出于测试目的,我创建了以下目录。
user@linux:~$ mkdir dir0{1..3}
user@linux:~$ ls -l
total 12K
drwxr-xr-x 2 user user 4.0K Mei 31 10:45 dir01
drwxr-xr-x 2 user user 4.0K Mei 31 10:45 dir02
drwxr-xr-x 2 user user 4.0K Mei 31 10:45 dir03
user@linux:~$
然后,我用find -exec删除了它
user@linux:~$ find -type d -exec rmdir {}
我交叉编译了一个用于HummingBoard-Pro (arm处理器)的软件。
该软件仅使用lcm协议接收一些数据。如果我使用交叉编译软件,应用程序接收到的数据是无效的,而如果我使用板载编译软件,则一切正常。
-The软件是完全相同的!-I交叉编译使用cmake和特定的arm工具链。
交叉编译sw的输出示例:
first value 5.73599e+107
second value 5.73599e+107
third value 5.73599e+107
板载编译软件的输出示例:
first value 1
second value 2
third va
我对Ubuntu很陌生。在过去的2-3天里我一直在使用天才动作。当我今天尝试启动它时,它表明virtualbox有问题。我把它安装在回收站上。我已经卸载它,然后从repos重新安装它,然后再卸载它,然后使用.deb从VirtualBox站点重新安装它。试着安装dkms,什么都没发生。试图启动虚拟盒我收到了这条消息,
WARNING: The vboxdrv kernel module is not loaded. Either there is no module available for the current kernel (4.4.0-65-generic) or it f
有没有可能在没有GUI的情况下构建相扑,即没有福克斯工具包(libfox)?
我真的不需要它来塑造我的码头形象。我从相扑的构建指令()中了解到,通过为cmake定义-D FOX_CONFIG=是可以做到的。但是,当构建1.2.0版本(可能更高)时,构建在make上失败,因为它仍然试图查找fx.h。
编辑(添加构建日志):
在sumo-1.2.0/build/cmake-build中,以下是用于:
cmake ../..
-- Setting build type to 'Release' as none was specified.
-- The C compiler iden
我刚开始使用CMake。我在Debian主机上为运行嵌入式Linux的设备使用CMake进行交叉编译。下面是我的CMake工具链文件:
INCLUDE(CMakeForceCompiler)
SET(CMAKE_SYSTEM_NAME Linux) # this one is important
SET(CMAKE_SYSTEM_VERSION 1) # this one not so much
# this is the location of the amd64 toolchain targeting the device
SET(CMAKE_C_COMPILER /
# Try to find IntelIPP
# Once done, this will define
#
# Ipp_FOUND - system has IntelIPP
# Ipp_INCLUDE_DIR - the IntelIPP include directories
# Ipp_LIBRARY - link these to use IntelIPP
include(LibFindMacros)
set(IPP_ROOT_DIR ${CMAKE_CURRENT_SOURCE_DIR}/../libs/intel/linux/intel_ipp)
# Include d
因为我从16.04升级到16.10,所以VirtualBox不能正常工作。我在网上听取了其他一些建议,并取得了初步进展。当我试图运行一个VM时,我会得到一个错误,其中任何一个通常包含要运行的消息:
/sbin/vboxconfig
当我运行时,它会给我一个错误:
vboxdrv.sh: Building VirtualBox kernel modules.
vboxdrv.sh: failed: Look at /var/log/vbox-install.log to find out what went wrong.
下面是vbox-install.log中的内容(这里有一些内容):
Mak
我无法让CMake找到带有Linaro ARM工具链的线程(我已经尝试过几个不同的线程)。以下是我所做的:
下载并解压缩到/opt。
下载了相应的sysroot并解压缩到~/sysroot
我创建了一个工具链-Linaro-arm.cmake文件,如下所示:
set (CMAKE_SYSTEM_NAME Linux)
include (CMakeForceCompiler)
当我试图在Ubuntu Linux上安装Root软件时,我收到了这条消息。请给我一些建议。问题出在哪里?我该如何管理?
-- The C compiler identification is GNU 7.4.0
-- The CXX compiler identification is GNU 7.4.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C
我试图在两个目录中遍历并比较每个文件中的差异iam用于保存文件名的find命令和使用perl散列的数据显然失败--我使用的是SunS 5.10,下面的代码将在Linux上运行
失败的代码段
use strict;
use warnings;
use File::Find;
my (%files1, %files2);
my ($dir1, $dir2) = @ARGV;
find( sub { -f && $files1{$_} = $File::Find::name }, $dir1);
find( sub { -f && $files2{$_} =
我一直在搜索,但我找不到一种方法,在Linux上用一行代码就能找到超过30天的文件和目录,从script_dir开始递归搜索:
cd $script_dir
find . -type f -or -type d -mtime +30
如果我没有执行cd以切换到我需要从其开始递归搜索的目录(并且只直接使用find),那么,尽管我在find处指定了script_dir,递归搜索还是从我当前所在的目录开始,而不是从script_dir开始,而是从该目录下开始。我想要做一些类似以下的事情,即使我当前在script_dir以外的其他目录,从script_dir开始的递归搜索:
find $script_
所以最近我一直在为ARM编译一个rust项目。它对x86的编译非常完美,但是每当我切换到ARM目标时,它都找不到Openssl安装,我已经安装了pkg-config并且可以正常工作,所以这不是那个错误。我自己也不确定如何成功设置OPENSSL_DIR变量,也不知道在哪里可以找到安装程序。错误将完全粘贴在下面 error: failed to run custom build command for `openssl-sys v0.9.61`
Caused by:
process didn't exit successfully: `/home/bob/yagna/blueb
我正在做一个项目,我想为我找到的解决方案做出贡献:
代码是这样的:
while true
do
while read VAR
do
......
done < <(find ........ | sort)
sleep 3
done
日志中的错误,其中:
/dir/script.bin: redirection error: cannot duplicate fd: Too many open files
/dir/script.bin: cannot make pipe for process substitution: T