我尝试为一个使用QT4和sqLite的开源项目构建一个快照文件。经过几次迭代,构建工作得很好,但是现在,我无法启动这个程序。似乎有两个问题:
字体乱七八糟(见截图)
不能加载db驱动程序。
我的重点是后者:
QSqlDatabase: QSQLITE driver not loaded
QSqlDatabase: available drivers:
Cannot open DB
我看到文件libqsqlite.so正在加速。似乎数据库驱动程序路径是硬编码到/usr/lib/x86_64-linux-gnu/qt4/plugins/sqldrivers/中的,在预先构建的QT库中的某个位置,
我正在尝试在QtCreator上构建一个Qt项目(已经可以在Ubuntu上运行了)。我想在调试模式下构建它,然后在发布模式上构建,因为我希望将我的应用程序部署到Windows。 在第一次编译项目时,我遇到了以下错误C1083: Cannot open include file 'libusb.h' no such file or directory。我通过将libusb.h文件从E:\Qt\5.11.2\Src\qtwebengine\src\3rdparty\chromium\third_party\libusb\src\libusb复制到我的编译器文件夹E:\Qt\5.1
试图编译pymini,埃克勒软件 on RPI3,Ubuntu 16.04我获得了以下输出./配置与错误:配置:错误:找不到libusb-devel 1.0支持
tim@tim-desktop:~/pymini-1.16$ ./configure
checking build system type... armv7l-unknown-linux-gnueabi
checking host system type... armv7l-unknown-linux-gnueabi
checking for gcc... gcc
checking whether t
由于CGO_ENABLED=1的依赖关系,我正在尝试交叉编译Raspberry Pi的Golang应用程序。
在编译过程中,我得到了错误:
arm-linux-gnueabihf/bin/ld: warning: libudev.so.1, needed by /usr/lib/arm-linux-gnueabihf/libusb-1.0.so, not found (try using -rpath or -rpath-link)
我尝试了以下命令的多个变体,但没有结果:
CGO_ENABLED=1 GOARCH=arm GOARM=7 PKG_CONFIG_LIBDIR=/usr/lib/
Linux发行版: CentOS Linux7.4.1708(核心)
内核:3.10.0-693.2.el7.x86_64
问题:
# lsusb
lsusb: error while loading shared libraries: libusb-1.0.so.0: cannot open shared object file: No such file or directory
# ldd /usr/bin/lsusb
linux-vdso.so.1 => (0x00007ffd446e0000)
libusb-1.0.so.0 => not found
libc.so
我正在尝试运行中包含的测试实用程序,以便最终为CY7C65215A创建一个linux USB串行应用程序。
我已经浏览了顶级的自述文件,并构建了使用这些使用SDK所需的libusb-1.0.9库。
我很简单地遵循了其余的安装说明,创建了库,然后编译了测试实用程序。
在使用'sudo‘运行应用程序之后,我得到以下SDK调试消息。
CY:Kernel driver active on the interface number 0
CY:Info The total number of endpoints are 2
CY:Info The Endpoints are in 131 an
我有一个USB HID天平,我需要从那里获取称重报告。在Linux上,我可以通过一次从/dev/hidraw#读取7个字节来做到这一点,但是我希望使用libusb-1.0获得相同的信息。
即使我得到了一些非空字节,我也会得到错误-9:LIBUSB_ERROR_PIPE
我正在尝试使用如下的控制转移:
#define WEIGH_REPORT_SIZE 7
/*
* Open a handle to the found scale
*/
libusb_open(dev, &handle);
#ifdef __linux__
libusb_de