我习惯于打字
$ cd
在bash中没有参数导航到我的主目录。
然而,由于一些未定的时间,这不再起作用,只是什么也不做。
设置了我的HOME变量:
$ echo $HOME
/home/me
这怎么可能呢?上面写着
If no directory operand is given and the HOME environment variable is set to a non-empty
value, the cd utility shall behave as if the directory named in the HOME environment
variable was speci
我是ubuntu社区的新成员。我遇到了17.04的问题:即使在运行了大多数推荐的脚本之后,我仍然无法解决下面的错误。我能做什么?
linux-signed-image-4.10.0-33-generic : Depends: linux-image-4.10.0-33-generic (= 4.10.0-33.37) but it is not going to be installed
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
我遇到这个问题已经有一段时间了,我不知道如何解决这个问题,因为我对Linux还比较陌生。每当我试图通过终端安装一些东西时,我就会在终端处看到以下几条线:
Reading package lists... Done
Building dependency tree
Reading state information... Done
wget is already the newest version (1.20.3-1ubuntu1).
wget set to manually installed.
build-essential is already the newest ver
我对Linux非常陌生,所以需要解释一下:-)
将Ubuntu从13.04更新到13.10,在GRUB中选择Ubuntu后,出现了一个黑色屏幕。我仍然可以选择GRUB中的任何其他操作系统,包括Ubuntu的恢复模式。
我当前的GRUB2选项是:
Ubuntu (<-- this is the one that black screens, 13.10)
Ubuntu Recovery Mode
Memtest
Mint
Mint Recovery Mode
Ubuntu (different, old install, 13.04)
" Recovery Mode
Windows
我该如何摆脱
Welcome to Linux Lite 5.2 user Friday 13 November 2020, 00:00:00 Memory Usage: 1698/7913MB (21.46%) Disk Usage: 22/456GB (5%) Support - https://www.linuxliteos.com/forums/ (Right click, Open Link)
从终点站启动?
我正在尝试删除一个包:sudo apt-get remove pgbouncer,但随后我得到了以下错误:
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
linux-server : Depends: linux-im
我试图让Ubuntu直接引导到控制台。我不想完全删除GUI,因为有时我仍然需要它来训练车轮,但是如果我不需要它,我不想处理它。在以前的版本中,我可以很容易地通过编辑/etc/default/grub来实现这一点,但由于某种原因,它无法在15.10上工作。
这是我的/etc/default/grub文件:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this fi
每当我在终端中安装、更新或卸载程序时,就会出现这样的情况。
sudo apt-get autoremove
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED
linux-headers-3.2.0-35-generic-pae
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully
我试图在Ubuntu16.04.2上安装解压缩。在行(Reading database...上需要很长时间才能完成更新百分比
我一直收到以下输出:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
linux-headers-4.4.0-64-generic linux-headers-4.4
我的问题是,每当我启动笔记本电脑时,它都会显示启动菜单,我必须选择我想使用的Ubuntu。我搜索了网络,发现其他人也有同样的问题,但是他们把计时器设置为0的解决方案对我不起作用。
我试过的是:
sudo nano /etc/default/grub
GRUB_TIMEOUT=0
然后我运行了sudo update-grub。
我还是有问题的。我运行了Ubuntu18.04.2的新安装。
该文件如下所示:
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
我在windows中运行boot2docker虚拟机,需要修改虚拟机中的初始化脚本。目前我唯一的选择是VI,这很痛苦。我只想用nano,但现在还没有。
它正在运行:
docker@boot2docker:/c$ uname -a
Linux boot2docker 3.18.5-tinycore64 #1 SMP Sun Feb 1 06:02:30 UTC 2015 x86_64 GNU/Linux
没有apt-get或任何包管理器。怎样才能添加nano,这样我就可以轻松地编辑文件了?
编辑:
@John-Petrone的答案是有效的,但在安装后,运行nano会给出错误:
Error ope
我正在设置一个nvidia jetson nano来运行docker容器。我正在使用我已经在我的x86_64 Ubuntu16.04机器上使用的安装程序,docker运行得很流畅。尽管如此,docker似乎设置正确,但我无法运行它。 我按照http://nvidia.com/jetsonnano-start中的描述刷新了jetson SD卡,并通过键盘和屏幕设置了语言等。在那之后,我变得无能为力,通过ssh安装了它。我使用的命令如下面的清单所示。 # in case apt-get is interrupted, e.g. if board freezes, use: $ sudo dpkg
我昨晚安装了自制软件,使我能够在我的Ubuntu20.4上安装wtfutil终端。我成功了,后来决定卸载它。
它似乎卸载正常,但留下了一些错误,我不明白。我是Ubuntu/Linux的新手,所以这让我很困扰,因为我输入密码后无法访问我的桌面。
以下是完整的错误:
Error found when loading /home/[user]/.profile
/home/[user]/.profile: line 28: /home/linuxbrew/.linuxbrew/bin/brew: No such file or directory
As a result the session