今天,当我试图更新“更新管理器”中的一些包时,我得到了有关cups浏览的错误,然后打开终端并键入这个命令sudo apt-get install -f,输出如下:
Reading package lists... Done Building dependency tree
Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of add
我正在构建一个跨平台打印应用程序,需要在各种Linux上测试它。我可以使用VM,但我有WSL只是坐在这里工作,这将是一个更方便的,至少最初只是使用它。
我安装了杯子,但它不能运行:
$ dpkg -s cups
Package: cups
Status: install ok installed
...
$ sudo systemctl restart cups.service
System has not been booted with systemd as init system (PID 1). Can't operate.
我在‘WSL打印网络’上找到了一个指南,它让它听起来
我为sitara arm linux 6编写了cups 1.7.0
我跟着
./configure --host=arm-linux-gnueabihf --disable-gssapi --prefix=/media/rootfs
make
make install
所有cups相关文件都会自动保存在sd卡中,但在输入cupsd命令时出现错误,而没有启动cups服务器。
cupsd: Child exited on signal 1.
在检查/etc/cups/cupsd.conf时,配置文件中的几条路径是
/media/rootfs/var/run/cups/cups.sock
而不是
我试图让我的打印机(星Tsp-600)在Ubuntu12.04上工作。我发现这一页建议如下:
# get the cups development headers needed to compile the drivers
sudo apt-get install libcups2-dev libcupsimage2-dev
# download and extract the drivers from Star
wget http://www.starmicronics.com/Download/Drivers/starcupsdrv-3.0.0_Linux.zip
unzip starc
我遵循了如何从这个博客安装佳能打印机Pixma G2000的步骤。但是,在终端中运行命令时,我会得到如下错误:
sudo apt-get build-dep cups-common gimp-gutenprint libgutenprint-dev
Reading package lists… Done
Picking ‘cups’ as source package instead of ‘cups-common’
Picking ‘gutenprint’ as source package instead of ‘gimp-gutenprint’
E: Unable to find a s