最近我的一个驱动器在我的RAID中坏了,我正在用一个新的驱动器替换。我使用这个答案来镜像旧驱动器上的分区以进行重新同步。但我担心的是输出。我的驱动器是4k扇区,我第一次做错什么了吗?
Checking that no-one is using this disk right now ...
OK
Warning: partition 1 does not end at a cylinder boundary
Warning: partition 2 does not start at a cylinder boundary
Warning: partition 2 does not end a
我使用的是Oracle Linux 7.6,它是一个基于RHEL7.6的发行版。在RHEL7.6或其他基于RHEL7.6的发行版上,以下测试应该是相同的。
我在Windows10上的VMware工作站上运行OracleLinux7.6服务器,我想要做的是在不重新启动Linux服务器的情况下向Linux来宾虚拟机添加一个磁盘。我搜索了一下,发现了这个页面:https://rahsupport.wordpress.com/2017/08/10/vmware-add-disk-to-linux-without-rebooting-the-vm/。基本上,它所做的是:
将磁盘从VMware工作站添加到
我有一台新的office PC,它安装了AltLinuxver9。
我想安装Ubuntu,但是Ubuntu的安装程序Ver18.04 (uefi)没有检测到alt。
以下是磁盘(1个磁盘,gpt)的样子:
/dev/sda a
/dev/sda1 efi
/dev/sda2 swap (swap for alt linux)
/dev/sda3 ext4 (alt linux installed here)
/dev/sda4 ext4 (it looks like home for altlinux)
/dex/sda5 empty ext4 partition
我应该如何手动安装Ubunt
我在同一个磁盘上安装了Linux和Windows。最近,我决定改用不同的Linux发行版。从那以后,格鲁布失败了,掉进了救援队的外壳。我在网上发现,我可以使用以下命令启动:
set prefix=(hd0,gpt6)/boot/grub
set root=(hd0,gpt6)
insmod linux
insmod normal
normal
输入normal命令后,我将进入通常的Grub,在那里我可以选择要引导的操作系统。我试着重新安装Grub,但是实际的问题似乎是我有两个不同的Grub安装。
这些是我的分区:
Device Start End Sectors
我使用的是ubuntu20.04,我想要创建新的分区磁盘,正好有500 MB。但是,fdisk将其调整为512 can,是否有任何方法可以创建准确的500 it磁盘大小?
📷
ric@Eric:~/Downloads$ sudo fdisk /dev/sda
Welcome to fdisk (util-linux 2.34).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help)
所有人。在升级到natty之后,我的系统在第一次尝试时就开始拒绝引导。更多细节:在grub菜单上,我试图启动ubuntu,这会导致错误:
error: file not found
error: you need to load the kernel first
push any key to proceed
然后,grub菜单再次出现。在尝试启动错误信息之后,不会出现错误消息,并且系统会正常启动。每次都是这样。
fdisk -l输出:
/dev/sda1 * 1 10199 81922016+ 7 HPFS/NTFS
/dev/sda2
我已经安装了操作系统:Ubuntu14.04LTS和MSWindows7Pro。
Linux系统:
1)系统分区:50,30免费
2)家庭分区100 GB,60 GB免费
3)交换分区8GB
Windows 7:
1)据我所知,只有一个系统分区--大约160 GB。
下面是我的磁盘的样子:
Disk / dev / sda: 320.1 GB, 320,072,933,376 bytes
heads: 255, sectors / track 63, Cylinders: 38913, all in all sectors: 625142448
Unit = sectors, or 1 *
在安全地删除或弹出它之后,我想重新安装它而不拔掉它,然后再重新插入它。有什么建议吗?
PS
在使用了弹出后,所有usb内存都超出了fdisk命令范围,我不认为这很容易
` Device Boot Start End Blocks Id System
/dev/sda1 109473792 1953525167 922025688 83 Linux
/dev/sda3 2050048 99706297 48828125 83 Linux
/dev/sda4 9970892
不小心被编辑或删除了,我不知道。请有人帮我解决这个问题。我是Ubuntu的新手。
General error mounting filesystem.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and reboot the system
更多信息:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 1606
我在Ubuntu的双引导下安装了Windows来玩Skyrim,这最终导致了GRUB的崩溃。在尝试了大量的东西来修复它(包括使用引导修复)之后,我将Ubuntu安装在一个新的分区中,与旧的Ubuntu和XP并行。之后,GRUB又起作用了,我现在可以访问我以前的Ubuntu和XP了,但是现在我有了两个Ubuntus,我想放弃新的Ubuntus。我怎么才能做到这一点而又不破坏食物呢?
以下是sudo fdisk -l的结果:
Device Boot Start End Blocks Id System
/dev/sda1 *
在今天的更新之后,2011年11月22日,Ubuntu选项从我的双分区GRUB11.10中消失。
一些fdisk -l:
Device Boot System
/dev/sda1 * HPFS/NTFS/exFAT
/dev/sda2 Extended
/dev/sda5 Linux
/dev/sda6 Linux swap / Solaris
Device Boot ID System
/dev/sdb1 * c W95 FAT32 (LBA)
我还运行了这个:
grub-probe -t device /boo
我正在构建从/media/src_prog/linux-3.5/到/media/sda5_k/的内核(3.5)。我经历了以下步骤:
make O=/media/sda5_k/ menuconfig
make -j2 O=/media/sda5_k/
make O=/media/sda5_k/ modules_install
谈到make O=/media/sda5_k/ install,我得到的只有:
[root@localhost linux-3.5]# make O=/media/sda5_k/ install
sh /media/src_prog/linux-3.5/arch/x86/b
当我试图在/dev/sda5窗口上安装windows xp时,告诉我它不能在/dev/sda1上写入
我怎样才能在/dev/sda5上安装windows而不搞砸一些事情,或者不可能在这个分区上安装windows?
cfdisk (util-linux-ng 2.17.2)
Disk Drive: /dev/sda
Size: 250059350016 bytes, 250.0 GB
Heads: 240
Sectors per Track: 63
Cylinders: 32301
Name Flags Part Type FS Type
我安装了win 7和ubuntu 11.04。我想把我的机器升级到11.10。
一切都很好,它安装了所有的升级,并要求我重新启动。
重新启动后,我只获得了一次登录屏幕。在那之后只有一个空白的屏幕。所以我手动重新启动它。
现在,每当我试图重新启动时,我都会得到
Busybox v1.18.4 (Ubuntu 1:1.18.4-2ubuntu2) built-in shell(ash)
Enter help for a list of built-in commands.
(initramfs)
下面是我启动时会发生的情况:
生物负荷
Grub显示加载选项:UbuntuwithLinux3.0