我正在尝试使用在戴尔7490笔记本上运行Ubuntu22.10的Sabrent HB-BU10。
由于没有插入USB,系统用lsusb -v报告了以下内部集线器:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
由于只有电源集线器(没有连接的设备)插入了系统,lsusb -v报告了两个新的集线器(显然是USB2和USB3都是枚举的)。我从长清单中插入了几行代码:
Bus 002 Device
我正在做一个在linux中使用大规模存储设备的项目。我正在尝试编写一个应用程序,它将列出所有连接的usb海量存储设备,并在插入新的海量存储设备时发出通知。为此,我正在使用libudev。我使用了"“中的代码。我在这里做了修改
/* Create a list of the devices in the 'block' subsystem. */
enumerate = udev_enumerate_new(udev);
udev_enumerate_add_match_subsystem(enumerate, "block");
udev
我在一台新的服务器机器上安装了ubuntu服务器14.04。我正计划获得一个外部usb硬盘,用于数据备份。我的主板是英特尔s1200V3RPS,显示在英特尔页USB3.0与4个端口。然而,我在我的机器上有6个端口,当我对它执行lsusb时,我得到以下输出
naveen@ubserver:~/ordcode$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:80
我试图解决一个问题,在一台服务器上,我的USB自动机,而在另一台服务器上,它不是。比较这两个实例的日志,我试图理解每一行意味着什么。
自动USB消息日志:
May 9 18:10:40 kernel: usb 2-1.4: new high-speed USB device number 12 using ehci-pci
May 9 18:10:40 kernel: usb 2-1.4: New USB device found, idVendor=8564, idProduct=1000
May 9 18:10:40 kernel: usb 2-1.4: New USB devi
我使用的是USB <->串行盒,并希望为串行端口提供一个自定义的符号链接。
根据udevadm的输出,我知道每个端口有一个不同的内核值:
KERNELS=="1-3:1.0" (this is labeled as port 1 on the box)
KERNELS=="1-3:1.1" (port 2)
KERNELS=="1-3:1.2" (port 3)
KERNELS=="1-3:1.3" (port 4)
我尝试了以下规则:
ATTRS{idVendor}=="0403", ATTRS{id
adb devices -l
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
当我执行它的时候,我就像
padmakumar@padmakumar-desktop:~$ adb devices -l
List of devices attached
Medfield14ABxxxx device usb:2-1.5
Ztedfield14Axxxx
我的工作是把网具AXE3000 Wi 6适配器连接到一个Ubuntu22.10系统。这个特定适配器这里的背景。
适配器工作时,直接插入主机计算机(戴尔7490)。但是,当插入USB3.0集线器时,适配器在ip a中不可用。
下面是lsusb的输出,检测到两个适配器:
lsusb
Bus 002 Device 008: ID 0846:9060 NetGear, Inc. Wireless_Device
Bus 002 Device 006: ID 0846:9060 NetGear, Inc. Wireless_Device
Bus 002 De
我有一个基于SiLabs CP2101芯片组的USB到串行适配器。我正在尝试在Debian5.0Lenny (armel架构)中使用它。
我似乎能够获得正确的内核模块来识别适配器,但它不会创建/dev/ttyUSB0。
我运行了modprobe usbserial和modprobe cp2101,然后连接了设备,得到了来自dmesg的以下输出:
usb 2-1: new full speed USB device using mv5182_ehci and address 8
usb 2-1: configuration #1 chosen from 1 choice
cp2101 2-1:1