我让Edimax EW-7811在windows上工作,但是在Ubuntu上没有显示无线连接。
iwconfig显示
lo no wireless extensions.
enp4s0 no wireless extensions.
我遵循了这线程中的一些想法,但是我得到了一些错误。
如果我试图从Edimax - ./install.sh安装驱动程序,就会得到以下错误:
scripts/Makefile.build:258: recipe for target '/EW-7811DAC_Linux_Driver_4.3.19/driver/rtl8821AU_lin
我最初设法让我的tp链接弓箭手T2U在我的机器上工作,但在我安装了一些显示驱动程序之后,它似乎决定停止工作,但不确定原因。我试着重新安装驱动程序,但这似乎不起作用.
我是Linux新手,所以不太确定我在做什么
编辑: lsusb的输出
Bus 003 Device 002: ID 0bda:0161 Realtek Semiconductor Corp. Mass Storage Device
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux
我已经升级到最新的内核版本。
升级过程没有完成。当手动尝试(在终端上)时,我得到:
Setting up linux-image-4.13.0-25-generic (4.13.0-25.29) ...
Running depmod.
update-initramfs: deferring update (hook will be called later)
The link /initrd.img is a dangling linkto /boot/initrd.img-4.13.0-25-generic
vmlinuz(/boot/vmlinuz-4.13.0-25-generic
)
我昨晚做了个蠢事,在深夜更新了我的笔记本电脑,所以这一切都是我的责任。我更新了ubuntu并重新启动,结果发现Xserver无法启动。它声称这是由于日志中的分段错误造成的,但是在屏幕上的跟踪中却写着"evdi“(显示链接)。现在我知道这些displaylink驱动程序没有最伟大的声誉,在过去给我带来了一些痛苦,所以我运行了"displaylink-installer卸载“,系统就用Xserver启动了。太完美了。
然而,我确实需要在将来的某个时候使用我的外部监视器。
startx打印屏幕跟踪:
X.Org X Server 1.21.1.4
X Protocol Version
我一直在跟踪这个葛瑞波,在Ubuntu上手动安装Realtek驱动程序(22.04)。
到目前为止,我的理解是这个特定的卡没有被Linux正确地“识别”,所以手动驱动程序安装是一个解决办法。在过去的几个月中,在每个内核更新之后,问题都会再次出现,在dir rtl8852be上,我将重新运行以下命令:
make clean
make
sudo make install
Ubuntu会再次识别网卡,一切都会很好。今天,在Ubuntu更新之后,在系统重新启动时,我得到了预期的问题。按照通常的步骤,但继续
make
得到以下意外错误:
#rm -f .symvers.8852be
make ARCH=
编辑:这似乎是一个与Thinkpad笔记本相关的问题。
我正在工作一个新安装的ubuntu 20.04。
uname -r输出:
5.6.0-1047-oem
sudo apt upgrade输出:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following NEW packages will be installed:
linux-generic-hwe-20.04 linu
我使用一个特定品牌的电视调谐器卡(TBS技术),驱动程序不包括在内核中,因此必须在每次内核更新后重建。在安装昨天的内核更新到4.4.0-143-泛型之后,TBS驱动程序无法构建,但是如果我回到4.4.0-142-泛型,它们就能工作了。当运行make时,特别是当它试图构建一个名为videobuf-dma-sg.o的文件时,会出现问题,错误输出如下所示:
CC [M] /home/backend/Drivers/linux-tbs-drivers/v4l/videobuf-dma-sg.o
/home/backend/Drivers/linux-tbs-drivers/v4l/videobu
升级到10.10之后,我在启动ubuntu时遇到了麻烦。
在状态为0x0009的意外退出之后,它说:
Gave up waiting for root device: common problems:
- Boot args (cat /proc/cmdline)
- check rootdelay = (did system wait long enough?)
- Check root = (did the system wait for the right device?)
- Missing moduloes (cat /proc/modules; ls /dev)
ALERT! /d