我在使用minGW的g++.exe编译一些Linux C++代码时遇到了相当大的困难。具体地说,它无法理解以下代码:
struct timespec now;
clock_gettime(CLOCK_REALTIME,&now);
我已经添加了必要的头文件
#include <ctime>
编译错误为:
error: aggregate 'special_time2()::timespec now' has incomplete type and cannot be defined
error: 'CLOCK_REALTIME' w
Linux perf tools (不久前命名为perf_events)有几个内置的通用软件事件。其中最基本的两个是:task-clock和cpu_clock (内部称为PERF_COUNT_SW_CPU_CLOCK和PERF_COUNT_SW_TASK_CLOCK)。但它们的错误之处在于缺乏描述。
user 有简短的描述:
PERF_COUNT_SW_CPU_CLOCK
This reports the CPU clock, a high-resolution per-
CPU timer.
PERF_COUNT_SW_TASK_
从昨天起,我的钟显示的时间不对。
比当地时间晚了两个小时。(这个错误的时间是UTC,不知道这是不是巧合)。
我确实有一个带有windows的双引导,但我不认为这是问题所在,因为在我的配置文件/etc/default/rcS中,UTC的条目已经设置为no。
有人有主意吗?
hwclock from util-linux 2.20.1
Using /dev interface to clock.
Last drift adjustment done at 1396258906 seconds after 1969
Last calibration done at 1396258906 second
根据Ubuntu下的Linux手册页
CLOCK_MONOTONIC
Clock that cannot be set and represents monotonic time since
some unspecified starting point.
CLOCK_MONOTONIC_RAW (since Linux 2.6.28; Linux-specific)
Similar to CLOCK_MONOTONIC, but provides access to a raw hard‐
ware-based time that
Linux高分辨率计时器似乎开始在每个线程的范围内计数,而不是应用程序中的全局计数。
我试过使用CLOCK_PROCESS_CPUTIME_ID,但它给了我线程行为吗?
CLOCK\_PROCESS\_CPUTIME\_ID (since Linux 2.6.12) High-resolution per-process timer from the CPU. CLOCK\_THREAD\_CPUTIME\_ID (since Linux 2.6.12) Thread-specific CPU-time clock.
寻找跨越线程的高分辨率
我想知道,这里有什么问题?
这是2.6.38的linux修补程序。我把它改名了。这个补丁是gz.Thus,我正在使用zcat。这就是我看到的?
[joshis1@shreyas linux-2.6-lttng]$ zcat patch-2.6.38.2-lttng-0.248.tar.gz
-p1贴片
can't find file to patch at input line 15
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
------------------
我正在尝试从make文件编译几个C++文件。我一直在犯这个错误:
<i> no member named 'to_time_t' in
'std::__1::chrono::steady_clock'; did you mean
'std::chrono::system_clock::to_time_t'?
time_t tnow = std::chrono::high_resolution_clock::to_time_t(now);
</i>
经过一些研究后,我发现这是因为我没有使用
我刚刚安装了Ubuntu16.04.1取代Windows8.1。但系统时间比实际时间提前5:30。我来自印度,UTC的偏移量是+5:30。通过运行hwclock,我发现我的系统将硬件时钟解释为UTC,而实际上是本地时间。我试着编辑/etc/default文件(按照硬件时钟正在使用UTC时间.)。但是rcS文件不包含UTC条目。文件内容如下所示。我们能做些什么?
时钟的结果--调试:
hwclock from util-linux 2.27.1
Using the /dev interface to the clock.
Last drift adjustment done at 1474290
Linux C++的问题,他们说你不能设置单调时钟。我想设置单调时钟。在Linux的C++中有什么技巧或技巧可以做到这一点吗?我想使用clock_settime(CLOCK_MONOTONC,& ts )并让它将时钟设置为ts中指定的时间,或者使用clock_settime以外的其他方法来完成相同的任务?我对精心设计的hack或变通方法很在行。
我需要将这个C代码移植到Rust中:
QueryPerformanceFrequency((unsigned long long int *) &frequency);
我没有找到这样的函数。
Linux版本如下所示:
struct timespec now;
if (clock_gettime(CLOCK_MONOTONIC, &now) == 0)
frequency = 1000000000;
我应该打电话给std::time::Instant::now()并将频率设置为1000000000吗?
这是一个完整的功能:
// Initializes hi-resol
我创造了一个时间点,但我一直在努力把它打印到终端。
#include <iostream>
#include <chrono>
int main(){
//set time_point to current time
std::chrono::time_point<std::chrono::system_clock,std::chrono::nanoseconds> time_point;
time_point = std::chrono::system_clock::now();
//print the time
我已经下载了PowerPC 64 PowerPC的GO包( machine.When ),运行了go,它引发了以下错误:
./go: line 1:ELF▒9@p@8: not found
./go: line 2: syntax error: unexpected ")"
机器信息如下所示,
uname -a
Linux 0005B9427C4C 3.12.19-rt30 #1 SMP Sun Jul 2 16:21:28 IST 2017 ppc64 GNU/Linux
来自/proc/cpuinfo:处理器:0 cpu : e6500,支持的时钟: 1599.999984
我知道clock()没有给出挂钟时间,而CLOCKS_PER_SEC是系统相关的值。假设我不关心系统依赖的问题,我是否可以假设下面的代码在GNU/Linux和Windows中总是等待1秒,因为我测试过它对我来说似乎还可以。还是应该继续使用依赖于系统的睡眠()/usleep()函数?
void wait_a_sec()
{
clock_t start = clock();
do
{
// wait 1 sec
/**
* Second call to clock() gives the processor time in
我有一个从Linux移植到MacOSX的函数,它利用clock_gettime和CLOCK_THREAD_CPUTIME_ID来测量进程所花费的时间。我在互联网上找到了这段代码,它给了我与CLOCK_REALTIME的等价物:
#ifdef __MACH__ // OS X does not have clock_gettime, use clock_get_time
clock_serv_t cclock;
mach_timespec_t ts;
host_get_clock_service(mach_host_self(), CALENDAR_CLOCK, &