我需要从向量中删除\"。这是我的数据:
data <- c("\"https://click.linksynergy.com/link?id=RUxZriH*PWc&offerid=323058.1803224&type=2&murl=https%3A%2F%2Fwww.udemy.com%2Flinux-linux-security-masterclass-3-in-1%2F",
"\"https://click.linksynergy.com/link?id=RUxZriH*PWc&offerid=32
刚把我的开发系统从Debian升级到Debian,采用了直接改变sources.list和apt-get升级/dist升级的方法。现在,当我试图登录到xdm时,我看到了失败,以及从apt返回的错误。这是..xsession错误
Xsession: X session started for rosuav at Friday 22 May 02:23:12 AEST 2015
localuser:rosuav being added to access control list
GLib-GIO-Message: Using the 'memory' GSettings bac
你好,我有一个terastation死了(主板烧坏了),它需要4个ide驱动器,而我的计算机只有2个ide端口(好吧,1个端口,我使用的是2个端口的电缆)
我一次将这些驱动器连接到2个驱动器中,并在一个更大的驱动器上创建了一个映像,因此现在我有了这些驱动器的4个dd映像,我已经将每个驱动器挂载为一个环回设备,并使用以下命令绘制了三个分区
kpartx -a -v /mnt/sdb/sda.dd
kpartx -a -v /mnt/sdb/sdb.dd
kpartx -a -v /mnt/sdb/sdc.dd
kpartx -a -v /mnt/sdb/sdd.dd
然后,我尝试使用
根据文件,结构字段解释如下:
struct statfs {
__SWORD_TYPE f_type; /* type of file system (see below) */
__SWORD_TYPE f_bsize; /* optimal transfer block size */
fsblkcnt_t f_blocks; /* total data blocks in file system */
fsblkcnt_t f_bfree; /* free blocks in fs */
fsblkcnt_t f_bavail; /* free blocks available to
u
我在SunOS中以.sh文件的形式运行以下代码
#!/usr/bin/bash
#lerning linux scripting
#
printf "%-5s %-10s %-4s\n" No Name Mark
printf "%-5s %-10s %-4.2f\n" 1 James 80.1234
printf "%-5s %-10s %-4.2f\n" 2 Sarah 99.8923
但是,当我在中运行超过一个错误时,就会出现SunOS错误。
No Name Mark
: arithmetic syntax erro
我目前正在构建一个 R镜像(尽管我不精通R)
我目前正在从用于amd64架构的中提取deb包。
我可以从创建的映像交互地运行R,但是,一些核心库没有正确加载,并且关于终端中失败原因的信息很少。
以下是运行以下命令的输出:R --verbose
'verbose' and 'quietly' are both true; being verbose then ..
now dyn.load("/usr/lib/R/library/methods/libs/methods.so") ...
R version 3.6.2 (2019-12-12)
在这两个for语句中,我都得到了以下错误:
./count_files.sh: line 21: [: too many arguments
./count_files.sh: line 16: [: too many arguments.
有人能帮我吗?
#!/bin/bash
files=($(find /usr/src/linux-headers-3.13.0-34/include/ -type f -name '[aeiou][a-z0-9]*.h'))
count=0
headerfiles=($(find /usr/src/linux-headers-3.
在linux桌面应用程序的flutter run上获取此错误
Running "flutter pub get" in proj... 5.3s
Launching lib/main.dart on Linux in debug mode...
CMake Error at /usr/share/cmake-3.22/Modules/CMakeTestCXXCompiler.cmake:62 (message):
The C++ compiler
"/usr/bin/clang++"
is not able to com
这个代码几乎是完美的,但是第二个编号并不像预期的那样工作。
user@linux:~$ cat ip.txt
10.1.1.1
10.2.2.2
10.3.3.3
user@linux:~$
script.py
from netmiko import Netmiko
with open('ip.txt') as f:
print('List of Hosts')
print('-' * 13)
for x,y in enumerate(f.read().split(), 1):
print(f'
我尝试按照下面的说明从3.2.0.4到3.12.0创建内核。
cd /usr/src/linux
tar -xvjf linux-3.12.tar.bz2
cd /usr/src/linux/linux-3.12
make defconfig
make menuconfig
cd /usr/src/linux/linux-3.12/
make clean
make bzImage
make modules
make modules_install
cp /usr/src/linux/linux-3.12/arch/x86/boot/bzImage /boot/bzImage-neu