dd的命令行语句与其他的 Linux 程序不同, 因为它的命令行选项格式为选项=值, 而不是更标准的--选项 值或-选项=值。...virtual.img # 如果提示设备忙你也可以使用其它的回环设备,"ls /dev/loop*"参看所有回环设备 # 解除设备关联 $ sudo losetup -d /dev/loop0 6 kpartx...为各分区建立虚拟设备的映射 $ sudo apt-get install kpartx $ sudo kpartx -av /dev/loop0 # 取消映射 $ sudo kpartx -dv /
三 ntfs分区在linux下的检查 1 安装最新的ntfs-3g wget http://tuxera.com/opensource/ntfs-3g_ntfsprogs-2012.1.15.tgz tar...losetup /dev/loop0 /w2k8.img kpartx -av /dev/loop0 ntfsfix -b -d /dev/mapper/loop0p1 参数 -b -d非常重要!...ntfsck /dev/mapper/loop0p1 kpartx -dv /dev/loop0 losetup -d /dev/loop0 四 如何挂载qcow2格式的镜像,一条命令搞定!
rootfs.tar 解压到 SD 卡的 rootfs 分区,总的来说感觉有些麻烦,因此本文将制作一个 img 镜像文件可以在 windows 下直接用 Win32DiskImager 一键烧录,或者在 linux...apt-get install dosfstools sudo apt-get install dump sudo apt-get install parted sudo apt-get install kpartx...挂载虚拟磁盘并格式化 这个过程就是将 img 虚拟成 SD 卡一样,挂载到电脑,然后格式化它 1、首先建立虚拟磁盘并分区 sudo losetup /dev/loop0 lichee_zero.img sudo kpartx...losetup -f 自动查找空闲的设备 sudo losetup -f 重新设置到找出的空闲设备上 sudo losetup /dev/loop21 lichee_zero.img sudo kpartx.../rootfs/* /mnt/ # 内容拷贝 sudo umount /mnt # 卸载 六、卸载虚拟磁盘 sudo kpartx -d lichee_zero.img 七、dd 烧录系统 1、格式化
type kpartx >/dev/null 2>&1; then apt update apt install -y kpartx fi # add to /dev/loop loop=`losetup...-f` losetup $loop disk.raw kpartx -av $loop # mount loop0p1 to /mnt mount /dev/mapper/loop0p1 /mnt
命令可以查看使用的loop设备的关联情况 关联命令为 losetup /dev/loop0 /root/win2003.img 关闭关联命令为 losetup -d /dev/loop0 2 使用kpartx...命令将映射分区 kpartx -av /dev/loop0 参数-a 表示添加映射关系,-v表示显示映射的对应关系 映射成功的设备在/dev/mapper下面,比如/dev/mapper/...configuer make make install mount -t ntfs-3g /dev/mapper/loop0p1 /mnt 完成后依次关闭 umount /mnt kpartx
虚拟机扩容(/dev/mapper/centos-root 空间不足) 一、 LVM简介 LVM是 Logical Volume Manager(逻辑卷管理)的简写,它由Heinz Mauelshagen在Linux...输入n,提示后默认输入p,用于创建分区的编号,linux虚拟机一般会有两个sda分别是sda1和sda2,所以接下来默认输入3,表示分配新的磁盘区sda3。...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks...' to 'Linux LVM' Command (m for help): w The partition table has been altered!...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) #reboot //重启系统
Start End Blocks Id System /dev/sda1 * 1 26 204800 83 Linux.../dev/sda2 26 1301 10240000 83 Linux /dev/sda3 1301 1562...2097152 82 Linux swap / Solaris 查看磁盘使用率 # df -h Filesystem Size Used Avail Use% Mounted on...2097152 82 Linux swap / Solaris /dev/sda4 1562 1693 1056046+ 83 Linux Command...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks
linux系统一切皆文件: 1 linux文件系统将一切的设备映射为文件,一切以文件作为访问入口的,以文件的性质来进行open read write close 2 linux设备文件有两类 块设备...55AA 四个十六进制数字 如果是55AA 就是550个字节是有效的否则就是无效的 8 如果单块硬盘大于2t的话现在的mbr技术是无法识别2t以后的磁盘空间的 2t以后可以用 gpt 和uefi linux...查看内核是否已经识别新的分区 cat /proc/partations 7 手动通知系统读取新的分区 partx -a /dev/sda partx -a -n 4-6 /dev/sda 8 另一个方法 kpartx
BJ-CentOS7 ~ # umount /dev/vdc1 root@BJ-CentOS7 ~ # root@BJ-CentOS7 ~ # fdisk /dev/vdc 欢迎使用 fdisk (util-linux...Start End Blocks Id System /dev/vdc1 2048 20973567 10485760 83 Linux...): 将使用默认值 2048 Last 扇区, +扇区 or +size{K,M,G} (2048-62914559,默认为 62914559): 将使用默认值 62914559 分区 1 已设置为 Linux...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) 正在同步磁盘。
0x00063fa6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1026047 512000 83 Linux.../dev/sda2 1026048 20971519 9972736 8e Linux LVM /dev/sda3 20971520 41943039 10485760 8e...Linux LVM 现在,磁盘大小为 21.5 GB。...partition} 3 {partition number} [这时会提示修改大小,选择默认直接回车即可] t {change partition id} 3 {partition number} 8e {Linux...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) 就重启一下系统。
list codes): 8e -----分区为lvm格式 Changed system type of partition 3 to 8e (Linux...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks...再次使用 fdisk -l 查看系统内磁盘情况发现 /dev/sdb上已有一个 Linux LVM 格式的 /dev/sdb1分区 ?
重新分区 删除原来分区,重新创建新的分区 复制 # fdisk /dev/sdb Welcome to fdisk (util-linux 2.23.2)....Start End Blocks Id System /dev/sdb1 2048 1048575999 524286976 83 Linux...size{K,M,G} (2048-1677721599, default 1677721599): Using default value 1677721599 Partition 1 of type Linux...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks
在 Linux 系统里,loop 设备是一种伪设备(pseudo-device),或者也可以说是仿真设备。...连接设备后还需映射分区: sudo kpartx -va /dev/loop0 新的块设备在/dev/mapper目录下,这时候可以用mkfs进行格式化 sudo mkfs.vfat /dev/mapper
全量备份的访问方法 rbd在没有做快照的情况下的备份,导出后是一个文件形式的 rbd export testrbd testrbd 使用下面方法进行直接访问 losetup /dev/loop0 testrbd kpartx...diff_from_BACKUPUTC20171024T191243 执行上面的以后会把快照的差量回滚到全量的那个备份当中 losetup /dev/loop0 testrbd\@BACKUPUTC20171024T190955.full kpartx
-rwxr-xr-x. 1 root root 10275 Mar 26 16:27 20_linux_xen -rwxr-xr-x. 1 root root 2559 Mar 26 16:27 20.../PATH/TO/SOMEFILE Linux文件系统上的特殊权限 权限模型: u, g, o r, w, x 进程的安全上下文: 前提:进程有属主(进程以哪个用户的身份运行).../partitions 有三个命令可以让内核重读磁盘分区表: CentOS 5: partprobe [DEVICE] CentOS 6,7: partx kpartx...命令: partx DEVICE partx -a DEVICE partx -a -n M:N DEVICE M M: :N kpartx...命令: kpartx -af DEVICE Linux文件系统管理 文件系统: VFS:Virtual File System Linux:ext2, ext3, ext4, reiserfs
/dev/sda2 26 1301 10240000 83 Linux /dev/sda3 1301 1497...1572864 82 Linux swap / Solaris /dev/sda4 1497 2611 8952832 83 Linux [root...1572864 82 Linux swap / Solaris /dev/sda4 1497 2611 8952832 83 Linux Command...1572864 82 Linux swap / Solaris /dev/sda4 1497 3916 19436582 83 Linux Command...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks
假设数据盘挂载在一台Linux实例上,实例的操作系统为CentOS 7.3 64位,未扩容前的数据盘只有一个主分区(/dev/vdb1,ext4文件系统),文件系统的挂载点为 /kdata,文件系统扩容完成后...------------------------------demo--------------------------- fdisk /dev/vdb Welcome to fdisk (util-linux...or +size{K,M,G} (2048-62914559, default 62914559): Using default value 62914559 Partition 1 of type Linux...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) 解决方式:实例重启或者reboot...这意味着在重新启动之前,Linux不会知道对/dev/vdb1所做的任何更改——因此在重新启动之前,不应该以任何方式挂载或使用它。 错误:添加分区1失败(设备或资源忙) 最后只能重启实例。
/dev/vda2 1018 20806 9972736 8e Linux LVM Partition 2 does not end on cylinder.../dev/vda2 1018 20806 9972736 8e Linux LVM Partition 2 does not end on cylinder.../dev/vda3 1 2 976+ 83 Linux /dev/vda4 20806 416101...number (1-4): 3 Hex code (type L to list codes): 8e Changed system type of partition 3 to 8e (Linux...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks
The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks...618496 823295 102400 83 Linux /dev/vdb6 825344 1030143 102400 83 Linux...618496 823295 102400 83 Linux /dev/vdb6 825344 1030143 102400 82 Linux...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks...The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks
领取专属 10元无门槛券
手把手带您无忧上云