我试图增加40 GB到60 GB的磁盘,并使它100 GB。磁盘是从后端添加的,在fdisk中显示100 is。但是,当尝试创建新分区时,我会出现“没有可用的空闲扇区”的错误。
在尝试使用fdisk /dev/sda创建分区时,如下所示:
]# fdisk /dev/sda
The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommen
我们正在使用ApacheSpark2.1.1生成一些每日报告。这些报告是从一些日常数据中生成的,我们坚持这些数据,然后分别对每个单元进行报告,并将它们合并在一起。以下是我们所做工作的简化版本:
def unitReport(d: Date, df: DataFrame, u: String): DataFrame = ... // Builds a report based on unit `u`
val date: Date = ... // Date to run the report
val dailyData: DataFrame = someDailyData.persist()
我想将我的磁盘划分为2,一个分区用于UEFI,另一个分区用于Btrfs,我将在其中安装Linux。
我应该使用哪种类型的参考线?Linux有很多可用的,请参阅sfdisk中的列表:
0657FD6D-A4AB-43C4-84E5-0933C84B4F4F Linux swap
0FC63DAF-8483-4772-8E79-3D69D8477DE4 Linux filesystem
3B8F8425-20E0-4F3B-907F-1A25A76F98E8 Linux server data
44479540-F297-41B2-9AF7-D131D5F0458A Linux root
我有3个分区(linux、extended ),我需要将我的活动分区(linux)扩展到这些分区之后可用的空间。
更多信息:
#fdisk /dev/vda
Welcome to fdisk (util-linux 2.29.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/vda: 164 GiB, 176093659136 bytes, 3
最近我的一个驱动器在我的RAID中坏了,我正在用一个新的驱动器替换。我使用这个答案来镜像旧驱动器上的分区以进行重新同步。但我担心的是输出。我的驱动器是4k扇区,我第一次做错什么了吗?
Checking that no-one is using this disk right now ...
OK
Warning: partition 1 does not end at a cylinder boundary
Warning: partition 2 does not start at a cylinder boundary
Warning: partition 2 does not end a
Ubuntu12.10到13.10的升级在启动后立即中止,因为/boot分区只有54 to大小。服务器有两个硬盘,每个硬盘有两个分区,通过RAID1连接。由于服务器位于数据中心,因此无法使用活动系统磁盘启动服务器以使用gparted。通过网络加载的救援系统不能访问硬盘(fdisk -l在那里是空的)。
问题是:我如何使/boot更大,所以最初的RAM磁盘适合(建议:300 so )?
do-release-upgrade显示了这一点:
Not enough free disk space
The upgrade has aborted. The upgrade needs a total o