我从伊恩的睡梦中醒来。大多数情况下,大约45秒后,我可以用ssh连接到机器上。那完全没问题。似乎,当最后一次登录是较长时间以前(几个小时),我不能立即访问服务器大约45秒。我得再等5分钟才能进去。我在/var/log/中找不到任何提示。我能观察到的是:
ME@Laptop:~$ date
Wed 29 Dec 2021 07:04:57 PM CET
ME@Laptop:~$ wakeonlan 17:F2:42:54:04:A6
Sending magic packet to 255.255.255.255:9 with 17:F2:42:54:04:A6
ME@Laptop:~$ pi
好的,这在我过去在编写和使用Linux的经验中没有发生过,但是现在,当我启动IPTables时,我不能以任何可能的方式访问我的网站。SSH还能用。
我的操作系统:
CentOS Linux release 7.2.1511 (Core)
还有我的IPTables里的东西:
# sample configuration for iptables service
# you can edit this manually or use system-config-firewall
# please do not ask us to add additional ports/services to t
我已经应用了以下规则,但仍然无法从服务器1的终端成功地获得ping。
到目前为止,我所读到的所有文档都表明,到目前为止,这应该是可行的(有时需要15分钟才能开始)。我等了几个小时就重新启动但没有成功。
Server 1 (us-west-2c):
Linux: Ubuntu
Outbound Traffic:
All traffic 0.0.0.0/0
Server 2 (us-west-2a):
Windows 2012 Server
Inbound Traffic
Custom ICMP Rule Echo Reply N/A [security group 1] (launch-wi
我有以下设置
| laptop A connected via Wireguard to a server - 192.168.20.3 |
| server B with Wireguard (192.168.20.0) and connected to a LAN (192.168.10.2). Forwarding is enabled |
| server C connected to LAN (192.168.10.3) |
B上的路由表是:
# ip r
default via 192.168.10.1 dev enp3s0 proto static
172.17.0
下面是我想要做的事情(我知道,我这么做是为了为一个项目学习一些东西):我构建了这个模块来捕获所有的传出通信量,检查它是否是ICMP回显消息流量。如果是的话,它只需重新计算ICMP数据包的校验和,然后让它继续前进。
每次我进入这个模块,所有的PING流量都会出现故障,>.<,你能告诉我我在这里做了什么吗?
/*
Coder: Adel *. *******
Creation Date: April/7th/2012
Last Modification Date: April/9th/2012
Purpose: This module is m
我现在正在Debian KVM上设置一个VPNLT2P/IPSec,遵循这个教程:
发出以下命令:
root@localhost:~# ipsec verify
我得到了以下输出
Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path [OK]
Linux Openswan U2.6.28/K2.6.32-5-686 (netkey)
Checking for IPsec suppor
我正试图通过TCP/IP通信与机器人手臂进行通信。它在windows上运行良好,但是当我在linux上试用它时,我无法连接到arm。Matlab一次又一次地尝试连接
Connecting to 169.254.131.130:10300
Connecting to 169.254.131.130:10300
Connecting to 169.254.131.130:10300
Connecting to 169.254.131.130:10300
当我平平安安的时候
PING 169.254.131.130 (169.254.131.130) 56(84) bytes of data.
Fr
因此,在我的syslog中,我注意到很多ICMP数据包被我们的ASA标记:
%ASA-4-313005: No matching connection for ICMP error message: icmp src Internet:x.x.21.122 dst MGMT:x.x.36.55 (type 3, code 3) on Internet interface. Original IP payload: udp src x.x.36.55/53 dst x.x.21.122/47927.
在ICMP回复的发起者(x.122是Linux机器)上执行tcpdump时,我注意到DNS查
在beaglebone上编译时,我得到了这个错误(当然,我还包括了netinet/ip_icmp.h):
src/network.c: In function 'ping':
src/network.c:74:3: warning: implicit declaration of function 'setuid' [-Wimplicit-function-declaration]
src/network.c:74:3: warning: implicit declaration of function 'getuid' [-Wimplicit-
我已经在单独的centos机器和相应的路由表之间配置了GRE隧道,如图所示:
I dont have enough reputation to post images
Router1-------gre1---------Transit-Router---------gre2--------Router2
10.2.32.0/24--Router1--10.0.0.1---gre1---10.0.0.2--Transit-Router--11.0.0.2---gre2--11.0.0.1--Router2--10.4.32.0/24
我可以从路由器-1到gre1隧道的另一端:
worker]#
我使用来自的纯Python实用程序监视网络中的主机,我的ZyWALL USG200路由器正在抱怨如下:
from Any to DMZ, [type=ICMP-Decoder(8911017)] bad-icmp-l4-size ATTACK bad-icmp-l4-size Action: No Action Severity: medium
有什么不对的?
UPD:我将尝试通过USG的维护菜单捕获实际的数据包,并与Linux进行比较.
我尝试使用我的mba(Mba)作为远程无头linux。
其中一个令人讨厌的是,每次重启后,我都无法远程ssh进入它,直到我手动登录的梯度。
重新启动后,ping开始工作,这意味着网络、wifi都在工作。
ping mba
PING mba (192.168.31.82): 56 data bytes
64 bytes from 192.168.31.82: icmp_seq=0 ttl=64 time=5.116 ms
64 bytes from 192.168.31.82: icmp_seq=1 ttl=64 time=4.055 ms
端口22不可访问,这意味着ssh守护进程没有运行。
n