作为在rasbian上安装ROS的一部分,我不得不手动安装console-bridge。我遇到了一个问题
cc1plus: error: unrecognized command line option ‘-std=c++11’
据我所知,这是由于一个过时的g++,但当我试图更新它时:
$ sudo apt-get install --only-upgrade g++
Reading package lists... Done
Building dependency tree
Reading state information... Done
g++ is already the
无法在Amazon Linux AMI上安装libatk-bridge-2.0.so.0。给出以下响应
>sudo yum install libatk-bridge-2.0.so.0
Response: Loaded plugins: priorities, update-motd, upgrade-helper
No package libatk-bridge-2.0.so.0 available.
Error: Nothing to do
操作系统: Amazon Linux AMI 2018.03版内核\r在\m上
上下文:我尝试从docker文件创建Linux容器,如下所示: 构建环境: Windows Server 2019 在每个https://sebastiangogola.com/lcow-linux-containers-on-windows/的WS2019上启用LCOW Dockerfile FROM mcr.microsoft.com/dotnet/core/aspnet:3.1-focal
WORKDIR /app
# Copy build
COPY ./bin/ ./bin
COPY ./docker/start.sh ./bin
# This converts line end
OpenVZ设置似乎不允许Linux桥接器:
$ modprobe bridge
FATAL: Could not load /lib/modules/2.6.32-042stab090.5/modules.dep: No such file or directory
The command "modprobe bridge" failed and exited with 1 during .
具体来说,试图使用Libvirt,我得到:
Error while activating network: Call to virNetworkCreate failed: Unable
我想安装sudo apt-get install ros-kinetic-cv-bridge,但有时忽略安装ros-kinetic-opencv3
当使用此命令sudo apt-get install ros-kinetic-cv-bridge时,两者都类似于以下输出:
sudo apt-get install ros-kinetic-cv-bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages we
我想在一个小型linux设备上与一个特殊的IP地址通信,该设备有两个以太网接口,在桥上使用。
这座桥是这样架设的:
# Delete bridge if it exists
ip link delete $BRIDGE_IF type bridge
# Prepare device-facing interface
ip link set dev $DEVICE_IF down
ip address flush dev $DEVICE_IF
ip address add 0.0.0.0 dev $DEVICE_IF
ip link set dev $DEVICE_IF up
# Prepa
Qubes没有看到相机,只看到麦克风。如果我输入lsusb,摄像机是可见的:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 Root Hub
Bus 003 Device 003: ID 1358:c123 Realtek Bluetooth Radio
Bus 003 Device 002: ID 27c6:5110 Shenzhen Goodix Technology Co, Ltd. Goodix fingerprint device
Bus 003 Device 001: ID 1d6b:0002 Linux Founda
在启动时,我的相机被检测到,但是当我尝试再次使用它时,它没有被找到,甚至在lsusb和lspci输出中,相机也没有出现。我在运行Ubuntu 20.4.1
重新启动修复了它。在bios中启用了照相机,我的键盘没有摄像头功能键。
重新启动后:
$ lsusb
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 003: ID 8087:0029 Intel Corp.
Bus 004 Device 002: ID 5986:9106 Acer, Inc Integrated Camera
我对VL805有一些问题。我试图按照这里的建议更新固件,https://askubuntu.com/questions/1162391/usb-3-0-pci-card。
[ 2.407086] usb 3-1.1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[ 2.407087] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.407088] usb 3-1.1: Product: U
我有一个50%的功能设置与惠普雷电3码头(ASMedia ASM1042A)的戴尔XPS 139350笔记本电脑在库班图16.10 (目前升级到4.9内核)。升级为最新版本的BIOS (1.4.13)
显示端口和电源工作没有任何问题。外部音频端口开始工作大约10分钟后,启动。USB端口根本不起作用。这个问题在日志中是可见的- dmesg经常(并且永远)显示:
[ 33.293363] usb 3-1: new high-speed USB device number 67 using xhci_hcd
[ 33.761342] usb 3-1: new high-speed USB d
我正在一个共享服务器上工作,并试图将虚拟env myenv克隆到我的主目录中。
以下是一些事实:
myenv /path to my home directory/my profile/.conda/envs/myenv
root * /opt/conda/4.6.14
我目前没有将包安装到安装区域/opt/conda/4.6.14的权限,因此我试图使用以下命令将myenv克隆到主目录中:
conda create -n myenv_clone -p /path to my home directory/myprofile --clone=/opt/conda/4
我想知道我的网络适配器是否与Ubuntu兼容。
双启动Ubuntu15.04与windows 8.1在惠普馆G6 1d98dx。
我尝试过这么多不同的发行版,但所有发行版的问题都是一样的--“被硬件交换机禁用的无线设备”--我尝试过rfkill unblock all,但这并没有解决问题。
Bus 002 Device 002: ID 04f2:b293 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:
C:\Users\antvai01\Linux\host\tests>python -m pip install pyserial
Defaulting to user installation because normal site-packages is not writeable
Requirement already satisfied: pyserial in c:\users\antvai01\appdata\roaming\python\python37\site-packages (3.5)
C:\Users\antvai01\Linux\host\tests>
我有一个HPPavillienDV6-1149wm,Ubuntu11.04。我有两个USB3.0端口和两个USB2.0端口。如果我长时间使用USB端口埃克斯。用我的适配器,那么特定的USB端口有时他们成双成对会随机决定停止。
在我重新启动之后,一切都恢复了正常,但是总是重新启动是不切实际的。
这里是lsusb 而只有1/4的端口工作。:
matt: ~ $ lsusb
Bus 006 Device 003: ID 0cde:001a Z-Com 802.11bg
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bu