虽然成功地在容器中安装了iperf,但是Docker不识别它:
码头版本:
$ sudo docker version
Client version: 1.0.1
Client API version: 1.12
Go version (client): go1.2.1
Git commit (client): 990021a
Server version: 1.0.1
Server API version: 1.12
Go version (server): go1.2.1
Git commit (server): 990021a
图像信息
root@15cb22522f30:/#uname
我正在尝试在python3上使用iperf3,所以首先我在我的Debian Linux VM上安装了iperf3包,然后我可以验证所有的东西在Python 2.7上都工作得很好。
但是,当尝试使用Python 3.5 (在同一个VM中)导入iperf3模块时,我收到以下消息:
File"<stdin>", line 1, in<module>
ImportError: No module named 'iperf3'
我尝试使用sys.path.append()命令添加iperf目录的位置,但仍然没有成功。
你知道我错过了什么吗?
谢谢。
在linux中的iperf工具无法找到正确的pacakage libiper.so.0(64位)
error failed dependencies
libiperf.so.0(64bit) is needed by the iperf -3.1.2-1.1.x86_64
When trying to install iperf on the linux server
尝试使用中的lib文件,但不成功
请求您共享正确的间隔
我正在尝试在ubuntu 11.10上安装iperf。我建议您安装此。
在我给出./configure之后,错误将是"bash: ./configure: No such file or directory“
然后,我找到了配置的位置,并以./iperf-2.0.5/configure的身份发出了命令。然后,我遵循了该链接给出的进一步步骤。
但是,如果我发出iperf -s -D命令,我会得到如下所示的错误:
The program 'iperf' is currently not installed. You can install it by typing:
su
我想通过运行tclscript (自动化)来运行iperf命令。要在另一台PC (Linux)上运行的iperf命令。我正在使用tclexpect执行相同的操作,要求打开一个控制台并运行iperf命令。代码如下所示。
puts "\n Enter the port no : "
gets stdin sprt
puts "\n Enter the display intervel (in sec) : "
gets stdin sint
global spawn_id
set timeout 40
spawn telnet $ip
expect
我正在使用cygwin在windows环境中编译一个名为"iPerf“的应用程序。
当我尝试使用我的iPerf安装进行./配置时,它会引发以下错误:
configure: error: cannot guess build type; you must specify one
我不知道它试图用它说什么,但是在线搜索并没有多大帮助,如果你想复制我正在做的事情,那么这里是iPerf源代码的链接,我正试图在我的cygwin环境中编译它:
http://sourceforge.net/projects/iperf/
有什么建议吗?
在安装后尝试使用iperf3时,我似乎找不到任何解决AIX相关问题的解决方案:
root@dxxxxxxx in /: iperf3 -s
Could not load program iperf3:
Could not load module /opt/freeware/lib64/libiperf.a(libiperf.so.0).
Dependent module libgcc_s.a(shr.o) could not be loaded.
Could not load module libgcc_s.a(shr.o).
System error: No such fil
我遇到了一个很奇怪的问题。我有2台服务器,一台运行红帽Linux服务器7 64位,另一台运行Windows服务器2012 64位。两个服务器硬件规范完全相同:
Xeon 2.6Ghz CPU x 2, total 32 logical core
96GB ddr4 memory
1Gb dual port network card
2TB hard disk, the RAID configuration is also same.
当我在这两台机器上运行iperf3时,结果是非常不同的。在Linux上,结果是:**
$iperf3 -s
$iperf3 -c localhost
Conne
我有以下脚本:
mkdir Iperf\separate_logs
mkdir Iperf\timestamps
title Setting date and time
echo %DATE% - %TIME% > Iperf\timestamps\iPerf3.log
title [RUNNING] iPerf3
cmd /C "iperf3 -c ip address " > Iperf\separate_logs\iPerf3.log
done;
如何让这个脚本每15分钟运行一次?