嗨,我正在写一个小程序,解决一个指定的图形问题。为此,我想使用goraph的maxflow算法(请参阅github.com/gyuho/goraph),但是将其导入到我的项目中有问题。
我所做的:-我在我的主目录中创建了一个.go文件夹,并将GOPATH添加到我的.bash_profile中(导出GOPATH=$ home /. to )
然后我打电话给“Ggetgithub.com/gyuho/goraph”。这些文件存储在~/..go/src/github.com/gyuho/goraph下。在.go中还存在一个"bin“和"pkg”文件夹。
在我的代码中,我执
最近,我打开了一个具有相同标题的线程这里,它建议我清除桑巴并根据这个论坛上发布的一个老问题重新安装它。
当我清除samba时,我认为所有的事情都是固定的,因为我已经不再容易得到错误,但是,当我刚刚意识到我的gnome-control-center正在使用坏掉的SAMBA库时,我意识到问题仍然存在。
~ ❯❯❯ gnome-control-center
gnome-control-center: error while loading shared libraries: libaesni-intel.so.0: cannot open shared object file: No su
在完成Raspberry Pi 4的buildroot配置后,当我尝试运行make时,出现以下错误: mkdir -p /media/adrian/DyskB/buildroot/buildroot/output/build/glibc-2.31-49-g6f3459f9859a7b506c64fa1823769ab631072c6e/build
# Do the configuration
(cd /media/adrian/DyskB/buildroot/buildroot/output/build/glibc-2.31-49-g6f3459f9859a7b506c64fa1823769
column可以在包util-linux和bsdmainutils中使用。这两个包都安装在LinuxMint20.2中。
$ type column
column is /usr/bin/column
column is /bin/column
这两列都指向bsd列工具。如何从util-linux访问该工具?
sudo apt autoremove
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
3 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up initramfs-
我们正在我们的CentOS5.10 x86_64标准服务器b/c上构建AOSP (android-4.4.2_r1),它有很多处理器和ram。在运行make -j32 2> error.log之后不久,构建就停止了。error.log显示以下错误。有人能告诉我们为什么吗?
find: src: No such file or directory
/usr/bin/m4: unrecognized option `--gnu'
Try `/usr/bin/m4 --help' for more information.
/root/android/source/prebui
你好,史塔克弗莱!
我试图在Linux上使用OpenJDK构建OpenJ9,但是当我运行配置脚本时,会得到以下错误:
configure: error: Could not find numa!
通常,它应该只创建配置并让我构建,因为我没有多CPU。
我已经在上搜索了的错误消息,并查找了错误消息,并跟踪了项目Github(和)上的文档。
下面是我使用的命令:
bash configure --with-boot-jdk=/home/USER/bootjdk16
如果需要,以下是完整的输出:
configure: Configuration created at Sun Nov 21 14:0
我正在尝试用autoconf为ARM架构编译一些文件。我正在Ubuntu12.04中编译它们,目标系统是BeagleBoard XM。我运行以下命令:
./configure --host=arm-linux-gnueabi -prefix=${CSTOOL_DIR}/linux_arm_tool
并得到以下结果:
configure: WARNING: if you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will
我试图通过:sudo apt-get install r-base=4.0.2在Ubuntu20.04上安装RVersion4.0.2,但我得到了
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Version '4.0.2' for 'r-base' was not found
尽管是它确实存在。
然后,我尝试按照说明这里来详细说明如何安装最新版本的R:
# update indices
apt update -
你好,我试图交叉编译系统的arm,但我被困在‘坐骑’交叉依赖。
我成功地从util交叉编译了libmount,但是不知道把它放在哪里,或者如何指定介子应该在哪里查找它。
有一个“挂载路径”选项,但即使提供它,它仍然说:
Meson encountered an error in file meson.build, line 797, column 0:
Cross dependency 'mount' not found
我的交叉编译文件如下所示:
[binaries]
当交叉编译时,我得到:
checking whether the /home/ekhnshr/epb2/jenkbuild/toolchain/bin/powerpc-linux-gnu-g++ linker (/home/ekhnshr/epb2/jenkbuild/toolchain/bin/powerpc-linux-gnu-ld) supports shared libraries... no
checking dynamic linker characteristics... no
checking how to hardcode library paths into program
我有一个dockerfile,它成功地安装了wkhtmltopdf v0.12.4,但我需要将它更新到一个较新的版本(0.12.6),因为它似乎与我所做的一些其他升级不兼容。 下面是可以工作的代码(尽管不兼容) FROM php:7.3.31-apache
...
RUN wget https://github.com/wkhtmltopdf/wkhtmltopdf/releases/download/0.12.4/wkhtmltox-0.12.4_linux-generic-amd64.tar.xz --no-check-certificate
RUN tar -xJf wkhtml