我正在用思科2511路由器和外部调制解调器配置拨号。终端是拨号服务器,它将创建ppp连接.我使用本指南作为参考,但它只适用于async1端口,当我切换到async2和ping服务器时,路由器不会拨服务器。
配置:客户端computer==(以太网)router==(异步端口)调制解调器??pstn??调制解调器==拨号服务器(S)
有人能帮我解决这件事吗?一个详细的答案或文件将帮助我很大,因为我是新的这件事。
更新:sho run的结果
!
version 11.2
no service password-encryption
no service udp-small-servers
no s
我的命令是ppp-ublox-on激活GSM ppp0。在间隔25分钟之后,PPP0断开.and,我需要再次手动运行命令ppp-ublox -on。我在用繁忙的盒子。ppp-ublox-on脚本如下所示
#!/bin/sh
#
# Script to initiate a ppp connection. This is the first part of the
# pair of scripts. This is not a secure pair of scripts as the codes
# are visible with the 'ps' command. Ho
我正在与wv拨号(PPP)建立网络连接,并且希望在它建立之后将它指定为传出的网络接口。
连接是由bash脚本建立的,在建立连接之后,我将要求它更改出站接口。
当前的网络接口文件如下所示:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo eth0
iface lo inet loopba
我有一个思科881-W路由器与思科IOS C880版本12.4(24)T5.
因为某种原因,我似乎无法在拨号程序上获得IP。我可能做错了什么蠢事。
Interface IP-Address OK? Method Status Protocol
Dialer1 unassigned YES NVRAM up up
FastEthernet0 unassigned YES unset up