我正在尝试在虚拟机中使用oprofile作为分析工具。但是,如果我这样做了
operf
我得到以下错误:
Your kernel's Performance Events Subsystem does not support your processor type.
Please use the opcontrol command instead of operf.
因此,我尝试了opcontrol。我以root用户身份执行了以下操作
opcontrol --deinit
rm /root/.oprofile/daemonrc
opcontrol --init
opcontrol
我正在Ubuntu20.04LTS主机上运行VirtualBox VM6.1。
客户操作系统是Windows 10。
启动计算机并登录到我的用户帐户后,在桌面顶部弹出一个灰色窗口,上面写着:VBoxClient: The virtualbox kernel service is not running...
请注意,这没有启动VirtualBox;这条消息几乎是在登录到我的桌面之后立即弹出的。
不过,我可以启动VirtualBox并运行我的客户操作系统。
自从安装Ubuntu以来,我已经对它进行了多次更新,并且我已经重新安装了VB来更新它。
是什么导致这条消息出现?
我在终点站运行sudo g
这个问题的动机是,我不再能够在我的红帽机器上创建一个功能良好的chroot。大约一年前,许多红帽更新了我能够做到的。
sudo debootstrap --arch amd64 trusty trusty http://archive.ubuntu.com/ubuntu
sudo chroot trusty
在以下方面的成果:
groups: cannot find name for group ID 0
groups: cannot find name for group ID 1027
I have no name!@wsdev66:/#
这是一种意想不到的行为,也是一种非功能性色度。预期
对于无法启动虚拟机的结果,我有一个问题。
著名的内核驱动程序未安装(rc=-1908)
我试过了
apt-get install linux-headers-4.9.0-kali4-amd64
linux-headers-4.9.0-kali4-amd64 is already the newest version (4.9.25-1kali1)
在安装vbox期间,我正在读取以下错误消息:
Building for 4.9.0-kali3-amd64 4.9.0-kali4-amd64 Module build for kernel 4.9.0-kali3-amd64 was skipped
我使用netlink套接字与linux内核通信用户python代码,我可以从用户正确地发送消息到内核,但不能从内核获得响应。它显示:“向用户发送bak时出错。”在我的内核代码中
我尝试了所有的方法来获得响应消息:recv,recvfrom recvmsg,然后我的目的是解压它以获得具有以下格式的响应的有效负载: response_message = header +有效负载,但是用户总是无法获得响应。我在执行用户python代码时得到了这样的信息:
pid of sock : 1
seq number of sock : 0
pid of the message send to kernel:
在将FTDI设备连接到USB端口后,FT_OpenEx()返回一个错误代码2,即FT_DEVICE_NOT_FOUND。但是,在终端中运行"lsusb“时,会出现FTDI设备。如果设备是由lsusb列出的,是什么导致FT_Open_Ex()返回FT_DEVICE_NOT_FOUND?可能的问题和解决办法是什么?
lsusb的产出:
Bus 001 Device 003: ID 0bda:5776 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: I