我正在运行"Essential Linux Device Drivers“一书中的示例"Driver for the Parallel LED Board (led.c)”。一个问题是led_attach()从未被调用过。
这个链接讨论了相同的主题。
“首先注册一个设备名为”class_device“(class_device_create)的led_driver。然后内核知道有一个名为"led”的设备。当您注册该led_driver时,它的名称也是"led",因此内核会匹配这两个名称,并调用led_driver结构的attach函数。“
我确实使用了&
使用NetworkManager或Wicd在我的Wicd驱动的笔记本电脑上管理无线网络,我经常被随机断开连接,我在/var/log/syslog上看到以下消息:
Dec 10 05:21:26 debian dhclient: DHCPREQUEST on wlan0 to 10.0.0.2 port 67
Dec 10 05:21:26 debian dhclient: DHCPACK from 10.0.0.2
Dec 10 05:21:26 debian dhclient: bound to 10.0.0.4 -- renewal in 1662 seconds.
Dec 10 05:4
我正在创建一个简单的VHDL代码,它应该使用8个输入(每个输入4个)来创建两个4位二进制数(A和B),然后根据按下的三个按钮中的一个,在A和B上执行一个逻辑函数,或者是AND,OR,或者XOR。
我担心的是,我试图将多个输入信号映射到单个端口,将多个输出信号映射到单个端口,但我的困惑在于,我成功地实现了一个非常类似的描述,没有任何错误,我将在最后显示无错误描述。如果我的怀疑是正确的,请有人向我解释为什么错误不会发生在下面的代码?
有错误的代码:
use IEEE.STD_LOGIC_1164.ALL;
entity Lab_2_Source_File is
port(A : in STD_L
我已经在Linux中创建了一个Python程序,它可以使NumLock发光二极管闪烁。代码如下所示:
import fcntl
import os
import time
# Define variables for keyboard and NUM_LOCK LED
KDSETLED = 0x4B32
NUM_LED = 0x02
# Open the "keyboard console" for LED toggling
console_fd = os.open('/dev/console', os.O_NOCTTY)
def blink(tme, c
这里有一个简单的代码片段,其问题是编译器无法解决网络"led_int“的多个常量驱动程序。
architecture bdf_type of Test is
signal led_int : STD_LOGIC_VECTOR(4 downto 0);
component misc
port (
reset_reset_n : IN STD_LOGIC;
userleds_external_connection_export : OUT STD_LOGIC_VECTOR(4 DOWNTO 0)
假设我想做一个应用程序,一些硬件和一个驱动程序来与它通信。假设设备连接到主板或通过USB连接。该设备将是一个具有8个The的电路板。我想要的接口是
bool lock() //true if success
void unlock()
//each bit is matched up to an LED and set means the led is on.
//Return value is <0 on error. 0 on success. >0 on noncritical error
int set(char v)
假设非关键错误意味着您在小于200ms的时间内发送
我使用110 WiFi .它过去运行良好,但是在一些配置更改之后,我破坏了一些东西,现在当我插入dongle时,我在lsusb输出中看到了它,但是wlan0没有被创建,dongle上的led也不亮。
要查什么?
~ > uname -a
Linux Distress 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 17:31:43 UTC 2013 i686 i686 i386 GNU/Linux
dmesg显示
[ 667.824095] usb 1-8: new high-speed USB device number 6 using ehci
你好,我想在我的ALTERA DE2上建立一个时钟,我可以通过按键来调整它的长度。现在的问题是,当我从STD_LOGIC_VECTOR转换为UNSIGNED时,代码无法工作:
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
--use ieee.std_logic_unsigned.all; Do not use with numeric_std
entity Adjust_Clock_4_buttens is
port(
clk,clk1 : in STD_LOGIC;
minute
我有一个。我正在使用设置一个从STM32到PC的conexion。我想通过串行发送一个字符序列到董事会。作为一个答案,我期待一个闪烁的LED。例如:led1导致LED ON,led2导致LED OFF。
问题是我不知道如何设置连接的端口。
#include "mbed.h"
#include "USBSerial.h"
//Virtual serial port over USB
USBSerial serial;
int main(void) {
while(1)
{
serial.printf("I am a v
我是一个VHDL编程的新手,目前正在尝试执行一个程序,在这个程序中,FPGA板上的LED应该在发送完我从Linux服务器生成的每10个以太网数据包后亮起。我写的代码在以下代码中,它不能正常工作。我正在试着解决这个问题,但还是没能解决。任何帮助都将不胜感激。
---------------------------------------------
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
--------------