我目前正在使用网络电缆连接到我的路由器。我有一个无线路由器,但我的桌面没有无线连接(WiFi)。所以我必须使用WiFi适配器。我使用USB类型的适配器。但是当我把它插到LED上的时候,它似乎就死了。但它适用于Windows。
那么,我要做什么才能使WiFi连接到我的路由器?
更新:
输出lsusb命令。
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 006: ID 07d1:3a09 D-Link System DWA-160 802.11abgn Xtreme N
我已经在Arch安装中在/etc/netctl/tq84-wifi中配置了一个wifi连接,并且能够用sudo netctl start tq84-wifi手动启动它。
现在,当我启动Linux时,我想让我的安装自动启动wifi连接。我尝试了sudo netctl-auto switch-to tq84-wifi,但是这个命令告诉我Profile 'tq84-wifi' does not exist or is not available。
那么,我该做什么呢?
我有一个Linux (3.14.36)嵌入式板作为一个WiFi AP。
WiFi芯片组不支持监视模式。
我的笔记本电脑(客户端)通过WiFi连接到这个板上。
WiFi AP充当到另一台计算机的网络桥,不向客户端提供IP地址( WiFi AP只有客户端的MAC地址)
我希望监视连接WiFi AP <->客户端的信号强度,并能够触发信号强度值的“刷新”。
做:iw dev wlan0 station dump给了我:
Station xx:xx:xx:xx:xx:xx (on wlan0)
inactive time: 123820 ms // <
当我按照自述文件中的指令操作时,我得到了以下错误:
/home/glenn/SM8811CU-V2.0/linux/WiFi/RTL8821CU_WiFi_linux_v5.2.5.1_22211_COEX20170310-1212.20170517/driver/rtl8821CU_WiFi_linux_v5.2.5.1_22211.20170517_COEX20170310-1212/include/osdep_service_linux.h:295:8: error: ‘_timer’ {aka ‘struct timer_list’} has no member named ‘data