我希望我的静态路由自动加载到VPN重新连接。根据Debian上的wiki,这可以通过在/etc/network/if-pre-up.d/中放置一个脚本来完成,这就是我看到的:
#!/bin/bash
ip route add 10.8.0.0/24 dev ppp0
ip route add 192.168.0.0/24 dev ppp0
在linux启动时,这个脚本运行得很好,但是在VPN重新连接时它不会运行。为什么?
我的/etc/网络/接口文件:
auto lo eth0 eth1 asus
iface lo inet loopback
iface eth0 inet dhcp
ifac
我有一个从C程序内部调用的脚本。我在启动线程之前执行此操作,因为我需要在这些线程启动之前建立ppp链接。我做了以下工作: int main(){
int ret = 0;
ret = WEXITSTATUS(system("./nbiot_telit_ppp_installer.sh"));
printf("ret = %d\r\n", ret);
// Never gets here after ppp is up
/* Start the threads */
==> starts thread-1
我有个老问题。当我想通过分接头适配器或pptp连接连接pptp时,断开连接,并在消息日志中获取以下错误:
linux pptpd[20275]: GRE: read(fd=7,buffer=60a400,len=8260) from network failed: status = -1 error = Message too long
linux pptpd[20275]: CTRL: GRE read or PTY write failed (gre,pty)=(7,6)
linux pppd[20276]: Modem hangup
linux pppd[20276]: Connect
我正在尝试构建pptp (ppp)模块,但遇到了错误"slhc:关于symbol module_layout的版本不一致“。 我已经和这个问题斗争了大约一个星期了,所以我想是时候看看有没有人能帮忙了。另外,在你说之前,是的,我已经在谷歌上搜索过了,但是所有的答案要么都过时了,要么根本解决不了这个问题。我正在运行一台ReadyNAS 312。 这是我计算出的“应该”的工作…… cd ~/src
wget https://www.downloads.netgear.com/files/GPL/ReadyNASOS_V6.9.5_WW_src.zip
mkdir ReadyNAS
cd R
我的linux系统上有一个文件test.txt,它的数据格式如下:
first second third fourth 10
first second third fourth 20
fifth sixth seventh eighth 10
mmm nnn ooo ppp 10
mmm nnn ooo ppp 20
我需要修改格式如下-
first second third fourth 10 20
fifth sixth seventh eighth 10 0
mmm nnn ooo ppp 10 20
我试过以下代码
cat test.txt | sed
我有一个python脚本,它是从if-up脚本运行的,该脚本在建立PPP连接时由Linux上的ppp程序调用。python脚本基本上调用一个命令行程序,解析结果并返回它:
import subprocess
result = subprocess.check_output(["fw_printenv", "serialnr"])
result = # some operation
return result
虽然当我从命令行手动运行python脚本(例如python script.py)时,这段代码的工作效率是100%好的,但是当它是由PPP从if-up运行
我正在尝试使用Ubuntu11.04中的三星corby Mate连接互联网,它显示:
$ lsusb
Bus 005 Device 005: ID 04e8:663f Samsung Electronics Co., Ltd SGH-E720/SGH-E840
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux