我正在使用嵌入式设备,并希望使它们能够通过Linux调整MTD分区的大小,而无需重新启动。
问题是我的Linux映像大小增加了,而它所在的当前MTD分区(mtd0)现在太小了。但是,它后面的分区(mtd1)是一个用于存储配置信息的JFFS2部分,因此重新启动调整大小不是一个选项,因为配置可能会丢失。
我的目标是:
1. Copy contents of JFFS2 into /tmp/
2. Unmount JFFS2 from mtd1
3. Increase the starting offset + reduce size of mtd1 by X bytes (or delete mt
如何在linux中访问和更改u变量。使用u引导目录中的u- boot /tools/env目录:
u-boot$ make env
它创建了可执行文件fw_printenv。我将其复制到/usr/sbin和目标etc/fw_env.config文件上:
# Configuration file for fw_(printenv/saveenv) utility.
# Up to two entries are valid, in this case the redundand
# environment sector is assumed present.
# MTD device name
我如何在不重新加载整个模块的情况下解析我注入的方法的RVA?
我总是得到0作为添加的方法的RVA。有没有什么方法可以在不编写和重新加载程序集的情况下检索RVA?谢谢!
AssemblyDefinition asm = AssemblyDefinition.ReadAssembly("hello.exe");
ModuleDefinition mod = asm.MainModule;
TypeDefinition modType= mod.GetType("PrintClass"); //get class found in hello.exe
MethodD
我有一个YTD和MTD的年份下拉列表,字段名为datavalue_1和month_name,参数名为Month_parameter。因此,当我从下拉列表中选择YTD时,它应该显示sum of datavalue_1 where month_name<=Month_parameter,当我从下拉列表中选择MTD时,它应该显示该月的sum of datavalue_1。我的意思是,如果选择9月,那么YTD应该返回从1月到9月的datavalue_1总和,如果选择MTD,那么它应该返回9月的datavalue_1总和。
我该如何写出这方面的计算。提前感谢!问候
我想构建openthread for Linux (POSIX),并使用这个库来开发一个CoAP客户端应用程序。
现在我已经在Makefile-posix中禁用了UDP_FORWARD,并在src/core/config/platform.h文件中启用了OPENTHREAD_CONFIG_PLATFORM_UDP_ENABLE 1。
我的构建失败,出现以下错误:
Making all in apps Making all in cli CC ot_cli_ftd-main.o C
C ot_cli_mtd-main.o CCLD ot-cli-mtd
我正在尝试使用MTD设备来存储在Licheepi上。我已经成功地添加和使用了i2c和spidev,但是我不能使jedec、spi-也不能在内核启动期间执行。
我的dts是(我尝试过许多不同的方法):
&spi0 {
pinctrl-0 = <&spi0_pins>; // tried without these two lines
pinctrl-names = "default";
status = "okay";
/* tried with and without this */
/*cs-g