我刚开始使用bsd系统。通常,在基于linux的系统中,我会添加这样的路由:
# eth0 ip address
ip a add 10.100.1.2 dev eth0
# gw is accessible via eth0 interface
ip route add 10.100.2.1 dev eth0
# default route via 10.100.2.1
ip route add default via 10.100.2.1 dev eth0
我不明白我的openbsd命令有什么问题。它是新安装的,完全没有定制的托架。
# that's one's ok
在我的论文中,我使用协议ARAN创建了一个Manet。要安装协议,我使用的是,但是第一步是创建trace_route,我收到了以下错误:
-linux/module.h: No such file or directory
-linux/procs_Fs: No such file or directory
-linux/skbuff: No such file or directory
我搜索了网页,发现问题在标题中,但我没有找到解决方案.
我正在使用Ubuntu10.04LTS内核2.6.33重新编译
我正在通过工作。
我在下面的步骤中遇到了问题:
$ cd ../../node
$ npm install
$ cd dynamic_codegen/route_guide
$ nodejs ./route_guide_server.js --db_path=route_guide_db.json
它会导致以下错误消息:
throw error;
^
Error: Failed to load gRPC binary module because it was not installed for the current system
Expected directory: node-
我对Linux和Linux上的编程是非常陌生的。我正在尝试在ubuntu上安装OpenAL SDK ...我最好的猜测是,我需要从CVS repo下载OpenAL。我找到了一个教程:
但是,当我尝试运行终端命令时,会发生以下情况:
steven@ubuntu:~$ cvs -d:pserver:guest@opensource.creative.com:/usr/local/cvs-repository login
Logging in to :pserver:guest@opensource.creative.com:2401/usr/local/cvs-repository
CVS pas
我在linux环境中成功地安装了rvm和ruby。当我试图安装轨道时,我将面临以下错误:
$ gem install rails
/home/bathakarai/.rvm/rubies/ruby-1.9.3-p385/bin/gem:4: warning: Insecure world writable dir /home/bathakarai in PATH, mode 040777
ERROR: Could not find a valid gem 'rails' (>= 0) in any repository
ERROR: While executing g
我刚刚在Linux系统上安装了Flexi插件,完全按照运行。
当我导航到代码http://localhost/codeigniter/时,它显示的是花哨的演示页面。但是,当我单击顶部菜单中的“演示”链接时,它的显示页面没有找到错误。
Not Found
The requested URL /auth_lite/demo was not found on this server.
Apache/2.2.22 (Ubuntu) Server at localhost Port 80
需要配置我的routes.php吗?在安装指南中,它只对默认控制器进行编辑,如下面的$route['de
我试着在迷你网络上使用MPLS,我能够安装iproute2,当我尝试这样的东西时
ip route add 192.168.10.187/32 encap mpls 101 via 10.10.0.187
我知道错误:
Error: either "to" is duplicate, or "encap" is a garbage.
同样,当我尝试这样的东西
ip -f mpls route add 101 dev lo
我知道错误:
RTNETLINK answers: Operation not supported
我检查了我的配置文件并设置了所有这些,但没
我收到以下错误:
(virtualenv)[chirdeep@fedora-desktop ~]$ python programs/python/myrestapi.py
Traceback (most recent call last):
File "programs/python/myrestapi.py", line 2, in <module>
import bottle
File "/home/chirdeep/programs/python/bottle.py", line 1, in <module>
from bo
我正在创建一个基于AWS的DR安装和运行手册。
我没有任何建立博士设置的经验,所以如果有经验的退伍军人能指导我通过它,那将是非常有帮助的。
我们的设置:
RDS MYSQL Aurora DB
ElastiCache
Ubuntu 16.04 Linux EC2 instances
Static files stored in S3
Route 53- Total of 250 record sets.
Application Load balancer
所有的东西都在同一个VPC下。我们正在尝试建立一个PilotLight博士系统。
我必须配置NAT,并在连接到Linux盒的两个网关之间手动拆分internet流量。
如果每个网关都有特定的IP地址,则没有问题。我可以通过iproute2做到这一点:
ip route add default via 192.168.1.1 dev eth1
ip route add 2.3.4.5 via 192.168.0.1 dev eth0
ip route add 8.9.4.5 via 192.168.0.1 dev eth0
但我的问题太简单了!我无法更改网关地址和网络ids。我只需要使用两个来自Linux机器的地址相同的互联网网关,内核3.2.0和更高版本。
我想更换我的linux网关盒到Mikrotik。但我从未找到如何用mikrotik的方式编写这个linux的iproute2命令:
ip route add default via 10.1.1.1 table browser
ip route add 10.1.2.0/24 via 10.1.1.2 table browser
ip rule add prio 100 from 10.1.6.2 lookup browser
有人可以引导我如何创建一个新的路由表,而不是使用主路由?
我使用以下命令将Linux盒配置为开关模式:
ip link add name switch type bridge
ifconfig switch 192.168.1.2
ip link set switch up
ip link set swp0 master switch && ip link set swp0 up
ip link set swp1 master switch && ip link set swp1 up
ip link set swp2 master switch && ip link set swp2 up
ip li
我有一个带有子链接的导航菜单。当我将鼠标放在有子链接的链接上时,当我将鼠标移到链接上时,它会闪烁。 对我的问题的说明: https://i.ibb.co/g684pXt/illustr.gif function myFunction(i) {
document.getElementById("myDropdown" + i).classList.toggle("show");
}
/* When the user clicks on the button,
toggle between hiding and showing the dropdown