不小心被编辑或删除了,我不知道。请有人帮我解决这个问题。我是Ubuntu的新手。
General error mounting filesystem.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and reboot the system
更多信息:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 1606
我有一个挑战,以清洁引导驱动器,是100%满。
我列出以前的版本:
dpkg -l linux-映像*
会得到12个版本的清单,
rc linux-image-4.4.0-45-generic 4.4.0-45.66 amd64 Linux kernel image for version 4.4.0 on 64 bit x86 SMP
rc linux-image-4.4.0-47-generic 4.4.0-47.68 amd64 Linux kernel image for v
我正在构建从/media/src_prog/linux-3.5/到/media/sda5_k/的内核(3.5)。我经历了以下步骤:
make O=/media/sda5_k/ menuconfig
make -j2 O=/media/sda5_k/
make O=/media/sda5_k/ modules_install
谈到make O=/media/sda5_k/ install,我得到的只有:
[root@localhost linux-3.5]# make O=/media/sda5_k/ install
sh /media/src_prog/linux-3.5/arch/x86/b
我使用的是Oracle Linux 7.6,它是一个基于RHEL7.6的发行版。在RHEL7.6或其他基于RHEL7.6的发行版上,以下测试应该是相同的。
我在Windows10上的VMware工作站上运行OracleLinux7.6服务器,我想要做的是在不重新启动Linux服务器的情况下向Linux来宾虚拟机添加一个磁盘。我搜索了一下,发现了这个页面:https://rahsupport.wordpress.com/2017/08/10/vmware-add-disk-to-linux-without-rebooting-the-vm/。基本上,它所做的是:
将磁盘从VMware工作站添加到
我想将一些逻辑分区转换为扩展分区,所以我遵循了这个被接受的答案。但是,在备份当前分区表的步骤中,我错误地输入了下面的内容,而不是编写的内容。
sfdisk -f /dev/sda > /mnt/parts.txt
其结果是:
Disk /dev/sda: 30401 cylinders, 255 heads, 63 sectors/track
Old situation:
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cy
我使用的是ubuntu20.04,我想要创建新的分区磁盘,正好有500 MB。但是,fdisk将其调整为512 can,是否有任何方法可以创建准确的500 it磁盘大小?
📷
ric@Eric:~/Downloads$ sudo fdisk /dev/sda
Welcome to fdisk (util-linux 2.34).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help)
当我试图在/dev/sda5窗口上安装windows xp时,告诉我它不能在/dev/sda1上写入
我怎样才能在/dev/sda5上安装windows而不搞砸一些事情,或者不可能在这个分区上安装windows?
cfdisk (util-linux-ng 2.17.2)
Disk Drive: /dev/sda
Size: 250059350016 bytes, 250.0 GB
Heads: 240
Sectors per Track: 63
Cylinders: 32301
Name Flags Part Type FS Type
所有人。在升级到natty之后,我的系统在第一次尝试时就开始拒绝引导。更多细节:在grub菜单上,我试图启动ubuntu,这会导致错误:
error: file not found
error: you need to load the kernel first
push any key to proceed
然后,grub菜单再次出现。在尝试启动错误信息之后,不会出现错误消息,并且系统会正常启动。每次都是这样。
fdisk -l输出:
/dev/sda1 * 1 10199 81922016+ 7 HPFS/NTFS
/dev/sda2
Grpc版本: 1.24.2
在部署我的Node.js应用程序时,我遇到了二进制文件的问题。
错误:
Error: Failed to load gRPC binary module because it was not installed for the current system
Expected directory: node-v83-linux-x64-musl
Found: [node-v72-linux-x64-musl]
This problem can often be fixed by running "npm rebuild" on the current
我卸载了我的/dev/sda1/ext4分区以更改标签,现在Gparted中的挂载选项是灰色的,我不能使用sudo mount /dev/sda1/ext4,我得到了一个错误:
找不到/dev/sda1/ext4 in /etc/fstab /etc/fstab
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 521973360 521971313 248.9G 83 Linux
/dev/sda4 521973758 976769023 454795266