我是linux新手。我有如下所示的选项卡标记文本文件
A1 title body.1 gene
A1 head head.1 head
A1 trunk trunk.1 trunk
A1 tail tail.1 tail
A2 title body.2 gene
A2 head head.2 head
A2 trunk trunk.2 trunk
A2 tail tail.2 tail
A3 title body.3 gene
A3 head head.3 head
A3 trunk trunk.3 trunk
A4 title title.4 gene
A4 trunk trunk.4 t
我有一个带有以太网连接到计算机的IP摄像头。摄像头位于以太网端口的以太网线上,PC通过无线设备在互联网上运行。我不想与摄像头分享wifi,我有一个NGINx网络服务器,我想发送一个图像流。(只要我能解决网络问题,我就能处理这件事。)
我试过阅读一些教程,如:动态主机配置协议(DHCP)
不过,DHCP服务器在启动时仍然无法启动。
Here is my current configuration:
# dhcpd.conf
# If this DHCP server is the official DHCP server for the local
# network, the authori
我正在用C++编写一个简单的队列和一个模板,但是我的valgrind总是说我在泄漏:
==5427== HEAP SUMMARY:
==5427== in use at exit: 72,704 bytes in 1 blocks
==5427== total heap usage: 5 allocs, 4 frees, 72,768 bytes allocated
==5427==
==5427== 72,704 bytes in 1 blocks are still reachable in loss record 1 of 1
==5427== at 0x4C2911
我正在qt/Linux中用几台有限状态机构建一个嵌入式系统。每个FSM都有自己的事件队列和一个持续运行的线程函数。FSM可以互相发布事件。
显然,在访问时,事件队列应该被锁定和解锁。我应该在FSM,EventQueue中放置互斥,还是让它成为传递给FSM的全局变量?
下面是伪代码:
class EventQueue {
int queue[100];
int head;
int tail;
void postEvent(int event) {
// place the event to cir
假设我有两个bash历史文件,如下所示:
history1.txt 1.txt
1 ls
2 cd foo
...
921 history > history1.txt
history2.txt 2.
154 vim /etc/nginx/nginx.conf
155 service nginx restart
...
1153 history > history2.txt
我知道我可以轻松地编写一个bash脚本,将这两个文件合并在一起,这样生成的文件就包含了第1行到1153行,而没有重复的历史条目.类似于下面的bash脚本:
merge.