我正在运行make命令来构建从下载的源代码。在运行make时,总是引发相同的错误:
In file included from criu/cgroup.c:29:0:
criu/include/linux/mount.h:8:10: fatal error: linux/mount.h: No such file or directory
#include <linux/mount.h>
^~~~~~~~~~~~~~~
compilation terminated.
我已经多次检查了该文件是否存在于我试图构建的源代码中。但是我不明白为什么编译器找不到它?处理这
我已经格式化了efi分区并再次安装了windows。我有双引导Windows和Linux,然后使用以下命令从一个活动的usb重新安装了grub引导加载程序:
mount /dev/sda* /mnt
mount --bind /dev /mnt/dev
mount --bind /proc /mnt/proc
mount --bind /sys /mnt/sys
mount /dev/sda* /mnt/boot/efi
mount /mnt/hostrun
mount --bind /run /mnt/hostrun
chroot /mnt
grub-install /de
我想使用root帐户重新挂载一个只读文件系统,使其成为可读写文件系统。 查看Linux手册页面,我注意到没有像MS_RDWRITE这样的标志,所以我的问题是,有没有人知道网上有一个例子,演示了使用mount with remount标志来设置一个允许读写的只读路径? 对于运行嵌入式Linux的设备,这将在C++中完成。 /* Here's the declared function for Mount a filesystem. */
extern int mount (__const char *__special_file, __const char *__dir,
我的案例是:我在一个磁盘上安装了两个linux。我首先在/dev/sda1中安装,然后在/dev/sda2中安装,然后运行fisrt系统,并编写脚本在第一个系统运行时对其进行更新。
cd /
mkdir newroot
mount /dev/sda2 /newroot
mount --bind /proc /newroot/proc/
mount --bind /sys /newroot/sys/
mount --bind /dev /newroot/dev/
mount --bind /run /newroot/run/
chr
我安装了Windows10和Windows Subsystem for Linux (在Windows上的Ubuntu上安装了Bash),在Windows上安装了Docker,并且按照演练在linux子系统上运行了Docker客户端。但是,当我希望能够访问我的默认挂载"/mnt/c/../“上的卷时,一切都工作得很好。我在docker启动时使用了挂载标志,并尝试了这两种方法:
docker run -v $PWD:/mount
docker run --mount type=bind,source="$(PWD)",target=/mount
大多数变体都显示为。
我有
我有一个raspberry pi,我正尝试在其上挂载远程samba共享,但我得到的许可被拒绝。在另一个挂载上,使用相同的命令执行相同的共享。
覆盆子派:
root@xbian:~# mount -t cifs //192.168.249.72/root /media/SS -o username=root,password=654321
mount error(13): Permission denied
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
root@xbian:~# uname -a
Linux xbian
我正在尝试使用dcos目录在上部署。
当我安装弹性,卡夫卡和普罗米修斯,它是成功安装,如下图所示。
但是当我安装spark时,它失败了,并且在服务调试中显示的错误是"TASK_FAILED :容器退出状态125“。
日志中的完整错误跟踪是-
WARNING: Your kernel does not support swap limit capabilities or the cgroup is not mounted. Memory limited without swap.
container_linux.go:247: starting con
我正在编写我的第一个shell脚本。我想检查是否挂载了文件系统。如果是,则将我的主驱动器中的文档备份到已挂载的备份。如果没有,请挂载文件系统,然后备份文档。 #!/bin/bash
# Check if linux_backup filesystem is mounted
# Mount filesystem if not mounted already, and then backup documents
docs= "/home/user1/Documents"
mount= "/run/media/user1"
docsbackup= "/ru
我发现自己无法从我的wd中获得linux 19。
我可以用最少的问题启动windows、ubuntu、centos、debian、kali linux和linux 18,但是linux 19就是不能启动。
Curent菜单文件:
DEFAULT vesamenu.c32
PROMPT 0
MENU TITLE PXE Boot Menu
MENU INCLUDE pxelinux.cfg/graphics.conf
## Local Boot ##
LABEL local
menu label ^Boot Normally
localboot -1
Type 0x8
我刚刚编译了Linux Kernel 2.6.27.62,并在VitualBox的Ubuntu中安装了它。现在,当我从grub (遗留)菜单中选择新内核时,会出现以下内容:
[ 13.084002] cpufreq: No nForce2 chipset.
mount: mounting non on /dev/failed: No such device.
W: devtmpfs not available, falling back to tmpfs for /dev.
mount: mounting /dev/disk/by-uuid/7251a301-d971-4d8e-8077-c0
我正在尝试创建一个最小的linux发行版,使用教程“在1小时内构建一个只有Busybox的最小Linux”“编写自己的操作系统”
[ 0.187524] Run /init as init process
[ 0.187624] Failed to execute /init (error -2)
[ 0.187674] Run /sbin/init as init process
[ 0.187707] Run /etc/init as init process
[ 0.187753] Run /bin/init as init process
[ 0.1
我有一个远程服务器(没有对它的物理访问),需要在本地克隆。因此,我将一个辅助HD附加到本地linux服务器上,创建了分区--引导、交换和根目录,并对来自远程服务器的所有数据进行了rsync。复制进行得很顺利,但是当我试图激活grub时,新的驱动器是可引导的,这就是所发生的事情(远程服务器有LVM分区,而我刚刚创建的本地驱动器上通常是引导、交换和根目录):
我以这样的方式挂载复制的图像:
mount /dev/sdb3 /mount && mount /dev/sdb1 /mount/boot/
mount --bind /dev /mount/dev && m
我只是想知道为什么我的davfs2挂载不再工作了:
root:/media# mount -t davfs https://XXX /media
modprobe: ERROR: could not insert 'fuse': Unknown symbol in module, or unknown parameter (see dmesg)
/sbin/mount.davfs: loading kernel module fuse failed
/sbin/mount.davfs: waiting for /dev/fuse to be created
/sbin/moun