我已经编写了一段代码,但是它需要大量的时间来运行,我不知道如何使它更快。有谁可以帮我?
这里是代码:
import networkx as nx
import matplotlib.pyplot as plt
import osmnx as ox
import pandas as pd
from shapely.wkt import loads as load_wkt
import numpy as np
import matplotlib.cm as cm
ox.config(log_console=True, use_cache=True)
import matplotlib as mpl
我有两个MySQL数据库,A和B,它们有相同的硬件和模式。他们有不同的数据和数据库A有更多的数据比B。数据库A也运行5.1版本,而B是5.5。所涉及的表格相当大。
我正在对这两种情况进行查询:
SELECT atr.id as id, count(*) as ticket_count
FROM cba_ticket t
JOIN cba_ticket_custsvc tcs ON t.id = tcs.ticket_id
JOIN cba_delivered_address da ON tcs.route_address_id = da.route_address_id
JOIN cba
操作系统为ubuntu 16.04
MySQL版本:MySQL Ver 14.14 Distrib 5.7.19, for Linux (x86_64) using EditLine wrapper
在我的系统中
/etc/mysql/ -> ls
conf.d debian.cnf debian-启动my.cnf my.cnf.fallback mysql.cnf mysql.conf.d
在该文件中,我需要配置以获取通用查询日志和慢查询日志。
我试图在Ubuntu 17.04上安装无线pci适配器Asus pce-ac51,因为5 5Ghz带不能在Ubuntu上工作(它在Windows 10上工作),但是当我尝试运行sh脚本时,我会得到以下错误
tar: La opción antigua 'f' requiere un argumento
Pruebe 'tar --help' o 'tar --usage' para más información.
install.sh: 25: cd: can't cd to clean
install.sh: 38: [: unexp
我必须配置NAT,并在连接到Linux盒的两个网关之间手动拆分internet流量。
如果每个网关都有特定的IP地址,则没有问题。我可以通过iproute2做到这一点:
ip route add default via 192.168.1.1 dev eth1
ip route add 2.3.4.5 via 192.168.0.1 dev eth0
ip route add 8.9.4.5 via 192.168.0.1 dev eth0
但我的问题太简单了!我无法更改网关地址和网络ids。我只需要使用两个来自Linux机器的地址相同的互联网网关,内核3.2.0和更高版本。
我想更换我的linux网关盒到Mikrotik。但我从未找到如何用mikrotik的方式编写这个linux的iproute2命令:
ip route add default via 10.1.1.1 table browser
ip route add 10.1.2.0/24 via 10.1.1.2 table browser
ip rule add prio 100 from 10.1.6.2 lookup browser
有人可以引导我如何创建一个新的路由表,而不是使用主路由?
我使用以下命令将Linux盒配置为开关模式:
ip link add name switch type bridge
ifconfig switch 192.168.1.2
ip link set switch up
ip link set swp0 master switch && ip link set swp0 up
ip link set swp1 master switch && ip link set swp1 up
ip link set swp2 master switch && ip link set swp2 up
ip li
我有一个带有子链接的导航菜单。当我将鼠标放在有子链接的链接上时,当我将鼠标移到链接上时,它会闪烁。 对我的问题的说明: https://i.ibb.co/g684pXt/illustr.gif function myFunction(i) {
document.getElementById("myDropdown" + i).classList.toggle("show");
}
/* When the user clicks on the button,
toggle between hiding and showing the dropdown