我正在中编译程序,在运行命令sudo make headers_install && sudo make M=samples/bpf之后,错误显示为agian。事实上,我被困在这里很长时间了。第一次错误是我的ubuntu出了问题。所以我重新安装了它。但现在这个错误很奇怪。
skeleton/pid_iter.bpf.c:47:14: error: incomplete definition of type 'struct bpf_perf_link'
perf_link = container_of(link, struct bpf_perf_
我有一个无线接口,我正在尝试安装他们的Linux驱动程序从这里开始。
当我运行install.sh (我只有CLI)时,我会得到这些错误。我该怎么做呢?这是一台64位的机器。
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c: In function ârtw_proc_init_oneâ:
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9
我想在代码3中打印这两个输出,不幸的是,它不能工作。
代码1
with open('file.txt') as f:
r = f.read()
print(r)
产出1
user@linux:~$ python3 script1.py
line 1
line 2
line 3
user@linux:~$
代码2
with open('file.txt') as f:
rs = f.read().splitlines()
print(rs)
产出2
user@linux:~$ python3 script2.py
['line
我正在尝试安装a6210的驱动程序。
我执行了:
git clone https://github.com/genodeftest/Netgear-A6210.git
make
我收到了一条错误信息:
In function ‘memcpy’,
inlined from ‘rt_ioctl_iwaplist’ at /media/angelo/Elements1/netgear_linux/Netgear-A6210/os/linux/../../os/linux/sta_ioctl.c:549:2:
./include/linux/string.h:305:4: error: cal
我在Ubuntu18.04下使用virtualenv venv -p python3和source venv/bin/activate创建了一个虚拟环境。然后我尝试安装,它会根据需要安装。ConfigSpace安装失败,并抛出以下错误:
Building wheel for ConfigSpace (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /home/anonymous/Documents/some_folder/venv/bin/python -u -c 'imp
我遇到了一个奇怪的错误。我不知道为什么会发生。它不会使程序崩溃,它只是向控制台返回一些奇怪的消息。当程序第一次运行时,它通常会显示出来(我的意思是:错误发生的方法第一次执行)。我从来没有经历过这样的事情,我会感谢你的帮助!
控制台中的错误消息:
[20:19:01] [Craft Scheduler Thread - 696 - DiscordUtils/ERROR]: [DiscordUtils] [STDERR] Could not detect EOL Linux Distribution because of the following error: Cannot read the a
第一个函数将在单独工作时工作。
功能:
function Get-Search {
$find = Read-Host "Type of Git to search"
$url = 'https://github.com/search?q=' + $find
Write-Host ""
Write-Host "Here is a list of the top 10 results:"
$contributors = Invoke-WebRequest -Uri $url -UseBasi
由于我升级到15.10,我的拇指驱动器不是自动安装时,我插入我的棍子。德梅格里什么都没有。以下是syslog的日志:
Dec 30 07:28:55 thomas-linux-box kernel: [174764.056053] usb 8-1.8: new
full-speed USB device number 10 using ehci-pci
Dec 30 07:28:55 thomas-linux-box kernel: [174764.128031] usb 8-1.8: device descriptor read/64, error -32
Dec 30 07:28:55
我希望在Linux和Windows上以一致的方式从串口读取数据。我注意到read()和ReadFile()的行为略有不同。考虑以下代码:
// on Linux
int r = read(fd, buf, 256);
// on Windows
ReadFile(handle, buf, 256, &r, NULL);
这两个函数都将永远阻塞,直到数据到达。到现在为止还好。但是,有一点不同:read()将在至少1个字节到达时立即返回,而ReadFile()在所有256个字节到达之前不会返回。
因此,我想问:有没有办法让ReadFile()的行为像Linux上的read()一样,也就是
我正在编写一个perl脚本,用于引导linux映像,并需要检测映像是否到达登录提示符。我使用Device::serial模块与开发板进行通信。我在检测登录字符串时遇到问题。我认为这可能与linux引导过程中发生的大量打印有关。下面的代码尝试捕获提示符。奇怪的是,只有当我添加了不必要的"read“命令时,它才能工作
# Wait for login prompt
$port->are_match("login:");
$gotit = "";
$timeout = 60;
until (($gotit ne "") or ($ti
我编写了一个linux模块来创建一个proc文件,并从它中写入和读取数据。但我无法删除模块,它显示了一个错误,无法删除说“设备或资源繁忙。这是我的代码。”
#include<linux/module.h>
#include<linux/kernel.h>
#include<linux/fs.h> /*this is the file structure, file open read close */
#include<linux/cdev.h> /* this is for character device, makes cdev avilab
乌本图20.04我使用包安装了virtualbox;它成功了,我创建并运行了一个RM。但是在软件更新之后就停了下来。我不能运行VM,消息说:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver is either not loaded or not set up correctly.
Please reinstall virtualbox-dkms package and load the kernel module by executing
'modprobe vboxdrv'