当我尝试执行sudo opensnoop-bpfcc时,我得到这样的消息:
In file included from /virtual/main.c:4:
In file included from include/linux/sched.h:14:
In file included from include/linux/pid.h:5:
In file included from include/linux/rculist.h:11:
In file included from include/linux/rcupdate.h:40:
In file included from inclu
我试图在运行Debian 4.3.2.1-1的web服务器上安装Python2.6.5。我解压tarball,运行“.配置-前缀/usr/",然后运行"make”。我看到这条留言了。
Failed to find the necessary bits to build these modules:
_bsddb _hashlib _ssl
_tkinter bsddb185 bz2
dl imageop
我试图在Ubuntu14.04LTS中安装MiKTeX。我正在逐个下载依赖项,但下面是我陷入困境的地方:
CMake Warning at /usr/share/cmake-2.8/Modules/FindQt4.cmake:659 (message):
/usr/bin/qmake reported QT_INSTALL_LIBS as "/usr/lib/x86_64-linux-gnu" but
QtCore could not be found there. Qt is NOT installed correctly for the
target buil
我遵循了链接:(http://www.howopensource.com/2011/08/how-to-compile-and-install-linux-kernel-3-0-in-ubuntu-11-04-10-10-and-10-04/)中的这些步骤,但是这些命令不起作用:
sudo make modules_install install
sudo make
sudo make oldconfig
sudo make menuconfig
错误消息
📷
我把Ubuntu下载到我的电脑上,而我的USB wifi适配器不工作,所以我把驱动程序下载到我的手机上,并把它转到我的电脑上。一旦发生这种情况,我就试着运行install.sh文件,但是我一直收到这个错误:
Authentication requested [root] for make clean:
bash: make: command not found
Authentication requested [root] for make driver:
bash: make: command not found
####################################
Co
获取以下错误时:pip安装lxml
You are using pip version 6.0.8, however version 7.1.0 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
Collecting lxml
Using cached lxml-3.
我下载了。我正在尝试交叉编译它,以便ARM(PandaBoard)运行精简版本的linux。
在配置的初始设置中,我尝试
Shell$ ./configure --host=ARM
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking for correct TEA configuration... ok (TEA 3.9)
所以我尝试重新编译我的内核(它没有uinput支持,但是nm支持)。我遵循了如何在14.04上安装所需的Qt包来构建内核?上的说明,但是
当我运行~/Downloads/linux-2.6.32.68$ make xconfig时,我得到了这个。
CHECK qt
Unable to find the QT3 installation. Please make sure that the QT3 development package is correctly installed and either install pkg-config or set the QTDIR environmen