我昨天编译了sdk示例,也运行了其中的一些示例。但是今天,我尝试通过发出./deviceQuery命令来运行~/NVIDIA_GPU_Computing_SDK/C/bin/linux/release文件夹中的deviceQuery和,结果显示:
./deviceQuery: error while loading shared libraries: libcudart.so.4: cannot open shared object file: No such file or directory
有谁能帮帮我吗?
我为这个问题找了很多答案。我发现的大多数答案都包括使用rc.local文件禁用相应设备的命令。我尝试过这种方法,但不幸的是,它不起作用。在每一家初创公司,我都有蓝牙和背光。
这是我的/etc/rc.local文件的当前状态:
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
我和Xubuntu一起在另一个分区中安装了Windows 10,然后使用GParted删除了它。尝试执行sudo update-grub,但它不是删除从Windows启动的选项,而是再次添加它。
Found linux image: /boot/vmlinuz-4.4.0-57-generic
Found initrd image: /boot/initrd.img-4.4.0-57-generic
Found linux image: /boot/vmlinuz-4.4.0-53-generic
Found initrd image: /boot/initrd.img-4.4.0-53-ge
当我做一个交互式的rebase时,例如
git rebase -i HEAD~3
rebase交互式编辑器(在我的例子中是vim)打开,让我编辑rebase的提交
pick c843ea2 Set Vim column limit to 80 (OS X)
pick fc32eac Add Bash alias for `pbcopy` (OS X)
....
如果我现在决定中止rebase并使用:q退出vim,那么rebase无论如何都会启动。我在windows上使用的是git版本的1.9.0.msysgit.0。
当然,我可以删除所有的pick行,但如果我重新设置一个更长的历史基址,可能会
我对BCM43142A0蓝牙模块有问题。我已经尝试过这个解决方案:蓝牙Broadcom 43142无法工作。
BT硬件,如耳机,现在可以连接,但继续失去连接(音频停止和恢复与视频脱节)。系统一直在结冰。最后一个条目/var/log/syslog几乎每次都与蓝牙相关。
我有一个usb-dongle,这应该是工作,但需要禁用的内部一个(希望这将结束崩溃)。
lsusb给出:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 048d:8386 Integrated Techno
我是Linux新手,所以请耐心地对待我。
我在跟踪关于phoenixnap.com设置squid的指南。
Squid已成功安装&正在运行。
但是,acl localnet src 192.168.0.15或类似的命令返回以下响应:
Command 'acl' not found, but there are 17 similar ones
我该怎么解决这个问题?
我试图让我的打印机(星Tsp-600)在Ubuntu12.04上工作。我发现这一页建议如下:
# get the cups development headers needed to compile the drivers
sudo apt-get install libcups2-dev libcupsimage2-dev
# download and extract the drivers from Star
wget http://www.starmicronics.com/Download/Drivers/starcupsdrv-3.0.0_Linux.zip
unzip starc
我正在学习一些关于如何使用Mongodb的教程,但它们并没有解释如何关闭CLI。我通常只使用"exit“,但在运行mongod之后,它现在什么也不做,如果我试图通过关闭窗口来离开,我会收到一条消息,说”进程正在会话中运行“。在运行npm run dev之后,我在另一个gitbash窗口中遇到了同样的问题(我认为"dev“部分只是针对我现在所做的事情?)。