请告诉我最好的情况下包装SPS的PPS到PES包装。
我有原始的h264流,比如:
SPS PPS IDR P P ... P SPS PPS IDR P...
如何将其打包到PES中?我打包成这样:
[PES with PTS] SPS PPS IDR [PES with PTS] P [PES with PTS] ...
或者我应该
[PES with PTS] SPS [PES with PTS] PPS [PES with PTS] ... ?
谢谢
我有一个GPS,PPS在我的非联网嵌入式Linux板上安装了GPIO,运行2.6.37。
我试图保持系统时钟尽可能准确(最好优于20 as的准确性)。我已经从串口GPS设定了几个millis的时间,并希望使用PPS来约束时钟(这是正确的术语吗?)
我已经设置了一个中断来捕捉PPS。
我的中断处理例程类似于:
struct timeval tv;
do_gettimeofday(&tv);
..check that we're really close to a second mark and adjust tv to the nearest second...
do_setti
我正在尝试将usb转串口驱动程序添加到我的arch linux arm设备中,并且我注意到内核源代码树中已经包含了FTDI驱动程序的源文件,位于:
驱动程序/usb/串口,存在ftdi_sio.c和ftdi_sio.h文件。
当我导航到内核/驱动程序时,到处都找不到ftdi_sio.ko模块。
如何构建ftdi内核模块并将其包含到引导中,以便在我的arch linux arm上具有usb转串口功能?
我正在开发一个linux内核模块,我需要从串口(字符)读取数据。我希望将字符(例如:'D‘、'T’和'-')设置为来自串行端口的条目,并希望阅读这些条目。我花了很长时间尝试使用"inb(0x3f8)“和"termios”,但都没有成功。但是,使用"outb“正确地编写数据,我已经将Ubuntu10.10作为系统安装在我设置的VirtualBox上的VBox配置上的来宾:
activated serial port
port number : COM1 IRQ 4 PORT I/O : 0x3f8
Port/p
我使用从串口到usb的转换器,在Windows中可以打开串口属性并设置一个复选框RS-485,只有在此之后,我才能从设备接收数据。如何在Linux中进行同样的操作?因为默认情况下,我得到的结果与未检查的RS-485在Windows中相同:
Port name - /dev/ttyACM0; Method name - readBytes(); Serial port operation timeout (500 ms).
execute try 2 error: I/O exception - failed to read
我的设备是:
Bus 001 Device 008: ID 04e2:
我在联想的Z510上运行Ubuntu16.10,gt为7.4亿。使用任何NVidia驱动程序时,当我试图从挂起的屏幕中醒来时,屏幕是黑色的,并显示了一个错误:
[ 1046.061495] [drm:wait_panel_status [i915]] *ERROR* PPS state mismatch
[ 1047.081663] [drm:hsw_write_dcomp [i915]] *ERROR* Failed to write to D_COMP
[ 1047.369023] NVRM: Xid (PCI:0000:07:00): 70, GPU has fallen off the
我有一个飞思卡尔iMX6 SMARC模块和载波板。它来自UbuntuLinaro12.04LTS(内核3.0.35)的制造商。我需要大量的串口,所以我得到了带有Exar XR17V358芯片组的Syba 8端口XR17V358卡。当我试图从Exar网站安装驱动程序时,我得到了一个错误:
make -C /lib/modules/'uname -r'/build SUBDIRS=/home/linaro/Desktop/exar modules
make: *** /lib/modules/3.0.35/build: No such file of directory. Stop