include //提供通用的文件、目录、程序及进程操作的函数 #include //文件夹操作函数 #ifdef Android #include #include #include #include #include <linux/...数据类型定义 #include //select模型相关函数 #include //提供IP地址转换函数 //#include <sys/poll.h
解决问题 Linux健全的API已经为我们提供了解决问题的方法,在此我们引入select()函数、poll函数。...[在Linux中,timeout指的是程序在非sleep状态中度过的时间,而不是实际上过去的时间,这就会引起和非Linux平台移植上的时间不等问题。...poll函数: 1#include 2int poll(struct pollfd fds[], nfds_t nfds, int timeout); poll和select实现功能差不多...在SVR4(可能更早的一些版本)中的 "poll.h"文件中包含了用于确定事件的一些宏定义。...stdlib.h> 2#include 3#include 4#include 5#include 6#include <poll.h
1.先说select在多路IO中的限制: 1)linux中每个程序能够打开的最多文件描述符是有限制的。默认是1024....2.poll函数 先看man手册(截取部分): SYNOPSIS #include int poll(struct pollfd *fds, nfds_t...revents的值可以是下面: The bits that may be set/returned in events and revents are defined in <poll.h...POLLRDHUP (since Linux 2.6.17) Stream socket peer closed connection, or shut down...#include #include #include #include #include<poll.h
这就要分析我们的驱动程序.poll函数(第2小节开始分析.poll函数) 2写驱动程序.poll函数,并分析.poll函数: 在上一节驱动程序里添加以下代码: #include <linux/poll.h...描述字不是一个打开的文件 所以POLLIN | POLLRDNORM:普通数据可读|优先级带数据可读 mask就返回到应用层poll函数, 3.改进测试程序third_poll_text.c(添加poll函数) 在linux...中可以通过man poll 来查看poll函数如何使用 poll函数原型如下(#include ): int poll(struct pollfd *fds, nfds_t nfds,...> #include #include #include #include #include <poll.h
计算gpio IO 号 在 Linux 系统中,GPIO 通常由 Pinctrl 系统进行管理。...Linux 定义了 Pinctrl 框架,统一了各大 SoC 厂商的 Pin 管理方式,避免了各大厂商自行实现自己的 Pin 管理系统,是一个非常有用的功能。... #include #include #include #include #include #include #include #include #include #include <poll.h
Linux内核版本: 3.5 1.1 Linux下RTC时间的读写分析 1.1.1 系统时间与RTC实时时钟时间 Linux系统下包含两个时间:系统时间和RTC时间。.../*内核定时器*/ #include #include /* poll机制*/ #include...> #include /*内核定时器*/ #include #include /* poll机制*/ #include /* 平台设备驱动相关头文件*/ #include <linux.../*内核定时器*/ #include #include /* poll机制*/ #include
second_drv.c #include #include #include #include <linux...Third_drv.c #include #include #include #include <linux...Forth_drv.c #include #include #include #include #include #include #include #include #include #include static struct class *sixthdrv_class
button_async, SIGIO, POLL_IN); //当有中断时,就发送SIGIO信号给应用层,应用层就会触发与SIGIO信号对应的函数 3.4 驱动程序代码如下: #include #include #include #include #include #include #include #include #include #include #include #include ...include #include #include #include #include <poll.h
先写出模板 #include #include #include #include #include #include #include #include ... #include #include /*DEV INIT*/ static int __init gpio_init... #include #include #include #include #include #include #define DEVICE_NAME "gpiodrv" #define GPIO_MAJOR
将 sleep(4); 注释掉,观察服务器端的输出如下: simba@ubuntu:~/Documents/code/linux_programming/UNP/socket$ ....二、poll 函数应用举例 #include int poll(struct pollfd *fds, nfds_t nfds, int timeout); 参数1:结构体数组指针.../inet.h> #include #include #include #include #include<poll.h.../code/linux_programming/UNP/socket$ ....参考: 《Linux C 编程一站式学习》 《TCP/IP详解 卷一》 《UNP》
> #include #include #include #include #include #include #include #include ... #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include
网络IO模型 linux网络IO中涉及到的模型如下: (1)阻塞式IO (2)非阻塞式IO (3)IO多路复用 (4)信号驱动IO (5)异步IO 今天不谈信号驱动IO,略过.....只有使用了特殊的 API 才是异步 IO,例如Linux网络中的AIO。...#include int poll(struct pollfd fds[], nfds_t nfds, int timeout); 参数说明 struct pollfd fds:是一个...描述符的总数量; ==0:数组fds中没有任何socket描述符准备好读、写,或出错;此时poll超时 -1:poll函数调用失败 poll使用 #include #include <poll.h
1、linux启动流程: (1)加载BIOS (2)读取MBR (3)运行BootLoader (4)加载内核 (5)用户层Init依据inittab文件来设定运行等级 (6)init进程执行rc.sysinit...具体来源:Linux 内核将所有外部设备都看作一个文 件来操作,对文件的操作都会调用内核提供的系统命令,返回一个 fd(文件描述符)。...作了很多重大改进,现总结如下: ①支持一个进程打开的文件句柄 FD 个数不受限制(为什么 select 的句柄数量受限 制:select 使用位域的方式来传递关心的文件描述符,因为位域就有最大长度,在 Linux...fd_set *exceptset,const struct timeval *timeout) //返回值:就绪描述符的数目,超时返回 0,出错返回-1 ②poll 函数调用格式: # include <poll.h
2、poll函数 函数格式如下所示: # include int poll ( struct pollfd * fds, unsigned int nfds, int timeout...> 4 #include 5 6 #include 7 #include 8 #include 3 #include 4 #include 5 #include 6 #include <poll.h
FIONREAD support */ 检查 sockfd 表示的文件描述符中有多少数据可以读取 example #include #include #include <poll.h
poll函数的解析: 使用poll函数,需要包含头文件:#include int poll(structpollfd fds[], nfds_t nfds, int timeout);...应用程序的实现: #include #include #include #include #include <poll.h
nready <= 0) break; } } } return 0; } #include <poll.h...#define _GNU_SOURCE /* See feature_test_macros(7) */ #include #include <poll.h
epoll 直到Linux2.6才出现了由内核直接支持的实现方法,那就是epoll,它几乎具备了之前所说的一切优点,被公认为Linux2.6下性能最好的多路I/O就绪通知方法。...实际上,当前版本的Linux会自动修改timeout参数,设置它的值为剩余时间。...它解决了select()的几个不足,尽管select()仍然经常使用(多数还是出于习惯,或者打着可移植的名义): #include int poll (struct pollfd...pollfd结构体定义如下: #include struct pollfd {int fd; /* file descriptor */short events; /* requested...4.内核微调 这一点其实不算epoll的优点了,而是整个linux平台的优点。也许你可以怀疑linux平台,但是你无法回避linux平台赋予你微调内核的能力。
Linux 文件系统 目录 说明 bin 存放二进制可执行文件 sbin 存放二进制可执行文件,只有 root 才能访问 boot 存放用于系统引导时使用的各种文件 dev 用于存放设备文件 etc...是超级管理员 localhost 表示主机名 ~ 表示当前目录(家目录),其中超级管理员家目录为 /root,普通用户家目录为 /home/chan $ 表示普通用户提示符,# 表示超级管理员提示符 Linux...test.tar.gz 文件搜索命令 locate:在后台数据库搜索文件 updatedb:更新后台数据库 whereis:搜索系统命令所在位置 which:搜索命令所在路径及别名 find:搜索文件或文件夹 用户和组 Linux
IO复用是Linux中的IO模型之中的一个,IO复用就是进程预先告诉内核须要监视的IO条件,使得内核一旦发现进程指定的一个或多个IO条件就绪,就通过进程进程处理。从而不会在单个IO上堵塞了。...Linux中。提供了select、poll、epoll三种接口函数来实现IO复用。...printf("recv: %s\n", buf); } } close(connfd); close(listenfd); return 0; } 2、poll函数 #include <poll.h...*/ #include #include #include #include #include <sys/poll.h...} } } } } close(connfd); close(listenfd); return 0; } 3、epoll系列函数 epoll是Linux
领取专属 10元无门槛券
手把手带您无忧上云