我需要从一个连续的数据流(实际上是管道)中逐行读取,并且我需要在第一行之后退出。就在第一排之后。听起来很容易,但是,使用"head -n 1",我注意到我实际上需要在head退出之前输入第二行。
测试用例:
[s@svr1 ~]$ cat | head -n 1
123 <- I type this first (followed by enter, of course)
123 <- I get this output from head, but the command does no exit
456 <- Then I nee
我的Linux版本Linux版本2.6.18-164.2.1.el5PAE
也许有些人有脚本(ksh、perl或bash等),可以从Linux系统获取所有信息并显示出来。
例如
cards in the linux machine (type , manufacture , SN etc..)
cpu
memory
disks
devices ....
为什么$(uname -a)返回的内核与docker容器中的主机内核相同?
uname -a
#=> Linux leo 3.13.0-55-generic #94-Ubuntu SMP Thu Jun 18 00:27:10 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
docker run -ti --rm ubuntu:vivid-20150611 uname -a
#=> Linux 147c3aff216b 3.13.0-55-generic #94-Ubuntu SMP Thu Jun 18 00:27:10 UTC 2015 x86
我配置了Monit (5.27.1版),在重新加载monit之后,我收到了一封“空”邮件。我找了好几个小时,我找不着路.似乎“环境变量”仍然是空的。但为什么?(所有个人资料均属虚假)
我将/etc/monit/monitrc配置为:
cat > /etc/monit/monitrc << EOF
set daemon 120
with start delay 240
set logfile /var/log/monit.log
set pidfile /var/run/monit.pid
set eventqueue
basedir /var/lib/monit/ev