我从这里下载了Linux64位.run,我运行的是64位CentOS:
我听从了chmod u+x [filename.run]的指示
我在./QtSdk....上运行它
我得到了这些错误(如下所示)。我试着找到这些库,并用“yum.‘”安装它们。百胜告诉我所有这些包都是最新的。我做错了什么?
./QtSdk-offline-linux-x86_64-v1.2.1.run
./QtSdk-offline-linux-x86_64-v1.2.1.run: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (requi
我有一个Debian (4.0)系统,目前仍然运行内核2.4.27-2-386。我想把它升级到Lenny,但是我遇到了内核和libc6之间的循环依赖。
简单的升级(update sources.list、apt-get update、apt-升级)在试图升级libc6时失败:
WARNING: POSIX threads library NPTL requires kernel version
2.6.8 or later. If you use a kernel 2.4, please upgrade it
before installing glibc.
The installation
我试图用特定的模块运行redis服务器(在CentOS服务器上):
redis-server --loadmodule ./redisql_v0.9.1_x86_64.so
并得到错误:
Module ./redisql_v0.9.1_x86_64.so failed to load: /lib64/libc.so.6: version `GLIBC_2.18' not found (required by ./redisql_v0.9.1_x86_64.so)
这是linux版本:
uname
Linux
cat /etc/*release
CentOS Linux release
我一直在犯这个错误:
./binary: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by ./binary)
我试过这里的说明:
https://superuser.com/questions/537683/how-to-fix-lib-x86-64-linux-gnu-libc-so-6-version-glibc-2-14-not-found
但是当我运行sudo apt-get -t experimental install libc6时,它说最新的版本已经安装好了,尽管它显
当我运行sudo apt-get upgrade时:
libc6-i386:dependency: libc6 (= 2.17-93) but 2.17-92+b1 have been installed;
因此,dpkg给出了一个错误,所有的更新都不能继续。
如果我尝试sudo apt-get -f install:
A copy of the C library was found in an unexpected directory:
'/lib/x86_64-linux-gnu/libc-2.17.so'
It is not safe to upgrade the C
我过去经常运行Debian测试,我已经有两年没有升级或升级了。昨天我犯了个错误尝试.它没有工作(我不记得确切的错误信息),所以我尝试挤压代替。
嗯,软件包被下载并开始安装,但是后来我开始了libc6配置。我通过了关于重新启动服务的菜单,然后得到:
WARNING: this version of the GNU libc requires kernel version
2.6.18 or later. Please upgrade your kernel before installing
glibc.
The installation of a 2.6 kernel _could_ ask
我正在阅读Linux从头开始的书,这时我在配置Glibc时遇到错误(步骤5.7):
checking for sysdeps preconfigure fragments... aarch64 alpha arm configure: error: Old ABI no longer supported
我正在使用:
../glibc-2.20/configure \
--prefix=/tools \
--host=$LFS_TGT
<#>更新
每当我试图升级或安装任何软件包no时,都会出现以下错误
libc6-dbg : Depends: libc6 (= 2.31-0ubuntu9.1) but 2.31-0ubuntu9 is to be installed
libc6-dev : Depends: libc6 (= 2.31-0ubuntu9.1) but 2.31-0ubuntu9 is to be installed
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify
在我的Debian上运行rstudio时,我得到了以下错误:
rstudio: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by rstudio)
我已经卸载和重新安装了很多次R和Rstudio,但是只运行了R,而没有运行Rstudio。我还按照其他帖子中的提议升级了lib6和lib6-dev。
编辑:我使用的是Rstudio的最新版本,因此我认为没有其他版本使用最新版本(GLIBC_2.14除外)--dpkg -l | grep -P '(-| )libc-'的输出
我正在尝试在Linux上安装Qt5,但是我得到了这个错误:
[root@localhost Desktop]# ./qt-linux-opensource-1.4.0-x86-online.run
./qt-linux-opensource-1.4.0-x86-online.run: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by ./qt-linux-opensource-1.4.0-x86-online.run)
./qt-linux-opensource-1.4.0-x86-onli
将Ubuntu从16.04升级到16.10之后,每当我尝试执行与postgis相关的操作时,都会收到此错误:
could not load library "/usr/lib/postgresql/9.5/lib/postgis-2.2.so": libboost_thread.so.1.58.0: cannot open shared object file: No such file or directory
我没有libboost_thread.so.1.58.0,但libboost_thread.so.1.61.0在/usr/lib/x86_64-linux-gnu/。
目前运行Debian (5.0.9)。我添加了以下测试repos来安装特定的包;
deb http://ftp.debian.org/debian/ testing main contrib
deb-src http://ftp.debian.org/debian/ testing main contrib
然而,现在当我去安装另一个软件包(libc6-dev)时,结果是这样的;
The following packages are BROKEN:
libc6-dev
The following NEW packages will be installed:
binutils{a}
昨天我把一个11.10盒升级到12.04。今天上午,我尝试运行apt-get升级程序,并遇到以下情况:
sudo apt-get upgrade
[sudo] password for brian:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
linux-generic linux-headers-generic linux-image-generic
T
我想在我的ubuntu服务器14.04LTS上安装一个ARK服务器,我想我完全搞砸了我的系统。
我做的是这。
nano /etc/apt/sources.list
并将其添加到文件中。
# Experimental/unstable (sid) repositories
deb http://ftp.debian.org/debian experimental main
deb http://ftp.debian.org/debian sid main
然后:
apt-get update
apt-get install libc6-dev
但现在我已经失去了依赖。我试过所有标准的东西。
ap
(ubuntu8.0.4+eclipse3.6.1+ADT8.0.1)我把安卓从(1.5+1.6+2.1+2.2)升级到了2.3,但我得到了
1:/home/workaccount/Android/android-sdk-linux_86//tools/emulator: /lib/tls/i686/cmov/libc.so.6:找不到版本GLIBC_2.8' not found (required by /home/workaccount/Android/android-sdk-linux_86//tools/emulator) 2:/home/workaccount/Android
在Debian9.12扩展中,我有下面的libc6依赖问题。
sudo apt安装libc6-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some requ
我使用16.04.2,并使用以下方法对内核和xorg进行了hwe升级(4.8):
sudo apt-get install --install-recommends linux-image-generic-hwe-16.04 xserver-xorg-hwe-16.04
我已经尽我所能地清理了之前的内核,但是我仍然看到了以下几点:
ii linux-libc-dev:amd64 4.4.0-64.85 amd64 Linux Kernel Headers for d
我正在尝试在CentOS7上构建webrtc。我能够安装所有webrtc所需的依赖项,但我遇到了一个问题,gn(生成忍者文件的元构建系统)报告说它找不到GLIBC_2.18。我正在遵循这里的构建说明(),并在上得到这个错误。
错误的堆栈跟踪:
$ gn gen out/debug-x64 "--args=enable_iterator_debugging=false is_component_build=false"
webrtc-checkout/src/buildtools/linux64/gn: /lib64/libc.so.6: version `GLIBC_2.18
我正在尝试使用sudo apt update和sudo apt upgrade更新我的ubuntu包,我得到了以下消息。
Setting up usrmerge (25ubuntu2) ...
Smartmatch is experimental at /usr/lib/usrmerge/convert-usrmerge line 172.
FATAL ERROR:
Both /lib/x86_64-linux-gnu/libc.so.6 and /usr/lib/x86_64-linux-gnu/libc.so.6 exist.
You can try correcting the er
我使用的是64位的crunnchbang linux。我安装了atom文本编辑器,但当我试图启动它时,它给出了错误。输出如下:
shunya@crunchbang:~$ atom
shunya@crunchbang:~$ /usr/share/atom/atom: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by /usr/share/atom/atom)
/usr/share/atom/atom: /lib/x86_64-linux-gnu/libc.so.6: version
我正在为CI使用jenkins,在将构建工具版本更新为25之后,我得到了以下错误:
"processReleaseResources/opt/android-sdk-linux/build-tools/25.0.0/aapt: /lib64/libc.so.6: version `GLIBC_2.14' not found (required by /opt/android-sdk-linux/build-tools/25.0.0/aapt)"
我需要使用buildtools 25,我的服务器centos版本是6.8。如何更新glibc?
我正面临着一个奇怪的问题。我开发了Qt/C++应用程序。直到昨天,我的开发机器和目标机器都在运行Ubuntu20.04。
昨天,为了运行一个特定的软件,我不得不将开发机器升级到21.10。不幸的是,这破坏了我的可执行文件的兼容性:
./MyProject: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by ./MyProject)
./MyProject: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not fo
如何解决依赖关系问题?
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these.
The following packages have unmet dependencies:
gcc-4.4: Depends: gcc-4.4-base (= 4.4.7-1ubuntu2) but 4.4.3-4ubuntu5.1 is ins
当我在python中导入一个模块时,我发现:
ImportError: /lib64/libc.so.6: version `GLIBC_2.14' not found (required by /home/user/tools/root6/lib/libPyROOT.so)
我在/home/user/.linuxbrew/lib64中有一个较新的版本,但如果我使用export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:~/.linuxbrew/lib64,我会得到一个Segmentation fault
有没有办法解决Segmentation fault错误或