我有下面的python代码,用于确定Linux /team状态。--这段代码工作得很好,。我不擅长调整输出格式,因此遇到了一些小问题。
我想把印刷格式变成一定的格式,希望能对此有所帮助。
下面是代码练习:
#!/usr/bin/python
# Using below file to process the data
# cat /proc/net/bonding/bond0
import sys
import re
def usage():
print '''USAGE: %s [options] [bond_interface]
Options
我已经启用了Linux主动备份模式绑定。每个接口都是一个千兆位接口,但键接口似乎以100兆比特的速度结束:
bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full.
...
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
...
bonding: bond0: backup interface eth1 is now
有一个带有不可中断内核5.4.17-2136.304.4.1.el7uek.x86_64的Oracle 7系统(这是最近的类似于RHEL7 7的系统,它通常使用基于3.10的内核)。
网络接口有几个地址配置为别名(我知道古代ifconfig只需要别名,但仍然需要);有些is是历史的,但不是所有的,系统仍然需要有几个地址:
root@bccdb:network-scripts# ip addr show dev bond0.610
15: bond0.610@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
我试图在我的bond0中添加一个接口,但是我总是会遇到错误。
sudo ip link set dev eth0 master bond0
RTNETLINK answers: Operation not permitted
我已经和sudo一起尝试过了,而根用户也没有成功。我的命令是错的。我从这里得到的:
https://github.com/ebiken/doc-network/wiki/Linux-iproute2-:-ip-link-bridge-operations
我有一个Linux服务器,它有三个连接到交换机的NIC (一个NIC是管理端,两个NIC是LACP连接)。另外,我需要使用VLAN (167),因为交换机是用它配置的。
华为交换机(管理):
interface GigabitEthernet0/0/14
description #### MGMT ####
port link-type access
port default vlan 166
华为交换机(键合/LACP):
interface Eth-Trunk10
description #### Server ####
port link-type trunk
port trunk al
我使用iprouter2工具创建了一个vxlan隧道。该命令是:
ip link add vxlan2 type vxlan id 2 group 233.1.1.1 dev bond0 dstport 4789
但是当我重新启动网络或"ifdown bond0“时,vxlan2就消失了。这就是为什么?在CentOS上不会出现这样的问题。
我检查了系统日志,发现了以下信息:
Jul 18 11:38:04 ubuntu-22 named[2184]: configuring command channel from '/etc/bind/rndc.key'
Jul 18
正如标题所说的那样。我想不出有什么办法可以做到。文档中唯一提到的端口是“补丁端口”,它们是一对端口。示例展示了这些补丁端口的使用情况,但还不清楚是否可以以接收配置的方式“定义”这些端口。
基本上,尝试从Proxmox开放vSwitch,示例3创建等效的配置:
# Loopback interface
auto lo
iface lo inet loopback
# Bond eth0 and eth1 together
allow-vmbr0 bond0
iface bond0 inet manual
ovs_bridge vmbr0
ovs_type OVSBond
我在Linux服务器上运行arp -a,这是输出:
[root@trnsrv1 ~]# arp -a
? (10.223.8.82) at 00:50:56:B5:75:08 [ether] on bond0
? (10.223.11.254) at E0:5F:B9:66:A6:00 [ether] on bond0
10.223.11.254 -这是网关
10.223.8.82 -这是另一台服务器,它不是局域网上唯一的服务器。
为什么它出现了,而其他人却没有?
我正在配置vPC端到端直到我的服务器获得更多的带宽,下面是我的场景
📷
我看到了一件奇怪的事情,那就是我在N3k交换机上配置了N3k服务器,然后我将我的Linux服务器配置为链接聚合802.3ad键连接,然后我重新启动了服务器,到目前为止,我可以在/proc/net/bonding/bind0中看到正确的键连接配置,我的服务器也开始了ping,但是我发现我在ping中丢失了数据包,后来我发现交换机上的vpc被关闭了,但是我想知道我是如何得到ping的?
N3k# show vpc 1
vPC status
------------------------------------------
我有一个带有两个NIC的Linux服务器,它连接到一个交换机(以及一个用于管理的NIC ),我想使用它们并在那里使用LACP,但是由于一些未知的原因,这种连接将无法工作/上升。
它还忽略了LACP配置,进入循环模式.
华为交换机配置:
interface Eth-Trunk10
description #### Server ####
port link-type trunk
port trunk allow-pass vlan 167
stp disable
mode lacp
load-balance src-dst-mac
/etc/网络/接口:
auto lo
iface lo ine
我有一个Linux服务器,它有三个连接到交换机的NIC (一个NIC是管理端,两个NIC是LACP连接)。另外,我需要使用VLAN (167),因为交换机是用它配置的。
华为交换机:
interface Eth-Trunk10
description #### Server ####
port link-type trunk
port trunk allow-pass vlan 167
stp disable
mode lacp
load-balance src-dst-mac
现在,这是当前的配置:
/etc/网络/接口:
auto lo
iface lo inet loopback
if
我正在使用核心的java库制作一个2D游戏引擎,然后切换到linux。在我的游戏引擎正常运行之前,但是现在我已经切换到linux了,当我尝试运行代码时,它会抛出一个java.awt.HeadlessException.
我怎么才能解决这个问题?
这是抛出错误的类。但我不确定这会有多大帮助。还有更多的东西。我非常肯定,唯一重要的是我使用awt库来处理密钥事件。
package Platformer;
import java.awt.Dimension;
import javax.swing.JFrame;
public class Game {
public static void
这实际上是第一次在ubuntu上结合。我做了一些关于/etc/网络/接口的配置,但它不起作用;
===============================================================
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface l
以下是ansible文件的相关部分:
- name: "Create bond user"
user:
user: bond
shell: /bin/bash
- name: "Allow bond agent to be run"
sefcontext:
target: "/home/bond/bond_agent"
seuser: system_u
setype: bin_t
state: present
- name: "Create bond agent director