在运行Busybox的嵌入式Linux系统上,我试图通过串口接收字节,并回显接收到的所有信息。
系统设置如下: Linux <-USB-> FTDI芯片<- UART ->单片机在UART线上,我有一个逻辑分析器监控FTCI芯片和单片机之间的数据。MCU和Linux都有相同的UART配置。
我编写的脚本运行在Linux系统上,应该将从MCU接收到的所有数据发回。
到目前为止,我有一个简单的Bash脚本,它将接收62字节长的数据突发。超时设置为5秒,作为一种活动信号。
#!/bin/bash
# Enable debugging
set -x
# Set the ba
我有一个码头形象,是建立和上传到亚马逊ECR的x86机器。
我试图在ARM机器上运行这个映像;但是,我得到了以下信息:
$sudo docker run 1b3ed34937e8
WARNING: The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested
standard_init_linux.go:228: exec user process caused:
我试图通过以下命令使用自构建linux内核运行橙-pi仿真:
ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make mrproper
ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make sunxi_defconfig
ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make
以及使用默认orangepi_zero_defconfig使用buildroot生成的系统。试图通过以下命令运行仿真:
qemu-system-arm -M orangepi-pc -nic user -
我按照上的说明操作,但它不起作用。
$ pkg_info | grep linux_base
linux_base-f10-10_4 Base set of packages needed in Linux mode for i386/amd64 (L
$ kldstat | grep linux
5 1 0xffffffff8112d000 1c4ac linux.ko
$ ./wkhtmltoimage-amd64
ELF binary type "3" not known.
./wkhtmltoimage-amd64: Exec format error.
我使用的是EdSim51仿真器(针对8051单片机),遵循。我写了一个发送数据的程序,但有时(并不总是)它会发送垃圾。
JMP main
ORG 23h ; serial interrupt vector
JBC TI,sendString
RETI
ORG 30h
str: DB 'H','e','l','l','o',0Dh,0
sendString:
CLR A
MOVC A,@A+DPTR ; read next char from str
INC DPTR
JZ sendStri
在这里,我试图运行为我的reactnative应用程序安装的android仿真器,以便在蔚蓝linux机器上在线测试vscode,并获得以下错误:
Specify configs in the ini-formatted file:
/home/vsonline/.npmrc
or on the command line via: npm <command> --key value
Config info can be viewed via: npm help config
当我运行npm start-android-emulator时,我会得到错误。请任何帮助。我试图在不
我正尝试在Jenkins服务器上运行模拟器。但是我一直收到这样的错误,Jenkins无法启动模拟器,因为下面的错误直到它超时:
[android] Waiting 10 seconds before starting emulator...
$ /opt/android-sdk-linux/platform-tools/adb start-server
* daemon not running. starting it now on port 9666 *
* daemon started successfully *
$ /opt/android-sdk-linux/platform-t