktop-portal-wlr
Enter a number (default=1):
当我尝试构建我的包时,我得到了一个关于Glib的奇怪的问题:
/usr/bin/ld: main_window.o: undefined reference to symbol 'ceilf@@GLIBC_2.2.5'
/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/libm.so: error adding symbols: DSO missing from command line
我在所需的构建包中添加了Glib,并添加了一些包含Glib包的PPA。我似乎不能让这个错误消失。有什么想法吗?