在编译包含没有open("FILENAME", O_RDONLY);标志的-O2的文件时,一切都很好。但是,当-O2被打开时,我得到:
/usr/include/x86_64-linux-gnu/bits/fcntl2.h: In function ‘open’:
/usr/include/x86_64-linux-gnu/bits/fcntl2.h:44:7: error: invalid use of ‘__builtin_va_arg_pack_len ()’
/usr/include/x86_64-linux-gnu/bits/fcntl2.h:45:26: error
我在设置空气裂缝时遇到了这些错误。
chrisdabeer@localhost:~/aircrack-ng-1.1$ make install
make -C src install
make[1]: Entering directory `/home/chrisdabeer/aircrack-ng-1.1/src'
make -C osdep
make[2]: Entering directory `/home/chrisdabeer/aircrack-ng-1.1/src/osdep'
Building for Linux
make[3]: Entering di
我试图安装一个罗塞威尔RNX-N600UBE无线网卡(拉林克RT2870芯片组)在卡利Linux的驱动程序。我从他们的网站下载了驱动程序并解压缩/解压缩,但是现在当我试图运行'make‘命令时,我会得到这个错误。
/home/fox/System/2011_0427_RT3572_Linux_STA_v2.5.0.0.DPO/os/linux/../../os/linux/rt_linux.c:1156:20: error: incompatible types when assigning to type ‘int’ from type ‘kuid_t’
/home/fox/Syst
我一直试图在Ubuntu14.04上安装大胆的软件,但我似乎无法让它正常工作。
我已经将的软件源代码上的镜像更改为主服务器,但仍然没有安装并且仍然得到错误。
下面是命令和错误:
sudo apt-get install audacious
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impos
我正在运行一个阿尔卑斯linux,并试图安装radare2。我下载了git,然后运行了install.sh脚本。在遇到错误之前,它似乎运行良好:
In file included from p/native/linux/linux_debug.c:6:
/home/nomad/GitRepos/radare2/libr/include/r_debug.h:609:115: note: expected 'r_ptrace_data_t' {aka 'int'} but argument is of type 'void *'
static in
在尝试卸载php7.0时,我得到了以下错误:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'php7.0' is not installed, so not removed
The following packages were automatically installed and are no longer required:
linux-headers-4.4.0-92 linux-headers-4.4.
我正试图在Ubuntu 17.10上安装这个ASUS ac56适配器。我已经从Ubuntu 17.04升级了。Github的驱动程序包以及设备附带的专有驱动程序都无法工作。下面附加了在make过程中遇到的错误。
^~~~~~~~~
cc1: some warnings being treated as errors
scripts/Makefile.build:302: recipe for target '/home/unispirited/DR_USB_AC56_4314_Linux/RTL8812AU_linux_v4.3.13_14061.20150
我下载了iproute2。当我做./configure && make && make install时,我会得到这些错误。
TC schedulers
ATM no
IPT Package xtables was not found in the pkg-config search path.
Perhaps you should add the directory containing `xtables.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xt
如何读取错误?
我在/home/aal/ -file /-file上运行。
/usr/src/linux-2.6$ make O=/home/aal/build/kernel/
我得到了
... cut ...
CC [M] drivers/staging/go7007/s2250-board.o
/usr/src/linux-2.6/drivers/staging/go7007/s2250-board.c:24:26: error: s2250-loader.h: No such file or directory
/usr/src/linux-2.6/drivers/stagin
即使我是以root身份登录的,下面是我在执行升级时遇到的冲突:
root@:/home/frederic# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
3 not fully installed or removed.
After thi
我正在尝试用编译内核版本4.1 (向GRO添加一些特性)。我来自一个硬件背景和相对较新的网络堆栈。我想知道如何解决这个问题,或者至少要知道为什么会发生这个问题。
这就是我所做的
# my temp location
mdkir kern
cd kern
# cloned the juggler and linux 4.1 tree
git clone https://github.com/gengyl08/juggler.git
wget https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.1.tar.gz
tar -xvf linu
我试着遵循这个链接来构建自己的JDK:
重述这些步骤如下:
hg克隆 YourOpenJDK
cd YourOpenJDK
bash ./get_source.sh .get
bash ./配置
使所有
在最后一步中,它显示了如下错误:
*** This OS is not supported: Linux compitition2 4.15.0-32-generic #35-Ubuntu SMP Fri Aug 10 17:58:07 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
/home/jon/Downloads/Open
我已经在Ubuntu-14.0.0中安装了枕头,没有任何虚拟any。但是,当我试图再次在虚拟环境中安装它时,它会失败,并出现以下错误。
Reading https://pypi.python.org/simple/Pillow/
Best match: Pillow 3.0.0
Downloading https://pypi.python.org/packages/source/P/Pillow/Pillow-
i686-linux-gnu-gcc: error: build/temp.linux-i686-2.7/_imaging.o: No such f
由于一些依赖关系问题,我无法运行任何apt操作。
如果我运行sudo apt-get upgrade,就会得到以下内容:
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
gconf-service-backend : Depends: libgconf-2-4 (= 3.2.6-4ubuntu1) but 3.2.6-4.1 is installed
gconf2 : Depends: gcon
我正试图为JamVM !()
我使用以下命令安装了ARM GCC:
sudo apt-get install gcc-arm-linux-gnueabi
接下来我做了:
export CROSS_COMPILE=arm-none-linux-gnueabi-
./configure --host=arm-linux-gnueabi
make
A我收到以下错误:
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is dete
在运行我从D链接网站下载的无线dongle驱动程序的install.sh文件之后,我得到了这些错误,并且不确定如何解决它们。重要的是要注意的是,我没有上网的电脑,这使它更加困难。
cc1: some warnings being treated as errors
scripts/Makefile.build:332: recipe for target '/home/nathan/Desktop/DWA-180_DRIVER_4.3.2_LINUX/RTL8812AU_linux_v4.3.2_11100.20140411/driver/rtl8812AU_linux_v4.3.2_
我正试图在我的桌面上安装一个brostrend1200mbps wifi适配器,并在安装过程中一直遇到问题。我正在尝试安装驱动程序,但它们还没有在ubuntu上可用。在试图编译内核模块时,我会收到以下错误:
root@chris-pc:~# cd rtl8812AU_8821AU_linux
root@chris-pc:~/rtl8812AU_8821AU_linux# make
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/3.13.0-119-generic/build M=/root/rtl8812AU_8821AU_linux m
我在WSL2 ubuntu的机器上编译perf有困难。
Ubuntu是从microsoft商店下载的,内核版本是4.19.128-microsoft-standard。
我已经在堆栈溢出上跟踪了的答案,也注意到了
当运行make时,我得到以下错误:
mv: cannot stat 'util/.env.o.tmp': No such file or directory
make[4]: *** [/mnt/c/Users/micro/Documents/tools/WSL2-Linux-Kernel/tools/build/Makefile.build:97: util/env
我试着安装了endlessm和tomasp尼奥驱动程序,在完成制作后得到了同样的错误:
/home/wjm/Templates/rtl8821ce-git20190810/os_dep/linux/rtw_android.c: In function ‘rtw_android_priv_cmd’:
/home/wjm/Templates/rtl8821ce-git20190810/os_dep/linux/rtw_android.c:665:49: error: macro "access_ok" requires 3 arguments, but only 2 given
我尝试用clang 8.0.0为Linux内核2.6.37代码生成AST文件。我在内核根目录中运行以下命令 clang -emit-ast init/main.c -o astfile -std=c11 -Iinclude -Iarch/x86/include 并获取错误 In file included from /mnt/lfs/sources/linux-2.6.37/init/main.c:12:
/mnt/lfs/sources/linux-2.6.37/include/linux/types.h:13:2: warning: "Attempt to use kernel