在中
我学会了使用Termux中的、apt和pkg来安装和管理软件包。
-$ apt install tree
-$ apt remove tree
-$ pkg install tree
-$ pkg uninstall tree
-$ pkg install mariadb
-$ dpkg, apt-get, etc...
Everything worked fine
在终端中
所以,我只是在Pydroid3终端上尝试了同样的方法。
/storage/emulated/0 $ apt install tree
sh: apt: not found
/storage/emu
所以最近我一直在为ARM编译一个rust项目。它对x86的编译非常完美,但是每当我切换到ARM目标时,它都找不到Openssl安装,我已经安装了pkg-config并且可以正常工作,所以这不是那个错误。我自己也不确定如何成功设置OPENSSL_DIR变量,也不知道在哪里可以找到安装程序。错误将完全粘贴在下面 error: failed to run custom build command for `openssl-sys v0.9.61`
Caused by:
process didn't exit successfully: `/home/bob/yagna/blueb
当我试图安装这个软件包时,我收到了上面的错误。阅读这个问题,,我阅读了安装指南。
下面是这么说的:
During installation, RMySQL looks for the MySQL headers and libraries
in the system directories. If these are not installed in system-wide
directories (or if you want to use an alternate MySQL distribution),
you may specify which MySQL directory(ies
我需要提供我的Python版本和项目包。
我该怎么做呢?
我试过了:
sudo apt-get install python3-venv
virtualenv my-env -p python3
source tutorial-env/bin/activate
这应该会显示已安装的软件包,但它会显示:
pip list
DEPRECATION: The default format will switch to columns in the future. You can use --format=(legacy|columns) (or define a format=(legacy|col
我对朱莉娅来说是个新手,只是想用JuliaV1.5.0安装LaTeXStrings。
using DataFrames
using CSV
using Pkg
using Plots
Pkg.add("LaTeXStrings")
using LaTeXStrings
但是我得到了以下错误
Resolving package versions...
ERROR: LoadError: Unsatisfiable requirements detected for package CSV [336ed68f]:
CSV [336ed68f] log:
├─CSV [336
目标:在CentOS 7停靠容器上编译和运行模拟Linux桌面的flutter示例 (注意:无法使用snapd -在Docker中不受支持)手动安装 我设法把其他的都弄清楚了,除了这个: GTK 3.0 development libraries are required for Linux development.
They are likely available from your distribution (e.g.: apt install
libgtk-3-dev) The others show OK:
Γú[Γ£ù] Linux toolchain - devel
当我尝试运行时,我使用的是oracle linux 7.9
(gdb) ls
输出为
GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-120.0.1.el7
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
我想通过matplotlib安装pip。然而,我遇到了一些循环问题,在某种程度上,我陷入了困境。在终端中运行pip会产生:
Traceback (most recent call last):
File "/usr/bin/pip", line 5, in <module>
from pkg_resources import load_entry_point
File "build/bdist.linux-x86_64/egg/pkg_resources/__init__.py", line 3080, in <module&g
我已经在我的Ubuntu桌面上安装了go,在我关闭电脑之前,它工作得很好。
现在,当我启动我的机器并继续我的项目工作时,我得到了这样的结果
$ go build
go tool: no such tool "compile"
go tool: no such tool "compile"
go tool: no such tool "compile"
go tool: no such tool "compile"
go tool: no such tool "compile"
当我尝试构建一个项目时。
我在断电前做
我试图在基于libudev的锈蚀环境中在fedora上构建一个生锈应用程序。目前,当我试图用cargo build --release编译应用程序时,我得到了错误:
error: failed to run custom build command for `libudev-sys v0.1.4`
Caused by:
process didn't exit successfully: `/home/me/myApp/target/release/build/libudev-sys-7d615f10fc24f9b2/build-script-build` (exit status
我尝试在一个租用的专用服务器上修复一个损坏的autodl irssi安装,运行Ubuntu18.04.1LTS(GNU/Linux4.9.0-15-AMD 64 x86_64)和Swizzin,方法是删除和重新安装Box autodl包。
移除autodl :-
SUCCESS autodl removed
ERROR dpkg database is locked by apt-get. Please try again later
试着重新安装它:-
INFO Installing autodl
E: Unable to correct problems, you have held
当我尝试构建一个conda包时,我得到了一个奇怪的错误。 $ conda-build pkg2
....
Found conflicts! Looking for incompatible packages.
This can take several minutes. Press CTRL-C to abort.
failed
....
The following specifications were found to be incompatible with your system:
- feature:/linux-64::__glibc==2.17=0
- fe
我正在尝试使用pkg add安装julia Flux,并收到以下错误。 julia> Pkg.add("Flux")
ERROR: The following package names could not be resolved:
* Flux (not found in project, manifest or registry)
Please specify by known `name=uuid`.
Stacktrace:
[1] pkgerror(::String) at /buildworker/worke
我正在尝试安装tidyverse包以便在我的脚本中使用gather函数。每次我尝试安装该软件包时,都会收到以下消息:
* installing *source* package ‘curl’ ...
** package ‘curl’ successfully unpacked and MD5 sums checked
Package libcurl was not found in the pkg-config search path.
Perhaps you should add the directory containing `libcurl.pc'
to the PKG_CO
当我尝试安装go工具时,/usr/local/go/pkg/tool/linux_amd64/cover的权限被拒绝。我可以接受这一点,因为它是/usr/local/目录,需要root访问。但我的第一个疑问是,当我将GOPATH设置为其他位置时,它为什么要尝试安装在这个位置。
$ go version
go version go1.2.1 linux/amd64
$ export GOPATH='/home/vagrant/repos/atlantis-router/vendor'
$ go get code.google.com/p/go.tools/cmd/cover
g