echo $HOME将只打印/home/user。但是在我的系统中,/home不是在/下挂载的,也不是它自己的分区。
# shared linux data partition, `/home` is here
UUID=a89334f7-59b7-4d04-b89b-a5a30c379644 /mnt/linux_data ext4 defaults 1 2
主目录使用绑定挂载挂载,
# bind mount /home to directory to a directory on /linux_data
/mnt/linux_data/01_centos /home none
我要和一个司机约会。有以下几种说法:
/* Get the interrupt GPIO pin number */
gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN);
我读过关于的文章,但我仍然不知道到底返回了什么?
我知道gpiod_direction_output返回一个struct gpio_desc。但是devm_gpiod_get_optional的情况似乎并非如此,因为我尝试过在每个示例中打印gpiod->label,并且得到了dereferencing pointer to incom
我已经使用Git和repo从android源代码下载了外部文件夹中的libpcap。我使用了ndk (android-ndk-r5b)的工具来编译这个库,步骤如下:
./configure --prefix=path-to-android-src/mydroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin make clean make make install
然后生成一个libpcap.a文件。
我用libpcap (sniffer.c)做了一个简单的嗅探器。当我尝试编译它时,出现了以下错误: agcc sniffer.c libpcap
我正在努力了解Meteor的构建过程,以提高它在我的移植流星应用程序中的性能。我发现,如果我连续运行两次meteor build build --directory --server-only,就会发现第二次运行时不能解析json的错误。
以下是成功的第一次运行:
❯❯❯ meteor build build --directory --server-only
WARNING: The output directory is under your source tree.
Your generated files may get interpreted as source
我是Linux的新手。我最近在Windows10的Ubuntu上下载了Bash (在Windows10周年纪念版更新之后)。由于此更新相对较新,因此没有太多关于故障排除的在线信息。有两件事我需要帮助:
(1)当我转到主文件夹,似乎是"C:\Users\user\AppData\Local\lxss\ home \user“,并通过Windows添加了一个新文件夹时,这个文件夹在Linux中不会使用"ls”命令显示。但是当我在Linux中使用"mkdir“添加一个目录时,"ls”命令显示了这个文件夹。为什么会这样呢?在此文件夹中工作时,是否仅限于通过"mk
我目前正在使用Linux终端,每次我试图保存一个aidl文件时,它都会将其保存为文本文件。
我也尝试过转换文件,但它对aidl扩展名不起作用:
mv IRemoteService IRemoteService.html (成功转换为HTML )
mv IRemoteService IRemoteService.aidl (仍然保存为txt文件)
当我试图用上面的文件(IRemoteService.aidl)构建项目时,我会得到以下错误:
interface IRemoteService should be declared in a file called com/service/IRemot