我在WIN 7机器上安装了用于mips32体系结构的codesourcery交叉编译工具链。我想首先为我的路由器编译一个简单的“阶乘”二进制文件,它是基于MIPS32的。从互联网上的小搜索中,我发现它是基于MIPS32大端的.
#cat /proc/cpuinfo
system type : 96338W2
processor : 0
cpu model : BCM6338 V1.0
BogoMIPS : 239.20
wait instruction : no
micr
我正在尝试在linux平台(ARM 8148)上交叉编译opencv。
我收到以下错误:
warning: libQtTest.so.4, needed by ../../lib/libopencv_highgui.so.3.0.0, not found (try using -rpath or -rpath-link)
/opt/CodeSourcery/Sourcery_G++_Lite/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/../../../../arm-none-linux-gnueabi/bin/ld: warning: libQtC
我试图使用install.packages('')选项以及从源代码在R中安装'pmml‘包。但两种方式都会有错误。
从R
install.packages('pmml',dependencies=T)
Cannot find xml2-config
ERROR: configuration failed for package ‘XML’
* removing ‘/home/PepperBoy/R/x86_64-pc-linux-gnu-library/3.2/XML’
ERROR: dependency ‘XML’ is not available f
在同一文件夹中有两个文件夹,如下所示:
1.src (it contains my cpp file)
2.linux (where I am running g++ and executing o file)
现在,我正在运行以下命令
cd linux
g++ --coverage ../src/example1.cpp -o example1
./example1
cd ..
/opt/gcovr-3.2//scripts/gcovr -v -r .
我得到了0%的覆盖率
扫描目录。对于gcda/gcno文件..。
找到2个文件(并将处理1个)
运行gcov:'gcov /o
我已经为Raspi-0交叉编译了libedgetpu,并且我可以运行一个最小的C++程序。但是,它没有检测到任何TPU。( Coral TPU通过USB端口连接到Pi-0)。 pi@raspberrypi:~ $ lsusb
Bus 001 Device 004: ID 1a6e:089a Global Unichip Corp.
Bus 001 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 001 Device 002: ID 1a40:0101 Term
我按照本教程编译用于ARM的Linux内核3.2,并使用QEMU进行仿真:
我现按以下步骤行事:
wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.2.tar.bz2
tar xjf linux-3.2.tar.bz2
export ARCH=arm
export CROSS_COMPILE=arm-linux-gnueabi-
cd linux-3.2
make vexpress_defconfig
make all
cd ..
arm-linux-gnueabi-gcc -static i
我正在通过VMware运行Fedora 19,我想编译和运行,一个简单的C程序。但是,在运行which gcc之后,我得到:
/usr/bin/which: no gcc in (/home/demetres/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_GNU_Linux/bin:/home/demetres/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_GNU_Linux/bin_cache:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/
我的应用程序使用SQLite数据库来存储数据。理想情况下,这个数据库应该驻留在某个网络驱动器上,让我们将其命名为Z:(Windows XP的“映射网络驱动器”功能)。
正在开发Linux下的应用程序,数据库存储在本地。以下是其中一个模块的一部分:
import sqlite3 as lite
con = lite.connect("base.db")
访问Z:驱动器上的数据库的正确方法是什么?大致是这样的:
import sqlite3 as lite
import os
path = 'Z:\'
con = lite.connect(path+"b