我运行了16.04,因为它是作为一个新的安装,并在大约一个月前升级到18.04使用官方的升级机制。我在syslog中注意到了这一点:
Sep 27 17:40:36 yavin systemd[1]: Starting Daemon for power management...
Sep 27 17:40:36 yavin upowerd[836]: /usr/lib/upower/upowerd: error while loading shared libraries: libssl.so.1.0.2: cannot open shared object fil
e: No such fi
我在Ubuntu15.10上遇到了Apache的问题。当我运行sudo service apache2 restart时
出现以下错误:
Job for apache2.service failed because the control process exited with error code. See "systemctl status apache2.service" and "journalctl -xe" for details.
所以我运行systemctl status apache2.service
apache2.service - LSB
我注意到Ubuntu20.04上没有电池指示灯,更新后从18.04。"acpi“工作在命令行,而不是"upower”。
$ upower
(upower:67208): UPower-WARNING **: 18:28:34.153: Cannot connect to upowerd: Error calling StartServiceByName for org.freedesktop.UPower: Failed to activate service 'org.freedesktop.UPower': timed out (service_start_
我在MacBook Pro上运行Ubuntu18.04,并听到磁盘卸载的“敲门声”,然后立即定期重新安装,当没有物理设备被改变时。我已经在“设置”菜单中关闭了系统声音效果,但这似乎不会影响磁盘挂载声音。我如何禁用这个声音效果?
编辑:当声音发生时,我检查了syslog,发现了一个usb断开/连接事件。
May 26 19:03:48 Midgard kernel: [36412.160010] usb 2-4: USB disconnect, device number 29
May 26 19:03:48 Midgard kernel: [36412.160167] xhci_hcd 000
电池指示器图标在顶部面板中不可见。我和GNOME一起运行Fedora 30。我试着重新启动upower,但是失败了。
$ sudo systemctl restart upower
Job for upower.service failed because the control process exited with error code.
See "systemctl status upower.service" and "journalctl -xe" for details.
$ systemctl status upower.service
● u
从16.04升级到18.04后,摄像头不再工作
用于照相机的输出:
Bus 001 Device 006: ID 05a9:a511 OmniVision Technologies, Inc. OV511+ Webcam
命令:
journalctl --follow
当网络摄像头插入时,产生以下内容:
kernel: usb 1-1.4: new full-speed USB device number 6 using ehci-pci
kernel: usb 1-1.4: New USB device found, idVendor=05a9, idProduct=a511
kernel:
在仿生18.04上,每次我使用USB驱动器(棒或2.5“HD)时,右击图标,选择”安全删除驱动器“。图标消失,驱动器断电,我拔掉插头。相当晚(我还没有计时,但至少有5-10分钟左右),我会弹出一个弹出,抱怨”无法停止驱动器-超时“。
在/var/log/messages中,我看到以下内容:
May 26 13:01:48 dellfvw udisksd[1043]: Powered off /dev/sdb - successfully wrote to sysfs path /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/remove
May 26
我在Ubuntu20.04上使用i3wm,没有任何DE,所以不应该干扰函数。默认的logind.conf使系统在关闭盖子后挂起。我要它,以便关闭盖子做任何事2分钟后,它暂停系统。我该怎么做?
按照注释中的请求添加systemd-inhibit --list的输出
WHO UID USER PID COMM WHAT WHY MODE
ModemManager 0 roo
在一个ubuntu终端上检查你的电池电量有很多在线教程。最常见的解决方案似乎是使用upower。但是,当我在我的Surface上的Windows10中的when中运行upower时,我得到了以下结果:
user@sp4-2637:~/the_thing$ sudo upower
(upower:665): UPower-WARNING **: Cannot connect to upowerd: Could not connect: No such file or directory
与sudo priviliges一起运行会产生同样的结果。
在我的笔记本电脑上运行本机ubuntu,我可以像
我有一个USB,由于某种原因我无法访问它。在fdisk -l上,我没有看到USB,也没有出现在斑纹或任何地方.
我不记得usb的格式了。
内核版本:4.15.0-50-通用Linux薄荷19.1泰萨
苏斯b
Bus 003 Device 047: ID 0c76:0005 JMTek, LLC. Transcend Flash disk
/var/log/syslog
kernel: [105006.175480] usb 3-1: new high-speed USB device number 45 using xhci_hcd
kernel: [105006.393886] usb 3-
我有Debian 6,我也在Ubuntu下见过这个(我不记得我是如何修复它的)。
我可以冬眠,但是当我打开系统冷启动时(它不会恢复上一次会话)。
注意暂停工作很好。查看了/var/log/pm-suspend.log显示的每个suspend suspend块的resume suspend块,但是hibernate hibernate' is not followed by恢复了hibernate`‘(我认为这是预期的结果)。
安装了软件包hibernate,就像当时认为可能需要的那样,但是没有什么区别。
我刚开始寻找,却找不到/usr/lib/hal/scripts/linux/hal
我在易趣上找到了一把乙烯基切割机,然后买了下来。
然后我偶然发现了这个视频:https://www.youtube.com/watch?v=3tZXsUGEJ-E,它证明了在linux上使用这种设备是可能的。我已经安装了墨迹,但无法完全弄清楚如何连接到设备。
lsusb -v为设备提供了以下内容:
Bus 003 Device 009: ID 0483:5750 STMicroelectronics
Couldn't open device, some information will be missing
Device Descriptor:
bLength
我在Ubuntu18.04中的一个无线游戏垫控制器有一些问题。直到最近还很正常。jstest和evtest似乎都检测到了它的输入,但是按钮映射是不正确的,并且游戏/仿真器似乎没有识别它。
lsusb返回以下内容:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus
我正在使用EP- am 1661 WiFi和蓝牙适配器。根据他们的网站,驱动程序只支持内核版本2.6 .I,并试图在ubuntu18.04上安装驱动程序,内核版本为5.0.0.29-泛型
当我运行命令时
sudo make install -s
我犯了个错误
rtk_coex.c:2532:2 :error: implicit declaration of function 'init_timer'; did you mean 'init_timers'? [-Werror=implicit-function-declaration]
init_time
在live会话中,我尝试安装Lubuntu,双击桌面上的安装按钮。在这里,CD开始运行,但随后停止运行,什么也没有发生。
接下来,我重新启动并尝试使用forcepae直接从启动菜单屏幕安装Lubuntu。过了一会儿,我收到以下错误消息:
The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.
点击Enter会让我进入桌面。我应该搜索哪些错误?又是如何做到的
我在最新的KDE Neon上使用了KDE 5.15.3,并回顾了Linux 19 +一个较旧版本的KDE (不记得是哪个版本)出现的问题。
断断续续地,启动后,我没有电池小部件在我的任务栏(所以我看不出还剩多少电池)。当这种情况发生时,我试图打开节能对话框,它告诉我
Power management configuration module could not be loaded.
The Power Management Service appears not to be running.
This can be solved by starting or scheduling it