Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages were automatically installed and are no longer required:
libsdl-ttf2.0-0 libunistring0:i386 python-numpy python-pygame deluge-gtk
libsdl-mixer1.2
我已经为特定的软件运行了一个安装脚本,经过几个步骤,我在终端中得到了这个错误;
System name: Linux sorbilene-Veriton-M4610G 3.16.0-30-generic #40~14.04.1-Ubuntu SMP Thu Jan 15 17:43:14 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
System release number translated to 3160
OSID Linux 3160 not found in Makefile.config - remove Makefile and STO
尝试为旧Linux机器配置DNS服务。网络运行良好,ip平接入互联网。但是,如果我点名为ping,ping www.google.com命令就会挂起很长时间,并带来答案:ping: unknown host www.google.com
/etc/network/interfaces:
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
# The loopback network interfa
我试图在Linux啤酒 (基于Arch的发行版)上安装Garuda Linux,但是安装脚本失败了,出现了以下错误:
==> Pouring portable-ruby-2.6.8.x86_64_linux.bottle.tar.gz
Error: Failed to install ruby 2.6.8!
Error: Failed to install Homebrew Portable Ruby and cannot find another Ruby 2.6.8!
If there's no Homebrew Portable Ruby available for you
我的问题是,我有一个硬盘,有一个linux服务器(It fails during booting up process)和一些有价值的文件。( tried almost all solutions on the internet but no luck)
现在我找到了一家公司,它可以发送硬盘进行修复,但是由于我的硬盘上有一些有价值的信息,我需要能够复制硬盘并将副本发送给它们(以防丢失、失败等)。
发现了解决方案,但在linux系统正常工作时(如dd ,Partimage ,Partclone )可以正常工作。
但是,我想知道如何在不启动时获得linux硬盘的第二份副本?有可能吗?(我相信,即使
我正在尝试将我的linux系统与我的微控制器互连。
我已经将DB-9引脚配置为全双工RS485,如下所示:
📷
我把平-7和平-8连接起来了。
我把平-2和平-3连接起来了。
#!/usr/bin/env bash
stty cs8 cstopb parenb -parodd < /dev/ttyO0 #I configure the Serial Port here
while :
do
echo -ne '\x00\x05\x00\x00\xFF\x00\x8D\xEB'>/dev/ttyO0
usleep 10000
done
我必须将大约十亿张图片从jp2格式转换成jpg格式...
我创建了这样的.bat
for /d %%d in (*) do (
for %%f in ("%%~d\*.jp2") do (
convert -limit memory 0 -limit map 0 "%%~ff" -quality 25 "%%~dpf\jpg\%%~nf.jpg"
)
)
但当它转换超过100000个窗口抛出的我的错误与空闲内存等…我怎么做才能让记忆更人性化呢?那么那个图像转换器呢?如果是,则释放内存...也许有办法把这件事和其他事情联系起来呢?
我不是Debian用户,但我需要一个Debian环境来测试我编写的这个内核修补程序,不用说,我花了几天的时间试图弄清楚如何在Debian上构建自定义内核,而且我一直感到沮丧.
我成功地安装了一个自定义内核,但需要更改一个配置选项。在运行make -j5 deb-pkg之后,我得到了以下错误:
dpkg-source: warning: executable mode 0755 of 'debian/linux-headers/usr/src/linux-headers-5.8.0+/scripts/stackdelta' will not be represented in d
我正在尝试从RS-485射频读取器读取串行数据,使用RS-485到USB转换器,找到这里和运行Pyserial的python脚本。
我面临的问题是,当我打印出读取的内容时,在运行Ubuntu18.04.6LTS的Linux上的python终端中会显示正确的数量但不正确的字节。但是,当我在Windows上测试它时,将显示正确的字节。我使用完全相同的代码、相同的硬件(操作系统除外)和相同的读取器设置。
我的Windows代码:
import serial
import time
ser = serial.Serial('COM6', 19200, timeout = 2, par