我在运行Ubuntu10.4的笔记本电脑上损坏了分区表。
在分区表损坏之前,我有以下分区:2个主分区:第一个-- NTFS第二个扩展--在第二个扩展中构建的4个逻辑分区:第一个NTFS (68Gib)、第二个Linux (19个Gib)、第三个交换(1.4Gib)、第四个Linux (24个Gib)
这些分区的物理顺序如下:(第4 Linux )-(第1 NTFS )-(第2 Linux )-(第3交换)分区的逻辑顺序不同:(第1 NTFS )-(第2 Linux )-(第3交换)(第4 Linux )
NTFS分区很大,位于两个Linux分区之间,这两个分区都没有足够的空间安装Oracle
我使用的是服务器,有人在服务器上添加了硬盘。我在努力让这件事起作用。我是一个普通的Linux用户(但以前从未做过这件事)。
我已经在谷歌上搜索,并试图按照指示,并在此刻感到困惑。
我使用cfdisk创建了一个新分区。
Device Boot Start End Blocks Id System
/dev/sda1 * 2 501 512000 83 Linux
/dev/sda2 502 30720 30944256 8e Linux LVM
关于这里发生了什么,我有个问题。这里的“一个新DOS磁盘标签”是否意味着已经创建了DOS分区表?换句话说,默认情况下已经创建了DOS分区表,当选项"g“创建GPT分区表时,该表就会被删除?
primus@ubu2104:~$ sudo fdisk /dev/sdd
Welcome to fdisk (util-linux 2.36.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does
我的Ubuntu操作系统不识别任何外部驱动器或设备。这是在我安装Windows之后开始的。当我运行GParted时,它显示“未分配的465.76 GiB”。我运行了"sudo fdisk -l -u /dev/sda“,这就是我得到的-
Device Boot Start End Blocks Id System
/dev/sda1 4001790 108857343 52427777 5 Extended
Partition 1 does not start on physical sector bou
我有较旧的VM (Centos7),其中有许多磁盘。现在是36 vmdk (22 it )。我希望将一个虚拟磁盘扩展到2400 on,并为LVM (磁盘上的第3层)创建新的分区。但是在我创建partion之后,我看到这个操作比正常的要慢。我查了一下syslog,这里有:
Mar 22 15:47:27 host kernel: sd 4:0:4:0: [sdai] Very big device. Trying to use READ CAPACITY(16).
Mar 22 15:47:27 host kernel: sd 4:0:4:0: [sdai] 5033164800
当我在Ubuntu14.04机器上运行sfdisk -l时,它返回以下内容:
Disk /dev/xvda: 36473 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/xvda1 0+ 522 523- 4200966 83 Linux
/de
我有一堆磁盘,其中的分区表非常相似(几乎相同)
我需要“擦除”这些磁盘,这样当创建新的分区表时,删除分区表之前存在的任何卷都不会试图重新挂载。
所以简而言之
t0: create partition table, format volumes with ext4
t1: delete partition table
t2: create same partition table as in t0
t3: GOAL: volumes created in t0 are not mounted, recovery is not attempted
我希望在t3中没有
我有一个新的1TB笔记本电脑驱动器,我想克隆一个现有的驱动器。问题是,我想重新排序和调整现有分区的大小。
驱动器的现有分区表是
Device Boot Start End Blocks Id System
/dev/sda1 2048 24578047 12288000 7 HPFS/NTFS/exFAT 11GB (former recovery partition of a Windows drive)
/dev/sda2 * 24578048 216989695 9620582
我最近买了一个3.5英寸东芝硬盘,并使用SATA的USB接口。当我插入硬盘时,它不会出现在通常的位置,但是当我输入lsusb时,它会给我
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001:
Xubuntu 14.04.3,USB闪存4GB。在使用了在LinuxMint17.2 MATE中编写闪存的标准工具之后,我安装了Xubuntu,但是当我决定格式化闪存驱动器时,我得到了如下信息:
警告: /dev/sdb包含GPT签名,指示它有一个GPT表。然而,它没有一个有效的假msdos分区表,因为它应该。也许它被破坏了--可能是因为一个不理解GPT分区表的程序。或者您删除了GPT表,现在正在使用msdos分区表。这是GPT分区表吗?
遵循这些指示后:
Open a Terminal and run sudo gdisk /dev/sda
It is likely that both M
这是我的磁盘分区:
$ sudo fdisk /dev/sda
Welcome to fdisk (util-linux 2.33.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sda: 186.3 GiB, 200049647616 bytes, 390721968 sectors
Disk model: TOSHIBA MK2035GS
我有3个分区(linux、extended ),我需要将我的活动分区(linux)扩展到这些分区之后可用的空间。
更多信息:
#fdisk /dev/vda
Welcome to fdisk (util-linux 2.29.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/vda: 164 GiB, 176093659136 bytes, 3
基本上,我在Linux中乱搞,我用wipefs从分区中删除了文件系统,然后决定删除这个分区(/dev/sda2 2),所以我继续拆分并删除了它。
在此之后,我去了fdisk,并再次创建了它。然后,我使用sudo、-t、ext4 /dev/sda2 2向这个分区添加了一个文件系统,这在分区上创建了一个etx4文件系统。
然后,通过输入sudo fdisk /dev/sda2 2,我再次进入fdisk,然后出现了一条红色文本的消息,即:
Welcome to fdisk (util-linux 2.29.2).
Changes will remain in memory only, until y